Yean mine looks the same. I have a matching color headliner piece to replace it but dont have the time yet.
Printable View
Yean mine looks the same. I have a matching color headliner piece to replace it but dont have the time yet.
Lol I know what you mean. Should of been a slower pane
Headliner is out and broken on all sides :(
I need some duct tape, duct tape fixes everything
Headliner and board repaired! Going back in today :D
http://img.tapatalk.com/d/14/07/07/4ysequ3y.jpg
Looks good!
Sent from my Z796C using Tapatalk
Coilovers have been raised to the max. Going to be rolling on bowling ball gap status for awhile
Found the source for my clunking! My rubbers on top and bottom are gone.
Ordered some rubber silencers and spring sleeves to help it out
Silencers came in
http://img.tapatalk.com/d/14/07/17/u4usevum.jpg
Gonna take off the bumper and spoiler tomorrow for paint prep. Hopefully this paint match is good. Headlights are going in as well
One worldspec hooked up, just need to wire in signal light/parking light. Need another harness for the driver side
Bumper and header panel have been primed, should be ready for paint.
Hard part for me is putting everything back together lol.
http://img.tapatalk.com/d/14/07/18/zysyda5y.jpghttp://img.tapatalk.com/d/14/07/18/qena8ape.jpghttp://img.tapatalk.com/d/14/07/18/5y5y6yga.jpghttp://img.tapatalk.com/d/14/07/18/hyba8eqy.jpghttp://img.tapatalk.com/d/14/07/18/yrabe5yt.jpghttp://img.tapatalk.com/d/14/07/18/ehararyg.jpghttp://img.tapatalk.com/d/14/07/18/rasehyde.jpghttp://img.tapatalk.com/d/14/07/18/y7ejy5u8.jpg
Headlights done!
Now painting here I come :(
http://img.tapatalk.com/d/14/07/19/ja5emata.jpg
http://img.tapatalk.com/d/14/07/19/ryty5uru.jpg
Found a 5spd 7g in the j-yard today. I'm kind of tempted to get it.http://img.tapatalk.com/d/14/07/19/nabasuva.jpg
get it!
Agree
Sent from my Z796C using Tapatalk
I would get the parts for the swap but not the actual tranny. Try to get a 2g GST tranny.
... unless the one at the yard is reasonably priced that is.
I have had both the stock 7G 5 speed tranny and now I have the 2G GST tranny. You don't need the longer gears unless you are turbo or can deal with the slightly longer gears. They are basically the same just the gears in the 2g tranny are stronger. Stock 7G tranny took all my abuse being turbo so don't worry lol.
I think I'm just gonna grab the small stuff and what I need. I'll probably go the 2g tranny instead of the one in the j yardQuote:
Originally Posted by Galanttuner10
Paint is done and now I need to wait before clear coat. (I didn't put a flex agent but it's too late now)
http://img.tapatalk.com/d/14/07/19/8yhu7a2y.jpg
http://img.tapatalk.com/d/14/07/19/veveravu.jpg
http://img.tapatalk.com/d/14/07/19/revu6a6y.jpg
I would love longer gears honestly haha. Its annoying to me how much I get "stuck" in between gears with all the weird speed limits in my area, but thats just a personal thing.Quote:
Originally Posted by Galanttuner10
But he is right the stock 7g tranny is tough.
Oh also paint looks good. How well does it match up with your car?
Tbh it's off but I haven't actually got it onto the car. They couldn't find my paint code and my engine Vin was scuffed off. From what it looks like right now. It's like greenish/blueish metallicQuote:
Originally Posted by DEADEYES
Yeah my parts car was that color, probably could have got the code for you :]
I looked at all the paint codes for a 94 green but all I got was a green metallic. When I got the paint sample card it was too dark. So I just paid Sherwin Williams to match it.
I'm clear coating tomorrow morning and probably test fit.
Its G36 for the Everette Green Metallic I believe.
Strange that it was too dark, wonder what your car looks like in person then compared to mine.
My green G is dark as hell where the paint is good.
Either way pics look good
I'm pretty sure the original paint was G36 but this car had been painted four times since we had it lol. Freaking deer and armadillos lolQuote:
Originally Posted by DEADEYES
Ah
Clear coat
Header Panel= Good
Bumper= Has some runs but I'll wet sand it later
http://img.tapatalk.com/d/14/07/21/aga7e5e2.jpghttp://img.tapatalk.com/d/14/07/21/4eta9e7u.jpghttp://img.tapatalk.com/d/14/07/21/unyga5ej.jpghttp://img.tapatalk.com/d/14/07/21/apazajyr.jpghttp://img.tapatalk.com/d/14/07/21/da6uhedu.jpghttp://img.tapatalk.com/d/14/07/21/ha9ygu6y.jpg
This paint cloud needs to leave lol
http://img.tapatalk.com/d/14/07/21/ja2e4aba.jpg
Bumper is back on :D
Fitment is about 90% because the driver side headlights are not flush with the head panel. I also need to fix it up because for some reason the plastic tarp got into it.
http://img.tapatalk.com/d/14/07/27/ga3umevu.jpghttp://img.tapatalk.com/d/14/07/27/ybarurad.jpghttp://img.tapatalk.com/d/14/07/27/ypysy8uq.jpghttp://img.tapatalk.com/d/14/07/27/upevazyt.jpghttp://img.tapatalk.com/d/14/07/27/dedy6y2a.jpghttp://img.tapatalk.com/d/14/07/27/muputura.jpghttp://img.tapatalk.com/d/14/07/27/nazaty4y.jpghttp://img.tapatalk.com/d/14/07/27/zyrasanu.jpg
Now I need to find the damn Mitsubishi emblem lolhttp://img.tapatalk.com/d/14/07/27/abezute7.jpg
Ran out of paint for the spoiler :(
http://img.tapatalk.com/d/14/07/28/ynurapyp.jpghttp://img.tapatalk.com/d/14/07/28/egy7ume8.jpg
Fitment is only perfect with the JDM bumpers so don't worry too much. Coming along nicely.
Sherwin gave me free paint to fix the error of the paint match :D
Now more painting! Woot woot!
http://img.tapatalk.com/d/14/07/29/adyqejej.jpg
Gst part out
Might pick up that tranny and parts for 5lug/disc conversion
http://img.tapatalk.com/d/14/07/29/tuguqazu.jpg
Going to try out this integra lip
http://img.tapatalk.com/d/14/08/02/7yhaquva.jpghttp://img.tapatalk.com/d/14/08/02/6unyhu8e.jpghttp://img.tapatalk.com/d/14/08/02/8agyba6a.jpg
Also should there be a bolt here? I didn't notice this until I got under the car the other day.http://img.tapatalk.com/d/14/08/02/duzu4ahy.jpg
I cant comment on the bolt, but that lip... I'd like to see it on the car!
Sent from my Z796C using Tapatalk
Should be on this weekend after I repaint the bumper :DQuote:
Originally Posted by 2002BlackDragon
Boo! Lol
Sent from my Z796C using Tapatalk
Can't tell where you are in the picture well enough
Looks like tranny side to me, but yeah need a better picture.
Your 7g folding mirror should arrive Monday. On the gap under the mirror try adding "home depot lip" material underneath to cover the gap.
Sweet, I've been looking at tracking periodically. As for the gap, I'm not understanding so well. I'll take a look at them when I get them to understand
Quote:
Originally Posted by Galanttuner10
Yes, this is the side where the trans is. Sorry for not explaining lol.Quote:
Originally Posted by DEADEYES