Then you got Mo' Murda 1st of the month. A couple others I can't remember haha.
I went grocery shopping today.
Printable View
Turned the keys in at the dealer and swapped it for an outlander...:)
Changed my valve cover to an 02 & cleaned up the engine bay a little bit.
Yep, Already have a t3 exhaust manifold, 6g74 connecting rods for the 6g72, garret t3 turbo, 2004 gts ecu, small intercooler, and a greddy bov. I need the tactrix cable, cp pistons, turbo timer, a wastegate, Wideband, and a little knowledge on tuning.
I've been wanting to go turbo since I got the car, I'm hoping by may-june I'll be ready to put everything together.
By the looks of my sig. Should be August 2011 for sure lol
lol well ecuflash tuning isnt to bad when i first started my car ran like crap but after 2months of tuning ive almost got it where i want it still a few problems but ill figure them out XD.
Over the weekend fun like I had posted previously
http://i190.photobucket.com/albums/z...022_214734.jpg
And my home made reducer lol (no one in my small town had a 3in to 2.5in reducer)
http://i190.photobucket.com/albums/z...023_105529.jpg
^^HOLY!!!! what the heck is that!!! (still a newb)
Keith, are you going with a single or twins!?!? I would love to see a USDM TT 8G soon. Before a certain one does it next summer ;)
This is a 36in, 7in round magnaflow muffler. I put it in place of the resonator and It sounds beast.
twins seem like it would be easier but I'm planning on a single. Don't feel like picking up 2 turbo's lol. I'm planning on low boost so.
i was supposed to get 3rd gen tails in today but they havent arrived:(
bought them 2 fridays ago and they were sent on the 18
Put on my winter wheels early since some stupid little punk thought it would be funny to slash my tire.... He's not laughing now.... >:[
embarrassed this guy driving a 09 civic SI
I put my SRI on today :D
pshh with my help from 2000 miles away haha
I drove the thing, and tire rotation
i embarrassed a lot of ppl on the highway today with my 4500 rpm rev limit XD still smoked em. but man after a long highway pull my headers were glowing reeeall bright.
I took out the carpet. Found mad change and nasty stuff :(
http://img222.imageshack.us/img222/2039/photo712.jpg
stuffed it in the trunk and headed out to clean it (1st stg).
http://img842.imageshack.us/img842/9789/photo711v.jpg
also vacuumed the inside and removed some sound deadening cause it cracked trying to look for coins. I washed the car for the first time in like a month or two and bought some stuff to start my next projects.
i moved my car to the other side of the house where the pine needles don't fall.
blacking out all interior cloths . Im going to do the headliner and rear deck in a nice fabric dont know yet but i want a black one. 3g seats hopefully soon already have the steering wheel (un installed).I have courtesy lights waiting to go in some time; idk if i want to put a black light in them or a purple, like my bros e36. thats all for the interior and maybe black seat belts with a tan sleeve.
my current one look dirty so black would be preferred.
i went internet window shopping for the g. I found the rims i want (mainly the style) but Drag Dr-33 17x7.5 +42 mm offset. I couldnt find a similar rim made by a better brand, but from what i heard they are decent for the price.
Bought some "stuff" and started planning the next phase.
found out that 02 and 03 galants that have done the five speed swap, the g runs better, about 600 rpm higher at idle compare to 500 rpm, when you unplug and say screw you to the shift solenoids... also did the valve gasket and plug seals, and b took out the entire clutch system, and bench bled the slave and master, WHOA! shifts way better now....
Bought vavle cover gaskets, spark plug cables, Spark plugs, tranny fluid, tranny pan gasket, oil pan gasket, pcv valve, ignition rotor, tranny filter I think thats it. N finished up my SRI.
http://i828.photobucket.com/albums/z...01026-1718.jpg
cleaned out the garage and driveway in anticipation to the upcoming swap/over haul. then ate icecream to celebrate
received my 3rd gen tails(:
I picked up a whole bunch of groceries in my G today.. :)
and about the bleeding, unless you have brand new EVERYTHING, you probably shouldn't re-route that hose to the reservoir if you're bleeding it for the first time. A lot of gunk is gonna come out of those lines.
Got some headers, my stock ones are solid rust and cracked.
http://i424.photobucket.com/albums/p...008/header.jpg