Yeah...as soon as school and my job stop stealing my free time I should finish it. Kind of embarrassing how little is left to do with the car.
Printable View
I'm almost certain a 4g63 SOHC distributor would have to be rewired as well, kinda removing the point of swapping our distributor.
yeah but if at all it would be no more than a few wires. what? like 4 at best?
or you could buy my swap...... thud.
Easy, take a 4g15 Distributor:
http://i56.photobucket.com/albums/g1...L/488c742c.jpg
Machine the part in red, and make a little lip to put a new retainer a that's the "magical trick", fully tested to work the Red Mirage has run 13.8@96mph:smt096
The Distributor will end exactly like the CAS:
http://www.roadraceengineering.com/e...cas-180out.jpg
No need to rewire, since the G64/G15 use the same plugs with the wires in the same location.
Siguel..you would gets lots of hugs and kisses from several people on this board. :cool:
When this thread was posted several years ago I went to a salvage yard and tried several distributors on a 63 head and found a distributor that seemed to bolt up but the problem was the "slot" that goes into the head and for the cam groove. I
Obviously I gave up, but if I was more persistant...maybe I would of came up with idea like you did, of machining that slot. :slaps head:
My path has somewhat switched lanes all of the sudden:cool:
I recomend if you have the CAS, take it to the machine shop and tell them to make the DIstributor the same shape as the CAS, that what I did.
SO does this mean you can use your Stock ECU with this distributor???
Iam going to go and punish myself now for not thinking of this... I found a shop a year back as well that did this conversion and emailed them about it.
They use a custom distributor setup and wouldn't elaborate any further. I believe they wanted about 150.00 for this so called magic distributor that they could reproduce :(
Well Good work SIGUEL, Now I have yet another Item to pick up the next time in the Junk Yard... Thanx for posting up...
word
i see....... time to find some mirage distributors!
what would i do with the 2g ecu when i what to use it plug and play or lil more modding
"my name is detective Carter!
Do you speaka' any English?"
C'mon dude at least make some sense!
All I can say is wow, *begins slow clap and sheds a tear*
Damn, I scrapped the 4g15 out of my Mirage and trashed all the other parts. Looking at the picture of the engine I see your not using the 4g63 motor mount, is that for a mock up or are you using it. Cause my may already know the 4g63 motor mount doesnt fit in the 4th Gen Mirage?