I Would Pay For The Help!! Any Member Here Willing to Help!!

I Would Pay For The Help! Any Member Here willing to Help!!

http://i152.photobucket.com/albums/s...7/P1160092.jpg
http://i152.photobucket.com/albums/s...7/P1160091.jpg
http://i152.photobucket.com/albums/s...7/P1160090.jpg
http://i152.photobucket.com/albums/s...7/P1160089.jpg
http://i152.photobucket.com/albums/s...7/P1160083.jpg
http://i152.photobucket.com/albums/s...7/P1160084.jpg
http://i152.photobucket.com/albums/s...7/P1160081.jpg
Running on my H3 3000k Golden Yellow HID's thats all the light i have for now!
http://i152.photobucket.com/albums/s...7/P1160088.jpg
My Stock Gauges At Night!!
Well I need my headlights to be rewire the right way, so that both Hi and Low would work and i'm able to put Hid's on them!! i went to different places here in the Bronx and manhattan New York, but they want to make this a big deal!! right now i can only use either hi bean which is bad because it bothers other drivers or my foglights, i need my regular low bean to be running too!! anyone here willing to help!! i would pay for this service thanks and let me know what you think so far!! i have L.E.D's in my Signals, reverse,lisence plates, and more to come!! thanks

its lookin good, hopefully you can find the help you need

whats wrong w/ the lows? pics of harness? are they wired up at all?

do your corner lights blink hella fast with the leds in there?

^^^Shouldnt if all the bulbs are LED's They blink real fast with two different type of bulbs. Other than that they should be cool

fuse might be blown

Quote:

---

Originally Posted by fatal1

whats wrong w/ the lows? pics of harness? are they wired up at all?

---

the car only have the factory harness that works with the H4 bulb only, all i did was to plug it into the H1 on the JDM Heads and the only way they work is to open the switch as you normally do and set it to hi bean!! thats how they work other than that nope!!

Quote:

---

Originally Posted by lonestar22

fuse might be blown

---

no is not everything work just fine!! all i need is to have my JDM Heads as you guyz in here to work properly!

Quote:

---

Originally Posted by underated

do your corner lights blink hella fast with the leds in there?

---

yes they do, but i just bought some resistors to make them blink slow! in less word factory style!

Contact Goosey. Hes the wiz when it comes to this type of stuff. Also there should be a tutorial to do this.

Quote:

---

Originally Posted by devgrp

Contact Goosey. Hes the wiz when it comes to this type of stuff. Also there should be a tutorial to do this.

---

thanks a lot man, but thats why i'm willing to pay because i'm not good at this wiring thing!! but i'ma contact him thanks!!

sounds like you did not splice the old harness into the JDM harness?

You will need to make a wiring harness with 2 relays, one for the low beams and one for the high beams, with i diode in between the positive leads...... AKA, installing HIDs the RIGHT way.

Give me a second to find the tutorial that i used from HID planet for mine...........



OK here is the link....http://www.hidplanet.com/forums/view...t=6612&start=0

I would post the image on here but some people dont like you to post their info and schematics on other sites without permission. What you are looking for is about halfway down the first page labeled "H4 to Bi-xenon or 2 bulb circuit". It doesnt cover the diode trick in that particuar schematic, but if you scroll down that page there is another one that shows you how to do it. The diode is what you need to have the lows and high on at the same time.

If you are'nt too good with wiring then you might struggle with this one, as you can tell from the pictures its kinda complicated. There are people HIDplanet.com that make harnesses for people in your situation for money, but they can be anywhere from $50-$100+. but that may be your only option. It took me a couple days to make a Bi-Xenon harness for my E46 projectors, and i dont really have time to make another one right now. But one of the other members with knowledge of electronics might be able to.

what kind of LEDs are those in your gauges? Mine are really dim, probably because theyre only single LEDs... Thanks

Quote:

---

Originally Posted by jeremyl464

what kind of LEDs are those in your gauges? Mine are really dim, probably because theyre only single LEDs... Thanks

---

http://i152.photobucket.com/albums/s...7/P1160093.jpg
yeah, thats why!! mines have one in the center and 4 accross!!

Quote:

---

Originally Posted by ericbla03

You will need to make a wiring harness with 2 relays, one for the low beams and one for the high beams, with i diode in between the positive leads...... AKA, installing HIDs the RIGHT way.

Give me a second to find the tutorial that i used from HID planet for mine...........



OK here is the link....http://www.hidplanet.com/forums/view...t=6612&start=0

I would post the image on here but some people dont like you to post their info and schematics on other sites without permission. What you are looking for is about halfway down the first page labeled "H4 to Bi-xenon or 2 bulb circuit". It doesnt cover the diode trick in that particuar schematic, but if you scroll down that page there is another one that shows you how to do it. The diode is what you need to have the lows and high on at the same time.

If you are'nt too good with wiring then you might struggle with this one, as you can tell from the pictures its kinda complicated. There are people HIDplanet.com that make harnesses for people in your situation for money, but they can be anywhere from $50-$100+. but that may be your only option. It took me a couple days to make a Bi-Xenon harness for my E46 projectors, and i dont really have time to make another one right now. But one of the other members with knowledge of electronics might be able to.

---

i really appreciate the help and info, but thats why i'm willing to pay for someone to do it for me here in the New York Area, i could go either Bronx, Queenz, Brooklyn or Manhattan or Long Islang if anyone here can do it let me know and i could meet up!! if not then i probably will go back to my OEM Heads!! thanks

Quote:

---

Originally Posted by djflex167

i really appreciate the help and info, but thats why i'm willing to pay for someone to do it for me here in the New York Area, i could go either Bronx, Queenz, Brooklyn or Manhattan or Long Islang if anyone here can do it let me know and i could meet up!! if not then i probably will go back to my OEM Heads!! thanks

---

Quote:

---

Originally Posted by ericbla03

There are people on HIDplanet.com that make harnesses for people in your situation for money, but they can be anywhere from $50-$100+. but that may be your only option.

---

moved topic to 8g problems