Nice eye patch. Lol
Thats the lip i want btw
It looks good
Printable View
Nice eye patch. Lol
Thats the lip i want btw
It looks good
Question...did you have to cut much. Still been debating on this as I'm looking for a way to make my front aggressive..especially since I'm going back to clear fogs instead of my yellow ones. The yellow clashes with mh blue lugs from a certain angle I feel.
Anyway was the lip for an integra and if so what year? If you have a ebay link that would be great. If I get it my plan is to 3m double tape under the middle..and two small screws/bolts perside on the inner edge..like where the splash guards are in the wheel well
http://i371.photobucket.com/albums/o...710_232709.jpg
And a k&n intake for the Subie.
http://i371.photobucket.com/albums/o...710_195224.jpg
Sent from my SGH-I777 using Tapatalk 4 Beta
hahah thanks! it's from a 98-01 Integra btw if you're interested
This is where I bought it from: http://www.ebay.com/itm/360608141153...84.m1439.l2649
all i really did was trim a little bit in the middle and that was it, but it might be a little different if you have the 99-01 front bumper. It only took me about 20 minutes of trimming with a cutter then i was able to mount it like what you see in the picture.
That lip looks fresh On the new style usdm bumper...dtp what color is that valve cover...powdercoat?
Bullshittin on Craig's list yesterday and came across this...
http://i1188.photobucket.com/albums/...92BDC97A48.jpg
http://i1188.photobucket.com/albums/...EF1EBB9864.jpgSince I took my EVO wing off I have these holes and IMO the EVO wing (just like everyone said) was a lil too big and gawky ...I've wanted the oem GTZ wing for a while because it just kinda flows wit the contours of the car the best. So anyhow, hood...carbon fiber----roof....gloss black-----and now the look should be complete trunk/wing.....gloss black.
I'll make sure to post some updated pics, hopefully this trunk/wing is clean and not covered in the Mitsubishi cancer
Put the whole trunk on for shits and giggles. Might flow good.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Just picked these up for my Maxima
http://i16.photobucket.com/albums/b2...ps92e1ebac.jpg
http://i16.photobucket.com/albums/b2...ps979e542b.jpg
Sent from my Transformer TF101 using Tapatalk 2
Burned through an entire tank of gas on the road course today.
I wish you would put them on the g
Went ahead and ordered https://www.theretrofitsource.com/pr...oducts_id=4121
Bought a V6 Throttle Body from a local junkyard and will be finishing the install tomorrow. What can I do with my old i4 Throttle body?
Changed brake pads on the 8g and oil change.
Sent from my SGH-T879 using Tapatalk 2
Dropped a motor and tranny in a S13 240
Got my new axles on her and took her for a test drive. Next thing to get is motor mounts and shocks/struts. But my vibration is fixed and she drives better than ever!
well, something I got done yesterday, finished up trunk mounting my battery
Seafoamed it thinking it would unclog my EGR but it failed. Also did an oil change and changed my hids to 12k purple temporarily.
Sent from my Galaxy S3 using Tapatalk 2.
http://img.tapatalk.com/d/13/07/18/y7ezuqu9.jpg
Put in my halo projector headlights I got today. Haven't got the halo rings and the 3 LEDs on each one wired up yet.
nice! That car is coming together nicely.
That old bumper you had, was that a duraflex version or actual JDM?
Thanks! the old bumper was a duraflex version.
Threw my Morimoto hids in my accords projectors. They came out pretty good I must say. And that's coming from a guy who's anal about hid/retrofits. I think I just saved me ~$600 on parts for a retro.
Obligatory output shots will be up some time this week when I have time to whip out the dslr.
Had to clean the IAC so I also fixed my intake bracket. I had heated this piece of steel when we were having a bonfire and hammered over a mini anvil I found in the garage. It had hole pre drilled but I re-drilled my own for size/ Fitment. Not too shabby and it holds solid.
http://img.tapatalk.com/d/13/07/18/y6yte2u2.jpg
http://img.tapatalk.com/d/13/07/18/e3yzy4yd.jpg
http://img.tapatalk.com/d/13/07/18/a8upe4ap.jpg
Changed out my ac compressor and evap tank ....this heat wave has been a killer :/
ICE COLD now...oh btw, 3rd galant and tell me why I realized today that for some strange reason "cabin filter" behind the globe box is not there for me this 8g is a 01, I've had a 99 and a 2000 and they both had it...this one looks like it would be there but there's no removable cover ...I'm clueless why mitsu would do that?
Been busy with my job, today I had off so I put a new fuel pump in the Galant and it started right up (it sat for a bunch of months and gas turned bad and clogged fuel pump). Also did a Royal Purple oil change. I also got JDM fender flares in the mail today from Qcustoms. It was a good day.
Nice bro...make sure to post some pics of those flares on the g...what kinda symptoms led you to the thought that the fuel pump might need to be replaced?
Hey fox brand .....how did that battery relocate work out...what route did you go.
I ran mine through the driver side fender then into the firewall under the dash. Then on the very edge under the carpet. There is a "tunnel" u can feed the wire through under where the hump that the seat belts to so u don't have to run it over and have a hump in your carpet.
Sent from my Galaxy S4
Test fitted 18" mustang rims, since i really want some beefy rims i think they could look good with coilovers.
http://img197.imageshack.us/img197/3487/i636.jpg
^Noice!