Originally Posted by
Gtorque
Okay having alittle trouble here and need some help. John came by and did a flash with speed density,Omni 4 map,and Immobilizer delete. The car doesnt wanna start. He said everything seems to be right with the ecu wiring and everything but no luck. The battery is in the trunk so i got some shorter + & - wires to hook it up under the hood to see if this was the problem but no luck again. The battery was fully charged but the motor seemed to be cranking alittle bit but still way to slow.Today I took off the starter and replaced it with a new one. I went to start it and it was cranking much better/faster but still doesnt want to turn on. Also the AEM oil pressure gauge says --- when starting if that means anything. The motor just turns and shows no interest in starting. The plugs that were changed were the 2 Ignition plugs from the evo harness that has 3 wires each and the injector plugs. The TPS was re wired correctly for the evo.Also did a evo 8 ecu swap. I think that maybe the 2 Ignition plugs might be wired wrong. Im not sure that this is correct but if the 2 plugs are not wired up right that would mean that the car wouldnt be getting any spark what so ever from anywhere causing the car not to start? Cause wouldnt this be just like the plugs werent even plugged in if there wired up wrong? Idk Does anybody have any ideas or any information that may help me at all? I would greatly appreciate it