Custom double din radio bezel
Ok, so I finally got to it and made a custom double din radio bezel to fit my headunit. I used a putty type of epoxy, like a plumbers putty. Two tubes cost me $8 at Walmart. Dries in 10 minutes, bonds really well and it's easily sandable. Here's some pics of the progress thus far.
First application of the putty to build out the bezel.
http://i939.photobucket.com/albums/a...2300817449.jpg
Rough sand and fit.
http://i939.photobucket.com/albums/a...2926830016.jpg
Test fit.
http://i939.photobucket.com/albums/a...2920379942.jpg
It's a lot of work. Sand, test fit, sand, test fit, more sanding, more sanding more sanding... I'm priming it right now. I first used a plastic primer then I used a filler primer to fill in all the little blemishes and imprefections, sanding inbetween each coat of primer. I highly recommend using filler primer if you're going to do this. Then after the filler primer I'll sand it again before I paint and clear it. More pics soon.