Speed Sensor Illustrations
I know this thread hasn't been used in a while, but i know many members (2002-2003) are doing the manual tranny swap who can use this thread for help with the speedo. Even though I bought a speed sensor from cali, I decided to also help out with the process with illistrations.
edit: already in the tutorial section, my bad :icon_redface: :lol:
(Mods: i'll get actual pics of the harness and associated wires within this week for further reference.)
First, cali refers to the C-17 harness. The location of c-17 is on the left-hand side of the center console, near the accelerator pedal.
Figure-1
Source: Galant Service Manual: 80A pages 16&17
http://i165.photobucket.com/albums/u...17Location.jpg
(i'll try to take a pic of the actual harness sometime within the week)
the actual harness has 38 wire locations, pins 3 and 4 are on the upper right corner.
Figure-2
http://i165.photobucket.com/albums/u...-17harness.jpg
One of the other pages illustrated the connections of wires 3 & 4 from C-17 to the speed sensor. The dotted line means the wires are from the same connector (C-17).
Figure-3
Source: 80A page 89
http://i165.photobucket.com/albums/u...sandColors.jpg
I'm assuming the two wires (3&4) are for signal and power, and a third on the sensor for ground. I still have yet to wire up my speed sensor to test where each of the wires go. I'll also search for the diagrams of the speed sensor itself (not the harness), as well as show pics of the sensor later on.
Big thanks to Cali for the speed sensor, will try to wire it either friday or saturday. :orangesmile: