Independent fogs on a switch and relay
This is merely my experience with wiring independent fogs on a switch and relay according to Korty's directions found here \/\/
https://www.thegalantcenter.org/showthread.php?t=19055
Now the reason i post this is because i have a 2001 galant and as we all know, it has many differences from the 02 03 galant and i found that out while wiring and figured this would help.
I'd also like to apologize in advance if you think the wiring looks sloppy, i plan on fixing it sometime this weekend...
Anyways,
WHAT I USED:
-Automotive relay from Radioshack
-Automotive rocker switch with LED also from Radioshack
-Electric tape
-Spade lugs
-crimper/stripper/cutter tool
-14 gauge (i wanted 16 but we already had 14 so i figured it was fine) electric wiring
-Electrical diagrams in the Haynes repair manual
-dremel
\/here is the electrical configuration we are essentially wiring that me and my dad came up with using the trusty Haynes book :)
http://i143.photobucket.com/albums/r...0/DSC_0375.jpg
\/\/our spade lugs attached to the switch (3 prongs because one of which is a ground)
http://i143.photobucket.com/albums/r...0/DSC_0377.jpg
\/\/some dremel action to mount the switch
http://i143.photobucket.com/albums/r...0/DSC_0379.jpg
\/\/mounted in car (not fully attached at the time because of electrical issues explained later...)
http://i143.photobucket.com/albums/r...0/DSC_0382.jpg
\/\/NOW THIS IS WRONG: As you may see on Korty's wiring pictures he extends the White/Black wire coming from the fuse box and tapes off the other end but as i came to find out, on the 00 01 galants, that end of the White/Black wire leads to the front ECU and not the fog light relay!! So with some simple changes shown next...
http://i143.photobucket.com/albums/r...0/DSC_0380.jpg
\/\/...I show that i than crimped off the end of the White/Black wire going towards the front ECU and extended the other end going to the fog light relay (ya its a little close and I almost had to cut back some tape)
http://i143.photobucket.com/albums/r...0/DSC_0384.jpg
\/\/14 gauge wire pushing through
http://i143.photobucket.com/albums/r...0/DSC_0381.jpg
\/\/a final look (ya you can see my ghetto intake mod haha, cones a lttle big but a friend gave it to me for free)
http://i143.photobucket.com/albums/r...0/DSC_0385.jpg
\/\/\/\/PROOF
http://i143.photobucket.com/albums/r...0/DSC_0387.jpg
http://i143.photobucket.com/albums/r...0/DSC_0389.jpg