my transmission are going wrong, i wanna swap it, but i dont know what to put on,, its a 6g72 8g,,, any suggestions?:066:
Printable View
my transmission are going wrong, i wanna swap it, but i dont know what to put on,, its a 6g72 8g,,, any suggestions?:066:
Started sanding down my car today at work. Too much work.
everyone want one after i get it lol.
Just bought a new set of wheels
Pics!Quote:
Originally Posted by 99galantES
Don't have them yet its the set I had posted for $1400 I'll have them in like in two wks
That pic doesn't do it justice lol
Nah not really lol
I remember you posting that link. Those are sick wheels.
Woke up to a flat tire so I went to get it patched; and right after I get there the battery starts to fade. So I had to buy a new battery as well. This is the best day ever!!!!!! Lol!!!!
That's what's up Carlos can't wait homie!
Damn that. SucksQuote:
Originally Posted by pittstop11
Yeah me either never spent that much on a set of wheels but worth itQuote:
Originally Posted by wetamup2k3g
You sure it was the batt and not the alt?, happened to me a couple of weeks agoQuote:
Originally Posted by pittstop11
@99galantES
What make and model are they?
They are weds kranze mesh I'll post a better pic these are the wheels
http://i1102.photobucket.com/albums/...A5A49-orig.jpg
Yeah Im pretty sure. I did a thorough check before I detrmined what it was. Now I need to get my CD player functioning again. I got that "CODE" display when I turned the car on.Quote:
Originally Posted by OMEGA PHX
Man I really like those wheels
Hey guys, I finally got my shifter trim painted. I put lots of coats...maybe too much and it's all soft. I put it on and my finger prints were there but then it evened out even tho i let it dry for a day lol...
ANYWAYS I wanted to get your opinions on this:
http://www.ebay.com/itm/JDM-Mitsubis...ht_2809wt_1163
I wanted to get it since I might get projector fogs and want the grill mesh to match PLUS I wanted to put a ralliart emblem in the front grill and it won't fit with the stock 8gb grill but it might fit stock 8ga...anyways, thoughts? suggestions?
I like the looks of that grille set...but too expensive IMO. But LOL at the description, the 8G USDM FL was never sold in Japan.
Yeah it is expenisive but when I googled it, it was a lot more expensive. Even if I didn't make an offer this one is cheaper. Sucks I just bought replacement grills before i saw this....Anyone want a pair of black 8gb grills? :D
also if i get this grill, what can I put behind it (if anything) so it looks better?
Haha, I'm gonna keep an eye out for these at a lower price though...I'm liking them more and more.
Lol let me know and would you get it?
And look they go for 128
https://www.google.com/webhp?sourcei...w=1600&bih=815
Can't you guys just cut out the gills and then put mesh behind them?
JD and eBay! Lol!
Not hating bro! I shops the bay too...
I could, but I'd still need another set of grilles to use while I'd work on the stockers. If I get them, I'll tinker with old ones.Quote:
Originally Posted by Guzm4n
Are those canards on the stock bumper, hood clamps on a stock hood, and those extra fogs under the grille? And those grille are made out of fiberglass they are little heavier than the stocks. I do agree with Guzm4n about cutting the grilles (or let someone cut them for you) for a way cheaper price.Quote:
Originally Posted by JDyal
http://members.shaw.ca/jdmparts/gala...illssample.jpg
Lol Idk and i thought about cutting the stock and putting mesh on but it wont work well since there's no flat surface and the 8gb grill is curved so if you cut it, it wont be flush and look bad
Man if only i didnt throw away the one stock i had to mess with, I was thinking that but then thinking these were done so i'd save to buy it
You should still be able to fit it. I once put mesh on my 3G cuz I hated the look of the condenser and plastic shroud under it, and iirc there was a long u shaped cooler line for the P/S.
http://i1199.photobucket.com/albums/...r96/Grills.jpg
Fogs not matching heads, idk why. They matched in person, they were both 8000k I was an HID Newb.
So you think I should cut the grill and put mesh on it? I gues if i cut the angled part, sanded it to make it even and painted it....that could work but idk if there's a good flat surface to put the mesh on behind the grill...do you glue it?
Vic the reason the colors don't match is because of the optics of the projectors. Plus it looks like your in the cut off lol
You could use bondo to stick the mesh to the grille
You think it could work? If so I'll cut my grills tomorrow
Bondo and plastic don't bond well. You're better off fiberglassing the mesh in.
A good amount of smoothing out would be needed after cutting out the fins from the grilles. It can be done though. I'd put the mesh from the back, though.
It's what I used on my 99 grille when I did the the grille modQuote:
Originally Posted by JDyal
How would you fiberglass the mesh in?
Nobody noticed the galant in the background...? WOW!:017:Quote:
Originally Posted by oakrdrs187
Well I taught 2 people to drive stick today and I think my clutch is getting toast.
My black housed headlamps finally showed up. Installed today.
Funny thing is, the actual color was closer to that of the projectors.Quote:
Originally Posted by carl3g
That's how the first owner had the grill on there originally. Overtime the shiny finish got ugly so I removed it and re-did it my way. The way I did it was by a few strategically put screws, not noticeable. They were about 1/4" self taps, work for me.Quote:
Originally Posted by Skyforger
My neighbors, that car is one big dent, all the doors are bent awfully, obviously the rear is too. There are about 20 folded pieces of paper holding his loose dash from shaking, and his vents. There's a screwdriver behind the passenger front window from falling, headliner is droopy. Poor car is only an 01 with about 120k. People don't care about their G's. He sees mine and just has that look of "wish mine were like that"Quote:
Originally Posted by DTP