Hey Guys New Pics Of Whats Coming Up...Some new pics

ok just a little update.

finally got all the parts ready to send the head to the machine shop. should have it back sometime next week. here is a list of the parts i have so far

-Weisco Pistons
-Eagle Rods
-ARP Main bolts
-ARP Head bolts
-HKS 272 intake and exhaust cams
-Brian Crower Titanium Valve Springs
-Brian Crower Stainless steel intake and exhaust valves
-ACL race main and rod bearings
-Gates Performance Timing and balance shaft belts(blue)
-Fidanza cam gears (red)
-AEM Hi-flow fuel rail
-RC 1000cc injectors
-Zaklee clear upper timing cover
-Felpro head gasket set
-Felpro conversion(lower) set
-New OEM water pump
-New OEM Oil pump
-New OEM timing tensioner and idler pulleys
-New OEM sensors. Cam, crank, coolant temp, temp sensor, others look in good shape.

MAYBE getting or need to get
-Skunk 2 68mm throttle body
-Skunk 2 intake manifold
-cosmetic or HKS head gasket
-Performance radiator..not sure on who yet


anyways here are a few more pics of the parts as they come in.. waiting for UPS to bring ACL main and rod bearings, hopefully coming in this week so i can start building the bottom end.

BC intake and exhaust valves
http://i19.photobucket.com/albums/b1...s/074d9fbf.jpg

AEM hi-flow fuel rail
http://i19.photobucket.com/albums/b1...s/85aaf1d0.jpg

RC 1000cc injectors
http://i19.photobucket.com/albums/b1...s/420620dd.jpg

Zaklee clear upper timing cover
http://i19.photobucket.com/albums/b1...s/2dffb9f0.jpg

stay tuned as the build is just a few weeks ahead...


on the other side i made the eclipse look a little better in my opinion. wont be doing any type of modification to this car, as i want to keep it as a daily driver.

http://i19.photobucket.com/albums/b1...s/9fd7ccb2.jpg

http://i19.photobucket.com/albums/b1...s/5ecbb480.jpg

http://i19.photobucket.com/albums/b1...s/86fbebdd.jpg

http://i19.photobucket.com/albums/b1...s/8b2950ad.jpg

is the felpro gasket MLS???

Good job. Lots of parts.

Quote:

---

Originally Posted by Stewi

is the felpro gasket MLS???

---

yes the head gasket is MLS, i might end up using it, since the hks head gaskets run close to $200.

Currently the best headgaskets available for the EVO motor are the OEM MLS gasket and the MLS gasket from PowerEnterprise. Make sure you let the machine shop know your using a MLS headgasket so they can deck the surfaces on a CBN mill to achieve the proper R/A rating. You cant deck them on a regular machine like you would a motor using a normal headgasket.

Your Eclipse is perfect!

What is your compression on the pistons? and if it was me I would use cosmetic gaskets...they are pretty good. As for cooling get a Mishimoto radiator for an Evo 8, all you have to do is re-mount the radiator mounts or make your own which is what I did.

Quote:

---

Originally Posted by Galantfan88

What is your compression on the pistons? and if it was me I would use cosmetic gaskets...they are pretty good. As for cooling get a Mishimoto radiator for an Evo 8, all you have to do is re-mount the radiator mounts or make your own which is what I did.

---

Cometics EVO headgaskets have proven to be the worst option as of late. I know, I think about it alot since I have a cometic headgasket on my engine. When I did the headswap it was the only gasket available for the DOHC conversion, recently AMS started mod'ing stock MLS gaskets to work and Power Enterprise started making them too. The NEW style cometic gaskets are good, but they are also $250, at that point you can buy a Power Enterprise one for the same price.

Quote:

---

Originally Posted by Galantfan88

What is your compression on the pistons? and if it was me I would use cosmetic gaskets...they are pretty good. As for cooling get a Mishimoto radiator for an Evo 8, all you have to do is re-mount the radiator mounts or make your own which is what I did.

---

stock compression on the pistons.. i know hks makes thicker gaskets to raise compression but thats something ill look into as i get there.

as for the radiator i was actually looking into one of those.

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

or this one

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

head is currently in the machine shop getting a valve job and all the works with new valves, springs/retainers, valve locks. should have it back sometime this week if not next week.

just got quoted $500-600 to do the short block, which includes installation of all new internals, honing of the cylinder walls, balancing of the crank which is crucial, and other stuff. in the coming weeks ill be taking the block to get done and after that hopefully start putting the engine back together.

Thanks not bad. Great

Lookin great!!!!!!

Clean galant and eclipse...gotta be nice to cruise around in either in the miami scenery. Never been to either but miami and japan just seem so cool.

well finally got the head back from the machine shop...waiting for the bottom end to get finished to start putting it back together.

http://i19.photobucket.com/albums/b1...s/0d4d357a.jpg
http://i19.photobucket.com/albums/b1...s/1901e87a.jpg
http://i19.photobucket.com/albums/b1...s/c4f98c17.jpg
http://i19.photobucket.com/albums/b1...s/3af3869a.jpg

nice^ very nice.... are you going 2.0? or 2.4?

Quote:

---

Originally Posted by Galantman03

nice^ very nice.... are you going 2.0? or 2.4?

---

2.0

What type of turbo are you going with. You dont think the injector a little big? You will need to rescale them down. By the way nice clean evo head.

Quote:

---

Originally Posted by Isaurio

What type of turbo are you going with. You dont think the injector a little big? You will need to rescale them down. By the way nice clean evo head.

---

not quite sure yet...for the first few months im gonna be running the stock evo 9 that i have now, pump up the boost and see what i can get out of it..my goals are 400+...i see many evo guys getting that power with the stock turbo...so we'll see...i have been looking into a gt35r...but thats another story...the injectors will flow more than enough fuel for any type of set-up i decide to throw on there..might have to scale them down but its ok, i know if i ever want more the fuel system wont be a problem

Get an fp stock replacrment Turbo or a crbd bbkb

Quote:

---

Originally Posted by greddy

Get an fp stock replacrment Turbo or a crbd bbkb

---

ive been looking into the FP red or black...aiming more towards the red...when the time comes ill see what i decide on.