are those yellow or green?Quote:
Originally Posted by boosting90
Printable View
are those yellow or green?Quote:
Originally Posted by boosting90
I don't have spacers, I'll get a pic down the side mondayQuote:
Originally Posted by SNWFLK
from my wheel box:
https://farm4.staticflickr.com/3837/...06f86349_z.jpg
Alright please do, and tire size. I would like to get my ideal size if tires and everything down before I purchase. I'd like to be flush and semi slammed with a slight raise in the rear.
So I finally got tires, ended up getting hankook ventus v12 evo2. Didn't realize how beefy these tires were. Slapped them on and fronts work, sit flush, rubs a little on full lock at the top of the fender, but I'll just raise the front a couple of turns on the coils. As for the rears, different story, I'm semi rolled in the back but I'm rubbing when I get onto uneven pavement, raised it 4 turns on the coils and went full stiffness, still runs slightly, so last resort imma roll the fenders flat and pull the fender a tiny bit and I should clear no problem. Car looks different now, kindve wierd tbh. Oh and brembos won't fit, so dual pistons it is
http://i730.photobucket.com/albums/w...psuizgokev.jpg
http://i730.photobucket.com/albums/w...psy1nvkllk.jpg
http://i730.photobucket.com/albums/w...pswtynxrbm.jpg
http://i730.photobucket.com/albums/w...psd1njmj8c.jpg
Fuuuuuuhhh
Looks very clean
Not usually a fan of that rim style but that looks sweet
Sent from my iPhone using Tapatalk
They are weird. So weird, you should send them to me!!!
J/K they look dope as hell!
lovin em!
Killer choice, im lovng it
Sent from my LG-LS970 using Tapatalk
not quite today, my EVO X fuel pump showed up yesterday
Boss status, wheels look good
https://farm4.staticflickr.com/3921/...4559e678_b.jpgQuote:
Originally Posted by SNWFLK
https://farm6.staticflickr.com/5551/...e68d0cb1_b.jpg
https://farm6.staticflickr.com/5577/...f17328bf_b.jpg
I was rubbing in the rear when someone rides back there so I rolled the rear fenders
Thx guys! Still working on the fenders, haven't had much time, I'll probably end up having a pro massage them out.
Snwflk, my works were 18x8 +45 and I didn't have any issues with those, dont even have to roll your rear fenders and I'm dropped 3+ inches. I ran 225/40. You can work from there to get an idea, maybe a +40 to get a lil more aggressive.
http://i730.photobucket.com/albums/w...psa5bac166.jpg
225/40 looks good and maybe my 17x7 +40 choice won't look so bad. Thanks guys.
Yeah tire choice helps too, I've noticed falkens, potenzas, continental aren't too beefy, Bfg,hankook, Michelin seem to have beefy sidewalls so a 225 might look bigger on some brandsQuote:
Originally Posted by SNWFLK
Yeah I seem to form different opinions on different style of wheels because some look tiny, some look wider, and it results usually in tire. What you have pictured there looks like what I'm going for. I see your reppin that simply clean tho. Thumbs up!Quote:
Originally Posted by dronesurfboards
I had some enkei en358's that I ran 215/35/18 on and could scrape the frame before rubbing sidewall :) the fronts would hit the little plastic guards inside the wheel well but that's it
Sent from my iPhone using Tapatalk
the are leds with 2 layers of yellow tint.Quote:
Originally Posted by demond0d5
Well got my rear visor equipped with some new tape...this stuff http://galleryplus.ebayimg.com/ws/we.../1000x1000.jpg
Sorry for the large pic, but its copied from ebay.
Anyway, would chance it and install since its sunny, but the forecast claims rain later smh. Whole week has been like that here, it never rains when expected but when you least expect it.
Also got 3m 94 primer pens on ebay for better adhesion. Tape ran me like $6 and some change at walmart, and one roll was enough
Wheres the pics of the install? We like to see pics! Lol
Sent from my Z796C using Tapatalk
I just put my visor back on also, it's like an annual thing to change the tape now. Almost lost it earlier this year when the winds were going crazy a few months ago.
