i need a picture of the inside of the trunk lid where the holes are drilled for mounting the wing so i can mount mine..
Printable View
i need a picture of the inside of the trunk lid where the holes are drilled for mounting the wing so i can mount mine..
Just ship it to me ill mount it on my trunk and then you will know where it goes. Lol.
There should be little round marks in the trunk support where you could just fit a wrench in, should mount up in the same location as our usdm one.
take a look at 4-grims build thread i know there are pictures on how he mounted his.
here is the link shows how he lined it up you should just shoot him a pm.
https://www.thegalantcenter.org/showthread.php?t=28568
Mounting the VR4 wing gets tricky as you may think it would mount on the same spots where the regular USDM spoiler would mount since there are provisions where the mounting holes would be at.
The bad news is that the VR4 wing doesn't mount on the same spot as USDM spoiler would. The build thread that Galant306 posted, you will see that I put painters tape to guide me as a template where to drill the holes for the VR4 wing. It gets tidious, but take your time. The center post of the VR4 wing takes a bit work as you have to drill a hole for the wiring for the 3rd LED brake light and mounting screw.
I will post pics tommorrow if I have some time.
Mine mounted right into the USDM spots. No modification needed.
My usdm spoiler and VR4 spoiler are interchangable.
and wereso on both of my GS's
use the exact same mounting points.
My trunk didn't have a spoiler originally but it seemed the provisions where it where you would drill for the holes were different.
yea i dont have a oem spoiler also.. maybe it was only with the GS that the holes lined up properly?
GS came with spoilers from the factory. NOT as a dealer installed option.
You'll see a lot of 7g's with spoilers that came with the car,
but they'll also have a rear dash 3rd brake light(this is because the dealer installed the spoiler) so when they hit the brakes both the spoiler led and the rear dash 3rd light come on. There is nothing in this world I hate more than to see this.
In my rear dash, the rear dash trim hasn't been cut and there is no 3rd brakelight housing.
yea weird i wonder if the 7g sohc models and 7g GS share the same trunk lid.... i already took my rear d eck 3rd brake light off and was getting ready to go over the whole rear deck with a new fabric so the spot for the 3rd brakelight is gone..
it's only the tail cavity that is diffrent. where the 7GA has the red strip where it says galant they gave us a panel that is body colored that says galant.
the thing dave has for sale http://i37.photobucket.com/albums/e5...ictures058.jpg
Ok I stand corrected from my previous post about the USDM mounting points not being the same as the VR4 wing. Its been awhile since I mounted the wing, but I checked this morning and yes..the provision marks are there on where to drill the holes for the mounting points for the spoiler.
Mine were off by half a inch because I wanted to mount the wing as near to the edge of the trunk lid and where the mounting points were marked wouldn't allow that so I drilled the holes a half inch closer to the edge of the trunk lid...my bad for the misinformation.:(
the pics and info are awesome guys! thanks so much. i imay mount my wing when i get home today
i cant wait.. im also gettin the rear tails n garmishj from dave to do the taillight conversion