Re: Auto -> 5spd conversion...
Quote:
Originally Posted by seth98esT
Parts you need:
7g/2g turbo 5spd transmission
7g/2g turbo rear 5spd transmission perch
7bolt Flywheel
Clutch/Pressure plate
Clutch master cylinder
Clucth slave cylinder
Clutch hydrolic line
Clutch line
Shifter assembley
Shifter cables
Shifter cable bracket
4 metal clips to hold the shifter cables to the bracket and to the shifter assembly
5spd Brake pedal assembly
5spd Clutch pedal assembly
Thats pretty much the parts list ladies and gents. The place fo the master cylinder is market, just cut the holes out and bolt it up. Everything else just replaces the Auto stuff. You might need to wire up a relay for to be able to start the car, I am not sure. I know 4g64terror did something like that. Anywho here is his pics:
http://www.imagestation.com/album/?id=4290548787
(No you do not have to pull your motor, just drop the tranny stright down and jack the new one up)
Guys my auto tranny broke yesterday :cry: and i was searching and this post is what i found, i guess this all i will be needing to have the convertion done. My mechanic is going to charge me $175 dollars to have my auto changed to a manny. https://www.thegalantcenter.org/styl...ault/laugh.gif
Re: Auto -> 5spd conversion...
Quote:
Originally Posted by Joaltava
Quote:
Originally Posted by seth98esT
Parts you need:
7g/2g turbo 5spd transmission
7g/2g turbo rear 5spd transmission perch
7bolt Flywheel
Clutch/Pressure plate
Clutch master cylinder
Clucth slave cylinder
Clutch hydrolic line
Clutch line
Shifter assembley
Shifter cables
Shifter cable bracket
4 metal clips to hold the shifter cables to the bracket and to the shifter assembly
5spd Brake pedal assembly
5spd Clutch pedal assembly
Thats pretty much the parts list ladies and gents. The place fo the master cylinder is market, just cut the holes out and bolt it up. Everything else just replaces the Auto stuff. You might need to wire up a relay for to be able to start the car, I am not sure. I know 4g64terror did something like that. Anywho here is his pics:
http://www.imagestation.com/album/?id=4290548787
(No you do not have to pull your motor, just drop the tranny stright down and jack the new one up)
Guys my auto tranny broke yesterday :cry: and i was searching and this post is what i found, i guess this all i will be needing to have the convertion done. My mechanic is going to charge me $175 dollars to have my auto changed to a manny.
https://www.thegalantcenter.org/styl...ault/laugh.gif
NOOOOOOOO. people need to stop taking their cars into their mechanics to get these kind of projects done. buy a honda if you're going to do that. i wrote the biggest overly-detailed tutorial for the 5spd swap, and no one is using it :cry:
if something breaks or goes bad or needs to be adjusted, you'll know exactly what to do. now you'll have to wait, call your mechanic, have him butcher some solution for you, and then pay him again for it. and if you do it yourself you can actually learn something https://www.thegalantcenter.org/styl...ault/smile.gif