How to clean the Mass Air Flow sensor
Caution:This Tutorial is just for reference, i am not responsible for any injury,harm or damage that cause by your mistake.............
After you driving your car every day, your MAF sensor will get dirty, this affect the car to collect the correct data, here is what we do to fix it.
Here is what you need:
A Wrench
socket
grove<---if you want,i didn't
A brain (for common sense)
Maf sensor cleaner
---------------------------------------------------------------------------------------------------------------------------------------------------------
Caution: don't use other cleaner, make sure the one you use is for MAF sensor, if not, you will damage the sensor and it cost 260 bucks to replace it.
--------------------------------------------------------------------------------------------------------------------------------------------------------
This is what i use
CRC MAF sensor cleaner. get it from Autozone, it is around $8............
http://i286.photobucket.com/albums/l...g?t=1215896788
First unplug the connector,loose the clips that holding the Air filter box, the bolt which holding the wire and the one connect the hose and the sensor.....
http://i286.photobucket.com/albums/l...g?t=1215898185
now you can take the whole thing off
http://i286.photobucket.com/albums/l...g?t=1215898157
This is the sensor, spray the cleaner inside the sensor 3-4 seconds and let it dry.
http://i286.photobucket.com/albums/l...g?t=1215897755
Follow those steps you just do to put it back and go take a drive, you should feel the different, at least i do.
Good luck
Sorry for poor english.