Beautiful work....I think you have very good skills
But why not run the turbo from the exhaust?
You could have finished in one week.
Watch out.
With that much PSI motor will go BANG after a few weeks unless you forge some parts.
Printable View
Beautiful work....I think you have very good skills
But why not run the turbo from the exhaust?
You could have finished in one week.
Watch out.
With that much PSI motor will go BANG after a few weeks unless you forge some parts.
You are doing interesting work, but be ready for a bang.
Intercooling is also needed friend.
Intercooler increases the density of charge, but reduces the boost pressure. It is bad. Therefore intercooler set to turbo, on a supercharger makes no sense. Air temperature is not high. Turbo - be sure to put an intercooler.
blin klassnaya rabota. maladets
Ruslik, thank you. Nice to hear.
У меня есть два наддувом автомобилей, производитель "Sprintex"
Оба они 9G.
Я не хотел бы видеть вас, будут разочарованы
Оба 5,5 секунды в 0-100км / ч
Можете ли вы сделать YouTube ваш для нас слушать?
Very nice work and write up.
How are you tuning the ECU?
Hi all! For a long time I did not write in this topic. There were no free finance. The time has come to continue. Let me remind you all, I made drawings. As had been made gears. I found a sponsor, the project should move. So. The order is placed at the aviation factory. Yesterday I received the first part. This high-speed and low-speed shaft. Here they are. http://s017.radikal.ru/i444/1110/5f/7194300f2876.jpg
For the manufacture of these shafts wrote a computer program for the digital machine. Now you can make thousands of shafts. Low-speed shaft. Made of steel 40H (Russian standard) 5H1400 (american standard). Hardened high-frequency current. Отбалансирован on the 30,000 rpm. http://s017.radikal.ru/i413/1110/93/ad55f926242a.jpg
The shaft of light. Made of steel 5H1400. Hardened high-frequency current. Отбалансирован per 100,000 rpm. http://s017.radikal.ru/i402/1110/f6/eacaa94352a9.jpg
I just wanted to see how it looks in the assembly. Bearings and seals I bought earlier. Low-speed shaft assembly.http://s017.radikal.ru/i441/1110/46/75591c0a7cb4.jpg http://s017.radikal.ru/i402/1110/a2/1ba3b339a7a7.jpg
Impeller will be different. This is for the pictures of what it looks like. http://s003.radikal.ru/i203/1110/0d/6a7663e9701c.jpg
What would you have the correct understanding of kinematics, I made this photo. http://s003.radikal.ru/i202/1110/90/ea8c325cc95b.jpg
The next step. It is necessary to make a cover for the compressor casing. According to my plan. Gearbox is always the same. If you change the cover, impeller and the compressor casing, then I can change the performance of, or establish a supercharger on the engines of another volume. http://s15.radikal.ru/i188/1110/47/34e632378324.jpg http://s017.radikal.ru/i440/1110/39/523bc3dd664b.jpg http://s017.radikal.ru/i434/1110/55/e45b88db86de.jpg
Now you need to make the gear housing. Today made lathe work. Tomorrow I plan to perform milling works. Then will be fulfilled the holes on the coordinate machine. http://s46.radikal.ru/i114/1110/e2/1f1c7e7ff430.jpg http://s003.radikal.ru/i202/1110/b2/f77aba8415a2.jpg http://i052.radikal.ru/1110/ff/166719015d36.jpg Let Me Remind You. All works are carried out at the factory, where they make engines for spacecrafts "Proton" , " Soyuz" , ballistic missiles. Today is all. To be continued...
Today took part. Made milling and cut threads in the holes. That's the way it looks.http://s40.radikal.ru/i090/1110/e4/e4fb64c10054.jpg http://s017.radikal.ru/i433/1110/65/f6636f3aad8a.jpg On the sides (then it will be the top and bottom) are made holes. On top will be the nozzle, the oil under pressure, from the bottom drain line. In the version of chrome, instead of them will be just filler and drain plugs. But according to the calculations, if the compressor power in the oil-highway engine, then his life will be comparable with the resource of the engine. That is to climb into it for the service does not need to be.
