-
JDM/USDM mirror diagram
anyone have any type of diagrams? like for the pin holes on the switches
I found the wiring for the JDM switch thanks to Cali
https://www.thegalantcenter.org/viewt...pic.php?t=41677
But I dont know which wires to hook to the USDM wires.. any ideas?
http://i6.photobucket.com/albums/y20...ght/switch.jpg
http://i6.photobucket.com/albums/y20...oknight/fb.jpg
-
-
i've always wanted to get those mirrors so i'll ask a few questions.
If you have the mirror and the control module, what else besides a power wource would you need. I would assume that the wires from the mirrors would be color coded to the jdm wire harness? (but manufacturers are idiots so that would be too easy)
Looks like you get to right the tutorial for installation of JDM mirrors.
-
-
just wired the USDM switch back into place, gonna use a toggle style switch for fold/unfold
-
followed pinoys recommendation of a DPDT switch, got the left mirror full functional so far and fixed the gauge cluster problem at the same time. ridin no door panels and lower dash sucks though
-
soo what was wrong wit the gauge?
-
i just have mine hooked up to a dpdt switch, the jdm mirror switch is non operational
-
I have had my JDM folding mirrors for awhile now. I am going to have to come up with some type of wiring since my 7g doesnt have power mirrors.
-
if i remember correctly, all you need is the part of the wiring harness for the doors, someone along the line the wiring unplugs from the harness in the frame of the car between where the door and the frame meets, replace your non power harness with the power harness and accessories that go with it and put in the fuses that are required in the fuse box and thats it. The G's come with the locations and supposedly comes prewired for the stuff, only fuses are missing on most. I had an S,ES,LS.