I think you should take the screws out heat it up then pry the clips If you could wait till tonight ill ask my dad to explain it BETTER
Printable View
I think you should take the screws out heat it up then pry the clips If you could wait till tonight ill ask my dad to explain it BETTER
<div class='quotetop'>QUOTE(mattalicslvr8g02)</div><div class='quotemain'>I think you should take the screws out heat it up then pry the clips Â*If you could wait till tonight ill ask my dad to explain it BETTER</div> kool thanks for the tips bro, and thanks for the feedback guyz.... now should i paint them myself http://www.automotivetouchup.com/spray_pai...nt_matched.aspx or get it done. any auto painters in here that can give me a ballpark on how much it would cost for the housing of the tails and the M3's....
<div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'><div class='quotetop'>QUOTE(mattalicslvr8g02)</div><div class='quotemain'>I think you should take the screws out heat it up then pry the clips Â*If you could wait till tonight ill ask my dad to explain it BETTER</div> kool thanks for the tips bro, and thanks for the feedback guyz.... now should i paint them myself http://www.automotivetouchup.com/spray_pai...nt_matched.aspx or get it done. any auto painters in here that can give me a ballpark on how much it would cost for the housing of the tails and the M3's....</div>
and the funny thing is the way with the heat guns the way I suggested to my dad but he says it works his way better.. I emailed him and asked him to respond
<div class='quotetop'>QUOTE(mattalicslvr8g02)</div><div class='quotemain'><div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'><div class='quotetop'>QUOTE(mattalicslvr8g02)</div><div class='quotemain'>I think you should take the screws out heat it up then pry the clips Â*If you could wait till tonight ill ask my dad to explain it BETTER</div> kool thanks for the tips bro, and thanks for the feedback guyz.... now should i paint them myself http://www.automotivetouchup.com/spray_pai...nt_matched.aspx or get it done. any auto painters in here that can give me a ballpark on how much it would cost for the housing of the tails and the M3's....</div>
and the funny thing is the way with the heat guns the way I suggested to my dad but he says it works his way better.. I emailed him and asked him to respond</div> doing it in the oven is risky cause you don't realy have control on to when to take it out and risk the whole light, i thought a heat gun would be best only because i can control where the heat is going... but i'll try both 8) since i always wanted to try the oven method heheh
The F.B.I if I send you a pic of the rear of my dads car can u ps it for me im horrible at it
<div class='quotetop'>QUOTE(mattalicslvr8g02)</div><div class='quotemain'>The F.B.I if I send you a pic of the rear of my dads car can u ps it for me im horrible at it</div> sure i'll give it a try...
Here u go, thanks...
http://img50.imageshack.us/img50/9697/wtdjyq1gz.jpg
this is the best i could do for now gotta get ready for work i'll give in another shot tonight if you want the red to be smoked:
http://www.imagestation.com/picture/...c/ee7babad.jpg
If you're going to leave it like the picture. I say go for it! It gives it a shark look.
on a side note..... do the altezzas have a flat lens, or is it kinda bulged out where the circles are???
<div class='quotetop'>QUOTE(ericbla03)</div><div class='quotemain'>on a side note..... do the altezzas have a flat lens, or is it kinda bulged out where the circles are???</div>
The glass/lense itself does stick out and is molded like the circles...
<div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'>this is the best i could do for now gotta get ready for work i'll give in another shot tonight if you want the red to be smoked:
http://www.imagestation.com/picture/...c/ee7babad.jpg</div>
wow thats good
how can every auto store i go to have not heat guns? anybody wanna send me one hahahha i might just stick this in the oven...
<div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'>how can every auto store i go to have not heat guns? anybody wanna send me one hahahha i might just stick this in the oven...</div>
dog....wal mart...go for around $20...if not...let me know...u could borrow mines...
<div class='quotetop'>QUOTE(o1naturalhigh)</div><div class='quotemain'><div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'>how can every auto store i go to have not heat guns? anybody wanna send me one hahahha i might just stick this in the oven...</div>
dog....wal mart...go for around $20...if not...let me know...u could borrow mines...</div> you don't get a lil pop up when you have a PM huh hahahha i asked you about it in the PM's i sent ya...
GO FOR IT!!!
<div class='quotetop'>QUOTE(ericbla03)</div><div class='quotemain'>on a side note..... do the altezzas have a flat lens, or is it kinda bulged out where the circles are???</div>
i think i know what u r thinking about e.... i was thinking how cool would it be to replace the lens on the altezas with the stock one from 02-03 with a dark tint to it.. and then when it lights up it has the round circle design the altezzas have..
the f.b.i. go for it it looks kinda sharp in my opinion
well guyz thanks to 01natrualhigh and his heat gun i was able to start this project, and it's going go so far i got the lense off with no prob but that black shit was stickyer then a MF hahah i then took the chrome part off then took the red lense off the chrome part to save the hassel of masking everything off i just finished ordering another can of niteshade wich should be here by friday since the shop is only in LA i plan on getting the housing painted when i take it to the shop to get my lip painted shhhhhhhh....... and thanks for all the coments guyz i was prolly gunna drop this project if it wasnt for you thanks... 8) ...
aw fuck jdm..
those look nice..on the first page in the blacked shit
heres an update on the tails... takin em apart is gunna make painting a lot easier 8)
http://www.imagestation.com/picture/...0/ee245d52.jpg
and i had a question for you guyz.....
<span style='color:red'>should i sand the design down so its flat or just leave it and paint it with the design</span> if ya don't know what im talkin about here it is:
http://www.imagestation.com/picture/...3/ee245d4d.jpg
http://www.imagestation.com/picture/...d/ee245d53.jpg