Now you need to make holes in the shafts. This is done to coordinate milling machine. It is already in the next week only be able to. And so will look compressor assembly. That's all for now http://s017.radikal.ru/i434/1110/2d/f53ed3ae5a85.jpg http://s55.radikal.ru/i149/1110/64/77b3243ec22e.jpg
When you are done, I will buy for 4g63. Good Work!
I'm thinking also to buy this product. But, I think, price will not be low... :( No wonder - handmade!
Boris, we must wait for serial production. The price will be acceptable.
#brokenenglish
I wish this was mad for an 8g galant 4g64
Initially, I only wanted to install a supercharger. However, in the course of the project, it was found out, that there are very many people who want to install a package. I understood that I can give it to people. Therefore, the project was at a military factory. At this point in the development of 2 variants of the compressor. 1) For engines up to 2.7 liters. 2) For engines up to 5 liters. The options have in the same gear, but the different size of the snail and the impeller. Tonight I will show you the difference between the snails.
Previously I have selected the impeller from the various turbochargers. The project lasts for a year. During this time I was able to contact the manufacturer of turbines, CZ. I made drawings of the impeller. During the month I promised to make the party of the impeller.
We Will Continue. I want to tell about the snail for the variant №2. The turbocharger is selected in size and is calculated according to the formula of air flow. I need this charger. For the first sample I took the used snail from the turbocharger. To use it is necessary to spend tuning. http://s017.radikal.ru/i419/1112/93/4a39898671f4.jpg http://s004.radikal.ru/i208/1112/e2/83264add5b3d.jpg http://s04.radikal.ru/i177/1112/51/e0c83df65c93.jpg
First, increased the center hole of the input. Now it is 3.5" (89.5 mm) For the new impeller. Hole output 2" (50 mm). The entire enclosure is processed by the sand of the jet machine.http://s014.radikal.ru/i329/1112/65/a08fe22f675f.jpg http://s51.radikal.ru/i134/1112/ab/10b49d79787a.jpg http://s017.radikal.ru/i412/1112/80/ebbd3efa45cd.jpg
Here is a picture for comparison. To the left version for engine 2.7 litres. On the right side for 5 liter engine. http://s017.radikal.ru/i410/1112/cf/583be559afa7.jpg
As you can see in the photo, in 5 litre version, there are studs. It is necessary to make the transition to the pipe. I will tell you how it is done. First is worked out the piece of steel. The second part of the standard pipe transition with a diameter of 52 mm to 70 mm. http://s004.radikal.ru/i208/1112/cf/5290dadf9435.jpg http://s49.radikal.ru/i126/1112/20/ca245cc7a70b.jpg http://s017.radikal.ru/i437/1112/f9/98218319962f.jpg
On the reverse side parts made recessing for the rubber ring. Just set the diameter of the holes.http://s017.radikal.ru/i405/1112/a2/c301cd24b18b.jpg http://s44.radikal.ru/i105/1112/dd/c654735ba18f.jpg
according to the set diameter are three holes through the 120 degrees. http://i026.radikal.ru/1112/68/b561a6f041b7.jpg
Next, hold the welding works, using argon. The result was a metallic glass. http://s46.radikal.ru/i112/1112/a3/3a9a60ba094e.jpg http://s017.radikal.ru/i419/1112/17/0b032471bdd6.jpg http://s017.radikal.ru/i431/1112/ed/6a2254de71d0.jpg
A further step, polishing machine. After 30 minutes the glass looks like this. http://s017.radikal.ru/i433/1112/52/0e815bcdb348.jpg http://i073.radikal.ru/1112/8a/caf8d76dce80.jpg http://s48.radikal.ru/i120/1112/49/d8a93d769b9f.jpg
So it will be installed. On this day all. http://s017.radikal.ru/i434/1112/d6/cb9dc1905886.jpg
WOW so pretty
Stas is talented for real!! Good stuff bro!
A small bar to the product. With the help of a laser. http://s13.radikal.ru/i186/1112/73/6027482c6b3b.jpg http://s008.radikal.ru/i305/1112/99/9f54603da052.jpg
Yesterday finished the work on the coordinate machine. These works are performed in assembled form. Housing and cover screws are tightened, after that are made holes. http://s017.radikal.ru/i424/1112/98/9703f420184f.jpg http://s017.radikal.ru/i417/1112/bb/048d4db2ac9e.jpg http://s017.radikal.ru/i419/1112/b3/fb1b5feaeb00.jpg