Cleaned Throttle body and now Idle problem?
My throttle body was all gunked and sticking so I removed it to clean it. I removed the idle air control motor before cleaning and only cleaned it with a cloth wet with carb cleaner. Put everything back together and now it idles @ 1500 RPM. Is there a trick to resetting the IAC or installing it. It idled fine before.
I just reset the computer (disconnected the battery for 10 mins) and no change. I also put a light coat of lithium grease on the IAC O-ring in case it was leaking (can't buy it separate). Anyone who is replacing their IAC be careful what you buy, I noticed that the BWD brand does not come with the o-ring. Hell, for that much $ it should install itself.
car wont start after timing adjustments cleand the tb
hi im new here me and my dad got a 2000 mitsubishi galant 2.4l 4g64 i replaced the engine head bcuz the story i heard it got overheated not to worry bout that now i got the timing marks lined up and still no spark or fire i cleaned the tb and havnt checkd the IAC unit not sure if its fine or that has anything to do with it not firing it cood b the alternator but sounds like electrical problems i just need help and facts wat it cood b