Looks good
^This is exactly what you need to do to complete the look. Stretched tires look good when executed correctly.
http://www.e90post.com/forums/attach...1&d=1248141050
But ^this is going way too far IMO SMH
Printable View
Looks good
^This is exactly what you need to do to complete the look. Stretched tires look good when executed correctly.
http://www.e90post.com/forums/attach...1&d=1248141050
But ^this is going way too far IMO SMH
Yea, it should fit nice with a little more camber (plenty of room to do so). With or without flares too. Though as it sits they would be beautifully flush with the jdm flares, though I would do a complete rear fender pull.
No, they should clear fine without flares and just more camber. Just was wondering if you had planned for flares or not ;)
I have done a lot of extreme fitment on our cars. 19x10 +25 19x9.5 +25 & +40. 20x9.5 +37. Among others...
I like it and would do it if it wasn't driven daily when I had my 20's my lip stuck out like that I took one of those sewer shits and bent the inside of the rim
Got an inspection today and then put my tinted tails and retrofits back on and later Installed a V6 TB and a CAI.
http://www.stanceworks.com/forums/sh...t=7714&page=10
Read this, great stuff.:041:
lol, I was like, wait I know that g...
i pulled my rear fenders no problem ill get some detailed pics later tonight... the fronts you have to be careful with, because if you go to aggressive you will create a gap between the fender and the door. i will also take pictures of that lol. learned the hard way
You can always cut the fender lip too, I did that front and rear.
im still at the body shop working on my bumper. thank god they are sooo busy they are open 24hrs, i plan on stayin til at least 1am, did I mention, i gotta work at 6am.....fack!!!
well next thing i know im getting is a camber kit.. but im assuming the same size wheel would be to much for the front right? there are two options as far as something smaller what do you think would be best to go with....
there is either a
18x8.75 with a 20 offset
or
18x8.75 with a 35 offset
I would suggest 18x8.75 +35 with the same size tires.
Although thinking about it, depending how much camber you want to run up front you could run the +20 offset wheels. How much camber or how aggressive do you want your wheels?
I did that for MOD last year. I was literally installing my headliner and door panels at 12am, went to bed at 1am, woke up at 5am and headed out with the car on the trailer. Got a flat on the trailer near my uncles house in NJ, had to unload the G and leave it on the side of the road (a very difficult decision) and then go back for it a half hour later. Then drove the G the rest of the way to MOD
Ohhh yeah the bumper is in primer right now..... Should be painted on monday or tuesday.