No install yet due to it possibly raining all this week except thurs. Hopefully then. And Drone hopefully I can get more than a year, cause it was a pain to remove it last time with original tape lolQuote:
Originally Posted by 2002BlackDragon
http://img.tapatalk.com/d/14/06/26/sypu7ybu.jpg
Installed hid kit!
Ok today was a good day of installs:
Step 1: JBL 6x9s in the rear and JBL 6.5s in the front
[IMG]http://i1266.photobucket.com/albums/...psf0a0bd97.jpg[/IMG]
Step 2: Tanabe upper strut bar
[IMG]http://i1266.photobucket.com/albums/...ps8e0128da.jpg[/IMG]
Step 3: Weapon R short ram intake
[IMG]
http://i1266.photobucket.com/albums/...ps6bcf9056.jpg[/IMG]
Sounds good and looks good:
[IMG]http://i1266.photobucket.com/albums/...ps3bc55445.jpg[/IMG]
Tonight I will be plastic dipping the front grille because painting didn't work!
did you sand it up before painting? otherwise no, the paint wont stick to the surface and will just "wipe" off
I sanded the whole surface, if the plastic dip doesn't work it will be going to the body shop for a professional sanding and painting (Tuesday, $75.00).
Ok, so the third coated just finish drying. The grille is on the car and it looks sick. I will post a picture in the morning so everyone can see. I am debating about painting the badge and the original chrome strip red.
How does it sound when dat MIVEC kick in?Quote:
Originally Posted by Armycoug
I fired her up after, I still need to take her out for a spin. I was waiting for the grille to be done.
I've gotten so I'd rather dip than paint when a matte finish is needed. Seems like no matter how careful I am with paint, 8 times out of 10 its a screw up. But dip hasn't failed me yet.
how are the speakers sounding? i was considering getting some for my 8GQuote:
Originally Posted by Armycoug
I don't know about these exact speakers but a friend of mine has some jbl's and they are ok...nothing fantastic and as long as you don't go super loud they are decent. No audio competition grade stuff but ok if you're just looking for noise lol
I've got a full mb quart system (4) tweeters, (2) 6.5" (in rear deck), (2) 6.5" in front doors, and (2) 4" kick well speakers with crossovers all around that do damn well (if you have subs for the bass) and I would def recommend them.
Polk also has some pretty good stuff for fairly cheap. I'd go Fosgate all the way if you want top notch (but then again I am a huge Fosgate fan) :023:
Sent from my iPhone using Tapatalk
These speakers are awesome, my neighbors hate me now. I got them on Ebay, saved a bunch because best buy and Amazon wanted a lot more.Quote:
Originally Posted by Celph Concepts
It sounds good, it doesn't sound all riced out. It does increase the get up and go.Quote:
Originally Posted by Black8GV6
^nice
My front tires were looking low, checked them and only had 25psi, filled them up. Checked rears even though they looked fine, they were also 25psi, filled them up too.
Had to deal with this mess of shit to try and hang my clutch pedal...still ain't done yet
http://img.tapatalk.com/d/14/06/27/gajusuha.jpg
And what is this thing? Little wire cable that mounts up with the brake pedal...the pedal I got didn't have it so I just cut mine down instead
http://img.tapatalk.com/d/14/06/27/nuza7azu.jpg
Sent from my iPhone using Tapatalk
Thats your "Press brake to shift out of park" lockout cable. Not needed anymore its trash now.
Also that's perhaps the unsafest firewall access I've ever seen. Did you poke through with a rock and chisel?
You need to drill through that with a big ass unibit immediately, majore short waiting to happen with that power cable going through.
Sent From My Rooted Galaxy Note 2 using Tapatalk
That is a shit load of wires coming in.
^was about to say the same thing but you beat me to it. He should of used one main power wire in and used distribution block.