Printable View
Rebuilt the engine a few months back before I went to boot and never really had a chance to drive it more than 5 miles if that.. Just wondering if it would be safe or even wise to drive it 14hrs on the highway to my next command
Sent from my iPhone using Tapatalk
In short, yes its kind of a bad idea. The goal for engine break in is to allow it to heat cycle and run a varied loads and rpm. Now, if you take your time, and make sure to run different speeds, from like 50-80 mph, shut it down and let it cool for a few hours after 4 hours or so of driving you will be fine. Just gotta plan for that and increase your expected travel time. The other issue is that if something goes wrong most people try to make it to the next exit, and that will lead to more damage being done to the engine, potentially.
The first 100 miles you set the rings and break in the valve seats. Need to vary rpm and do some pulls to redline and then engine brake the rpms back down to set the rings. After the first 500 miles of proper break in you can do anything.
Damm that kinda hurts my heart. I guess I'll jus sell it then.
Sent from my iPhone using Tapatalk