Quote:
If the Blister is at the surface and filled with fluid, you should take a sterilized needle and pierce the blistered skin. Pierce from the side close to the base of the Blister and let all the liquid flow out. If the affected skin is still intact then do not remove it. Instead, cover the drained Blister with moleskin. If the affected area is ruptured then carefully cut it away and clean the underlying new skin with rubbing alcohol or an antiseptic. If you have the time, you should allow the new skin to harden in the open air. If you need to move on again, apply moleskin and use gauze to keep the moleskin from directly contacting the tender new skin. Once the new skin has hardened a bit, you can apply benzoin or rubbing alcohol to further toughen up the new skin. Keep the new skin clean and sterilize it to prevent infection.
:smt065