lol I like them. Here's all the info! They are pretty cheap too
Printable View
lol I like them. Here's all the info! They are pretty cheap too
It warmed up enough to get my new 15" JBLs in. Sounds fantastic.
http://i1167.photobucket.com/albums/...psycvaijai.jpg
http://i1167.photobucket.com/albums/...psfuq4fogh.jpg
Box was too tall to fit with the subs facing the trunk lid, so I had to put them on their back.
How do you like those ? Coconut has
2 12in dual over voice coil subs that bang
Stick to 12's...they have a better range and sound just as good.
Sent from my iPhone using Tapatalk
I had 3 12's but I need a little room in my trunk so I decided to get 2 15's instead, so far I am very pleased with them but I will have to wait to see how they hold up. And yes, demon, 12's do have a much better range but I have never had 15's before and wanted to give them a try.
Techno, you can fit thay box, you have to go in at angle, maybe remove the weather stripping (then re-install it).
I fit 2 12inch W6s in a HUGE ported box once.
When I closed the trunk the metal bars that hang down from the trunk just caught on the box and prevented the trunk from closing, is there a way around that?
I see. I put mine in with the subs firing towards the backseat, the box was all the way back up against the trunk lid
Ohh now I understand, I use my trunk quite a bit otherwise I would have just done that too
Why two 15's or three 12's....is one 8 or 10 not enough?
I used to love subs. Couldn't have too much bass for the girls. But now i try to save my ear drums and shed a little weight ��
Anyways, I got some replica SVR4 lips (front/rear) and I'm ordering a jdm rear finally. Can't wait
I've always had a fascination with subwoofers, couldn't tell you why. I like feeling the music almost as much as I do hearing it lol.
Most of it is probably because I'm a teenager.
When it comes to ridiculous bass, causing a nuisance, and turning heads, it's a lot like lowering a car, too much is not enough.Quote:
Originally Posted by Blue8g
I guess there are those who like lows (Hz) and those who like lows (in.)
Allow me to reintroduce myself!!
Lol na but I'm digging the drop tho
http://tapatalk.imageshack.com/v2/15...4df43421a6.jpg
Call me old, but I've reached the point where I could really care less about my car audio setup as long as I can play audio from my phone. After a set of ok'ish speakers, it's all good.
If I want to crank it up, I'll go fire up the stereo system in my downstairs family room and let my Bose 601's rip.
As long as my podcasts are clear, I couldn't care much less about my car's stereo.Quote:
Originally Posted by M-Rod
Very very nice, LOVING THE UMMMM, DRROOOP!!!(beasty boys voice) :-)Quote:
Originally Posted by juicejax
I have absolutely no idea how they work or if it would solve the problem butQuote:
Originally Posted by Techn0Nut1996
what about those trunk hinges that flip the trunk straight up instead of pivoting? not sure what they are called but ive seen a few of them...may be worth looking into
A flip flop trunk? I thought of that as well but didn't want to spend the money on it
My question is how the hell have you managed to keep that board that covers the spare straight? mine is all concave and I hate it.
Mine was the same when I bought it a couple years ago. I took it out then laid it on a piece of 3/4 inch plywood and traced the outside edge to get the shape, then used a jigsaw to cut it to the right shape, then glued the old carpet on top of the new plywood. Good as new. It sticks up about a quarter of an inch but it's hard to tell when you are just looking at it.
I wish the stock infiniti speakers were built stronger for higher volume. I had friends trying to convince me to get a set of subs to match the amp (aftermarket) that came with my car, but it seemed pointless. I've always been more into mid and highs.
Also Techn0Nut1996 theres always these too if your just splicing and not tapping http://m.youtube.com/watch?v=iO6SRGyQdMw I used em once with a lighter. Just keep flame going back forth and not too close all around.
And last but not least, jax the drop looks real good, and djaltamira thanks for my new phone wallpaper lol
Box sits outside the spare well.Quote:
Originally Posted by dronesurfboards
One solution I found, get another stock board and position it underneath yours upside down. It helps alot.
Another I used to do it is by getting a full size spare steelie, with 195/65/15 tire. Both can be found at the local yard.
fun fact the cover in the jdm's is full trunk size so it doesnt bend as easily and it a bit thickerQuote:
Originally Posted by oakrdrs187
Thanks but the reference went clear over my head... I'm a lil young for the beastie boys...know any lil wayne?? LMAOQuote:
Originally Posted by coconut
Cause I picked the world up and Imma drop it on your fuckin head? lolQuote:
Originally Posted by juicejax
Really does look clean tho man, is it a dark green or a black?
Why is JDM better in every way :(Quote:
Originally Posted by Palmz
Sent from my iPhone using Tapatalk
That is a nice drop!! Looks great :023:Quote:
Originally Posted by juicejax
I promised that's first quote that came to my head when I mentioned wayne...but thanks and it's blackQuote:
Originally Posted by Techn0Nut1996
ThanksQuote:
Originally Posted by Kros702
Looks clean! I love dark colors!Quote:
Originally Posted by juicejax
http://s15.postimg.org/rbeqnnk97/photo_1.jpg
for my 9g but I got some RRE Headers,
Should I have these coated or wrapped or anything??
Isaurio has a thread about wrapping headers. He explains some stuff with his 8g and why he chose to wrap. Try googling your question...you will find more info than you'd ever want
First thing to think about it need. Is your engine bay temps really that hot? Are you boosted (I'm guessing not) so they aren't going to be that hot. (Headers will up the temps though iirc)
If you decide it's too hot then what can you afford? Ceramic coating is really good but expensive. $300 for a $400 set of headers...not worth it to most people (prices are purely guessed) wrap is considerably cheaper.
Next is longevity. Modifying them voids any and all warranty chances. Wrap could cause rust unless you do it right. Etc
Next is looks. Which do you like more; how they are now, coated look, painted look, wrapped look, etc.
Personally I ceramic painted, wrapped, and re-painted mine:
http://tapatalk.imageshack.com/v2/15...f310e7e94e.jpg
Sent from my iPhone using Tapatalk
Picked these up from the body shop today[IMG]http://i1250.photobucket.com/albums/...psd8wvsdoq.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...psphrx5uh6.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...psm76t1xnp.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...psyb6rgfiw.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...ps4mpo7ecc.jpg[/IMG]
Had them paint the radio bezel to match the shift bezel..
Do you always run at that psi?
Sent from my iPhone using Tapatalk
Looks great!
Quote:
Originally Posted by coconut
I'm Lovin' It @ #mickeyd's
Yes usually 50psi rear 60psi frontQuote:
Originally Posted by demond0d5
Oh is that tank on the right? Surprised the hell out of me I see 170psi on a bag gauge!!!
Sent from my iPhone using Tapatalk
Funny you mentioned that. I came in the house and went directly to thatfreshkids room and sang that damn song " PARAPAPAPAAA, Im loving it". LMFAO!!!!Quote:
Originally Posted by oakrdrs187