did anyone figure out how to have the taillights on with out the headlights? i wana hook up my fogs so they can come on with conner lights when i want
Printable View
did anyone figure out how to have the taillights on with out the headlights? i wana hook up my fogs so they can come on with conner lights when i want
<div class='quotetop'>QUOTE(Its Reu)</div><div class='quotemain'>did anyone figure out how to have the taillights on with out the headlights? i wana hook up my fogs so they can come on with conner lights when i want</div>
With relays (such as the one pictured above), you can in theory use any switching source you want. You are not limited to the parking lights as your switch source (since it's not a power source, it's only a switch).
-Davide
If the military base is giving you any grief (which I call BS on) then tell them to take it up with Mitsubishi as they are on all the time.
They are low cycle lights, bright enough where you can see the car but not bright enough to blind someone.
The gas mileage difference, don't make me laugh too hard...wooo I bet significant to them is 1/4-1/2 City MPG at maximum. If you’re THAT worried about gas mileage tear your A/C out, your P/S out, your radio, anything electronic and you’ll save at most a MPG…
Now let's talk about HID's, every damn last one of them blinds me as I'm going down the road that's aftermarket or changed from jspec...why because the car's are on the other side of the road over there so the cut off/angle pattern is different than US - Spec. There's a reason why they need to be D.O.T. Cert, so they don't blind people.
what ya talking about? hids in cars with projectors or non projectors? other cars or the galant 9th gen? es,ls, or gts?Quote:
Originally Posted by Tech_Greek
I would say, the reason why they blind you is not because of the cut-off angle of the lens--which can be adjusted btw--but because of the type of bulb they bought. The higher the operating tempteraure of the bulb, the more glare you will see (longer wavelength of light diffuses more), regardless of the lens, or lack thereof.Quote:
Originally Posted by Tech_Greek
There is a tendency to think that more is better. So it's easy to think that a 8,000K HID kit is better than a factory 4,300K. But this is not the case with HID. The light output decreases the higher the temperature Kelvin (K), and will strain your eyes on long drives. That's why it's good to stick close to a 4300K bulb.
I would personally not go higher than 6000K (a 6000K bulb usually looks slightly purple, simialr to the color of the factory audi/bmw HID's, but not quite as bright). Anything higher than 6000K will glare too much and not put enough light on the road (it's much too blue for my taste as well). Even 6000K bulbs will get tiring on long drives, which is why I like to use my yellow fog lights in conjunction with the HID's; together the purple and yellow mix to make a more soothing and tolerable range of light for long drives.
No these guys are driving around with the white HID's blinding me, not blue at all.
you sure they're not just high beams. :wink:Quote:
Originally Posted by Tech_Greek
Very possible but they need to go back to the DMV if they don't know the high's are different than thet lows...Quote:
Originally Posted by Rising_Suns
If your talking about other cars too then yes. Unfortunately, people do use HIDs on non projector headlights and thats why they blind the incoming traffic.Quote:
Originally Posted by Tech_Greek
<div class='quotetop'>QUOTE(Tech_Greek)</div><div class='quotemain'>Very possible but they need to go back to the DMV if they don't know the high's are different than thet lows...</div>
I don't think high beams are meant to be used with oncoming traffic, due to the angle and brigthness of the light. Not only are they brighter, but they are often angled upwards to spread the light out more.
Those kids should not be leaving their high beams on in the middle of traffic. Doing so puts themsevles at risk, as well as the safety of those around them.
Ok I got how to wire the DRL to the parking lights so that when you turn on your parking lights, the headlights come on. What if i wanted to keep the parking lights the way they are. Is there a way that I can wire the DRL lights to only come on when I actually turn it to the lights from the light switch? What wire do I use and where?
any body wid an answer?
On the non-projector 9G lights I noticed there are 3 wires, is one of them the DRL? can I just snip it and get it over with? Thanks for a great write up.Quote:
Originally Posted by LOST
I personally was thinking about this whole thing while messing with my car one day...
The DRL only come on when the ignition turns on, so all you need to do is find a wiring diagram and clip the wire that tells the relay/switch that there's power + ground going to it and problem solved...it never sees that the car is on so you never have to worry about DRL.
On the non projected 9g lights, there is only one bulb for low/high beam thus explains 3 wires.Quote:
Originally Posted by gc86
low,high,ground.
any luck with this?Quote:
Originally Posted by Tech_Greek
Oh yeah! duh :oops: heheheheQuote:
Originally Posted by 9G
Came across this....
http://www.mitsubishi-forums.com/t16735-da...ning-lights.htm
Ok. Here's a pic of the pin you need to bend (or remove) to disable Daytime Running Lights on Galants (and Eclipses). This module (known as the Front ECU Module) is under the hood, inside the fuse box, on the driver side. If you're not sure, look in the manual. Remove the Front ECU, and open it carefully using a flat screwdriver. You can "pop" the white snaps on the black metal part (it's a chip cooler) to completely access the pins, and remove the bottom cover (black plastic). Bend the second last (or 1st) of the SMALL pin connector. Re-assemble, and voila!
P.S. Please be careful. And do not sue me if something happens. You're a grown up, assume the consequences. :P
off topic question to my fellow 9g owners as i just don't want to create a new thread. how long does your 9007 bulb last?