luck
Sent from my SGH-T679 using Tapatalk 2
Printable View
luck
Sent from my SGH-T679 using Tapatalk 2
I went to open the envelope in my bathroom room because that was the closest room with a garbage. So the keys fell on the group and I took a pic of it lol could be pubs
^ That'd be some long ass pubes!
Looks great, good job on the retrofit. I want to do same with switchbacks.Quote:
Originally Posted by JDyal
Thanks man and go for it, it's the whole project is not as hard as it is tedious
Hey what lip is that?Quote:
Originally Posted by JDyal
And congrats on the projectors they look real nice. And very well done.
Looking good!Quote:
Originally Posted by JDyal
Nice job on the projectors, JD.
Thanks all and the lip is temporary one it's a foam lip from
eBay from e-z lip
Washed my car even though it's raining. Some fools at my job thought it would be okay to manufacture wooden pallets outside right next to my car before the rain came, so then it rained and dryed up, I went outside and saw my car covered in sawdust droplets. Used the high-pressure rinse and it came right off, but now it's raining again :(
got the old style front painted, touched up the fog lights and clear coated them, shaved a spare valve cover welded in some 12an fittings and got it powder coated, welded up a catch can with breather port. Finally got my injectors. going to be a busy weekend, pictures coming soon.
Jimney Christmas! LOL! Thats a mouthful! You will be busy this weekend lol!Quote:
Originally Posted by underated
Just ordered 40 Allen head bolts
Sent from my rooted 3VO using Tapatalk.
Well me and my homie tackled installing my suspension..finally after a little over a year I'm back in a lowered car! Ill work on getting a pic or two when there's daylight. Pretty sure I'm the lowest galant in my city lol..hope it stays that way.
^ Pictars!!!
Just bought 2 Ingalls rear camber kit, one set for each wheel:
http://static.summitracing.com/globa.../IEC-35860.jpg
Got my Oil Catch can by JM Fabrications with -8 AN fitting. Very nice piece.
http://i726.photobucket.com/albums/w...o/a7fbd66c.jpg
http://i726.photobucket.com/albums/w...o/086ee2b1.jpg
http://i726.photobucket.com/albums/w...o/9eac91e8.jpg
How much was it??Quote:
Originally Posted by Isaurio
About $115 + shipment or so, at their website.
http://www.jmfabrications.com/store/...-Catchcan.html
Also did some Cell smoothing for stock rom.
http://i726.photobucket.com/albums/w...ingexample.jpg
how do you know how many washers to use do you just put them all on then let a shop adjust them?Quote:
Originally Posted by IVORY_G
depends on your camber. shop will adjust accordinglyQuote:
Originally Posted by Redhaze
http://i795.photobucket.com/albums/y...427_073920.jpgQuote:
Originally Posted by oakrdrs187
As promised, but I only shot one pic. Car was slightly dirty anyway, so I was a lil camera shy about it lol. I think it's a decent drop for springs, more than I thought it would be. Just in case anyone is wondering... 3g springs by Tenrai and gr2s, 18x7.5 42 et wheels
Suspension is only like a day and a half old lol, so I'm wondering if the springs still have to settle and I might end up a tad lower :FIREdevil: lol. BTW I set the res a tad higher so the wheel gap would be easier to see, since I shot early this morning. It was still kind of dim out. So that's why the paint looks pearly lol
What did I do today though?..nothing but remove the sticker I had on the side mirror, and take all the old suspension out the trunk to store it...hard days work lol.
nothing big but: https://www.thegalantcenter.org/show...t=37749&page=8
Just bought an LED bulb for my license plate & a 6K H1 HID bulb for my sonars.
Got 2 boxes today :D
http://img.tapatalk.com/47c7b886-2da6-cae1.jpg
Sent from my HTC Sensation 4G using Tapatalk 2
Washed, claybar, polished, waxed the G today and got 15 dollars of gas to last me till payday lol
Soldering my tails so the g can be ready for an upcoming meet, first time soldering so wish me luck!
---
I am here: http://tapatalk.com/map.php?gm40ql
G'luck Guz! Soldering is a little tricky, but once you do a couple wires, you should see what works for you and keep doing it. I'm a noob myself, but I did my sound system harness with no problems. Wet sponge works wonders for cleaning the tip, a small dab of solder on the tip right before you solder up two ends and then inserting the solder into the wires after you've heated them up for a little while worked for me to make a neat, secure connection. I hope that helped some.
Good luck, just remember to put the heat skrink on before you start soldering! I've only soldered ceramic headlight plugs on my eclipse, oh and my stupid foglights in the grill,lolQuote:
Originally Posted by Guzm4n
Well, soldering was easier than I expected, got my tails installed and everything is working great:
http://img233.imageshack.us/img233/2...r3093955pm.png
sexxy
Good job
Got my allen head bolts in yesterday. Still waiting on my tails & my 74TB IAC pigtail
Picked up some lugs
http://img.tapatalk.com/47c7b886-0206-bd60.jpg
Sent from my HTC Sensation 4G using Tapatalk 2
I got ASA (caps) and am looking into getting the prices I only have prices for 94 3000 GT
Sent from my BlackBerry 9360 using Tapatalk
Nice lugs..I gotta replace mine, got some minor surface rust. But first I have ro decide on a color
I like it
Awesome.