http://tapatalk.imageshack.com/v2/15...7af30a4aba.jpg
Springs and struts came in the mail
Printable View
http://tapatalk.imageshack.com/v2/15...7af30a4aba.jpg
Springs and struts came in the mail
That front end looks mesmerizing..
Post some pictures with them springs and struts on, Yo!
Ok imma try to put on this weekend
Just got an openport 2.0 from hristo so I can start logging/understanding what I'm gonna be working with when I go boosted...and may even be able to work some stuff over for the N/A setup
Sent from my iPhone using Tapatalk
Just got the exhaust back from being electro polished.... http://tapatalk.imageshack.com/v2/15...b3f5cff137.jpg
Sent from S-G4
Got the rear 17's back on with some 215/45 tires...about a finger of clearance now so I'm happy with that
Last night the guys an I went out having some fun...racing around the lake and some back roads in a "track" we made up...lots of fun I tell ya what! But after all was said and done I wanted to see just where I stacked up in our group after the new mods...last I cred was still with the auto. Lined up with a civic EF (old light weight boxy thing) with a few mods here and there...neither of us get traction and spun all the way through 1st, neck n neck in 2nd, started to pull on him in 3rd, and when we hit 4th I pulled away from him...he claimed to miss shift so we lined up again and when I went into 3rd all hell broke loose. The bushings holding my shift tower down got pulled through so my entire tower was loose.
How it's supposed to be:
http://tapatalk.imageshack.com/v2/15...7c014eecf0.jpg
How it was:
http://tapatalk.imageshack.com/v2/15...7a4b5c04cd.jpg
To fix it I just went to the hardware store and got some fender washers. Put them on the bushings so that they can't get pulled through again...
Sent from my iPhone using Tapatalk
I have aluminum shifter base bushings and brass shifter cable bushings on the transmission side, no slack baby
[IMG]http://i1371.photobucket.com/albums/...pshqfatvo9.jpg[/IMG] Finally got my Jdm tail lights <3
[IMG]http://i1250.photobucket.com/albums/...ps19riitxd.jpg[/IMG]
Got some H1 Mini for my birthday yesterday, guess I better get busy. Wish me luck.
happy late b day coco
Thanks Palmz
I'm in love with the coco xD
how much are you guys paying for shiping when u buy tail or/and headlights from Asia or Europe?
Any where from 30$ to 80$
does anybody remember how much they wight aprox? just so i dont have to rip mine out just to check
The tails?
yeah or heads
Just weighed thatfreshkids taillights and the are 3lbs each..
ok thanks
All together it'll prob be 10 for box and stuff
yeahb
[IMG]http://i1250.photobucket.com/albums/...psjce6cabv.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...pscasvjrxv.jpg[/IMG]
All done but think it might be wrong. Kit the wife and THATFRESHKID got is mini h1 6.0. What do you all think, can this kit be used? Thanks in advance.
It's the right kit "yells in head , shut up ! "
I used the minis and loved them. To this day I wanna gey my retrofit setup back together.Quote:
Originally Posted by coconut
I chose to black out everything for that sleek look.
http://i1199.photobucket.com/albums/...7-28-42_95.jpg
Light output video on 5000k 55w from DDM (in middle lane of I-10)
http://s1199.photobucket.com/user/vi...9_700.mp4.html
Dang, wrong harness for my retrofit.. smh..
Post what you got I'll help you make it work.
They (meaning wife and kid) ordered the 9006 so I have no hi beam, im needing the h4/9003.Talk to Carlos at the retrofit source and he set me up with the correct one and all I have to do is send him the incorrect one and we good. You have a way to make this one work?
[IMG]http://i1250.photobucket.com/albums/...ps19riitxd.jpg[/IMG]
If you need detail wiring I would have to take some pictures when I get home tonight
You should not run 50/55W bulbs in the Mini H1 - you will burn your projector bowls.
Besides, you have enough room to fit the slightly bigger, slightly more expensive, but vastly better Mini D2S projectors and get some serious lighting performance.
I built a set for ShizNith using these projectors, and he's very impressed with the performance.
I also built a quad bixenon set for another friend using JDM style Depo projectors as a base. I did the build with the Mini D2S and EvoX-R bixenon projectors, all from TRS, and the combined output of these is just staggering. He's running Philips 85122 35W D2S bulbs with Fast Bright F3 (35W) ballasts.
If im not mistaking i do believe they 35w bulb with the 35w ballast. Have to double check.
If you got the whole kit, then you will have 35W bulbs and 35W ballasts.
My previous post was for the complete, retrofitted headlights a bit further up.
When I did my reaserch, all I came across was Mini H1> MiniD2S.Quote:
Originally Posted by csjoh
Comments like "Mini D2S=shoddy attempt at true D2S projectors."
Nevet burned a bowl on 55w but the added heat did cause a few stuck plungers in the solenoid coil.
Yea bro I would have to see the harness ends. If your set on exchanging them by all means, just know that harnesses are all the same collection of wires and relays, they just put your stock connector at the tip for simplification. But if you dont have a probelm with a little cutting and sodering it'll work.Quote:
Originally Posted by coconut
Before the Mini D2S 3.0 came out, that was true. The MD2S 2.0 was not a good projector. It had tragic low beam but a fairly decent highbeam, but v3.0 is based on a design that actually works (the Q5/Q5-R projector, which in turn is based off of Hella G3, which is a very good projector).Quote:
Originally Posted by oakrdrs187
Give it a try if you have the chance, it's near OEM performance in terms of width, reach and highbeam. It will however benefit from a moderate foreground limiter.
If you're using the OEM H4 plug, you need the MotoControl H4/9003 harness.Quote:
Originally Posted by oakrdrs187
I dont mind modifying the harness i have. The issue im having is no high beam.. No matter what wires I cross or connectors I change still no high beam. So that's when it dawned on me that the harness with the realy is not allow the motor to flip the thingy( lol) in the projector to work properly. Just a guess though..Quote:
Originally Posted by oakrdrs187
^ I THINK he's right..Quote:
Originally Posted by csjoh
Here is the harness
[IMG]http://i1250.photobucket.com/albums/...psunperyum.jpg[/IMG]
[IMG]http://i1250.photobucket.com/albums/...psrx339v5w.jpg[/IMG]
Connect the solenoid wires driectly to thestock high beam and ground wires.
So if I connect the oem connector to my high beam and ground thar should work? I think I tried that but will do it again.