me and my dad have the Exedy clutch kit it's not to badQuote:
Originally Posted by rezyy0
Printable View
me and my dad have the Exedy clutch kit it's not to badQuote:
Originally Posted by rezyy0
@rezyy0Exact person I got mine from. Had to change the input bearing but it was easy to do..
Told you, I will help when you get everything together. L m k
Should I check to see if it should be replaced?Quote:
Originally Posted by coconut
He told me straight up what was wrong with it. Did he mention anything to you if there was something wrong with it? If not hit him up and ask just to be safe.
So a lot happened today
http://i1371.photobucket.com/albums/...pshv2totcv.jpg
http://i1371.photobucket.com/albums/...psgwsu5qtk.jpg
http://i1371.photobucket.com/albums/...psprf5qfxk.jpg
http://i1371.photobucket.com/albums/...psfulhpzro.jpg
http://i1371.photobucket.com/albums/...ps3yh4dnqh.jpg
http://i1371.photobucket.com/albums/...pshxmpz1t6.png
http://i1371.photobucket.com/albums/...psspjylqw8.png
Not done yet but tomorrow we will be [emoji7] [emoji1]
Who makes this kit?? I've never heard of it.Quote:
Originally Posted by rezyy0
Exedy does, lemme find a link.Quote:
Originally Posted by spdracr
This link should go to the page. If not, searching mbk1000 on Exedy's website will bring it up.
http://www.exedyusa.com/oe/Clutch_Specifications
Is it more of a performance clutch?Quote:
Originally Posted by rezyy0
No, it's an oem type clutch. All I got is a oem flywheel so no performance clutch or anything for me. Yet anyways.Quote:
Originally Posted by Thatfresh_kid
Are you replacing or doing a trans swap ? I have a couple questions ...Quote:
Originally Posted by rezyy0
Haven't done the swap yet.Quote:
Originally Posted by Thatfresh_kid
Are you going to rub cruise control?Quote:
Originally Posted by rezyy0
I don't know about cruise control. I don't really use it. Like at all, so it doesn't really matter if it's there or not. But that's just me personally.Quote:
Originally Posted by Thatfresh_kid
I was gonna ask if you knew how to run the wires because me and my dad forgot how we did hisQuote:
Originally Posted by rezyy0
http://images.tapatalk-cdn.com/15/06...2414634f3b.jpg
Spare engine to start my build. (50$ [emoji14] )
Sent from my SM-G386T using Tapatalk
Just texted your dad to start thinking about it. I've had ideas but I'm not 100% sure. Iirc there is a thread somewhere about it but idkQuote:
Originally Posted by Thatfresh_kid
Sent from my iPhone using Tapatalk
I think I found itQuote:
Originally Posted by demond0d5
http://i1371.photobucket.com/albums/...pspq5rc3k1.png
http://i1371.photobucket.com/albums/...psfxprdpsp.png
http://i1371.photobucket.com/albums/...pskaadwfhd.png
Bought some tools, thought i should break em in
http://i1193.photobucket.com/albums/...4555998765.jpg
Some maintenance stuff before the big road trip
http://i1193.photobucket.com/albums/...3809601941.jpg
Then i decided i had some black paint.
http://i1193.photobucket.com/albums/...5870672362.jpg
clean my Lug Nuts and put in clear coat
http://i1193.photobucket.com/albums/...3453349620.jpgæ
Also i got two new tyres and a new spare wheel a big normal size one not this retarded shit that comes with the car.
Good night :)
Threw on my new headlight switch from rock auto, hopefully to cure my signals not responding time to time when activated. Way easier of a install than I expected.
Also threw in new air freshener, that was the hardest part lol.
Installed my new id1000cc injectors today.
http://images.tapatalk-cdn.com/15/06...0ce5e6682d.jpg
Got my front lip on [emoji108]
http://i1371.photobucket.com/albums/...pslor2vegp.jpg
http://i1371.photobucket.com/albums/...psgmikir7y.jpg
Car came together nicely KiD.
I know you're trying to play by California Rules, but It needs less front plate.
He is already bringing plenty of attention as is with the way the car is being that you don't see these cars fixed up and all he need more attention(popo). Ya know!? Lol... And he's only 16..Quote:
Originally Posted by oakrdrs187
- - - Updated - - -
He is already brining plenty of attention as is with the way the car is being that you don't see these cars fixed up and all he need more attention(popo). Ya know!? Lol... And he's only 16..Quote:
Originally Posted by oakrdrs187
^^Only reason its still on the car im sure
Looks really nice!! Well done. I need to get me some coilovers and then a lip!Quote:
Originally Posted by Thatfresh_kid
Ya I wanted to take it off but my pops said I might get pulled over for itQuote:
Originally Posted by oakrdrs187
Stepdad and I went to the dmv today. Transferred the title to me so the G is officially mine!
I'm not quite there yet .[emoji24] [emoji24] [emoji23] but congrats [emoji106]Quote:
Originally Posted by rezyy0
Dad of the year right hereQuote:
Originally Posted by coconut
Yes sir.Quote:
Originally Posted by oakrdrs187
- - - Updated - - -
Haha. ThanksQuote:
Originally Posted by JDyal
- - - Updated - - -
CongratsQuote:
Originally Posted by rezyy0
Thanks! It was already "mine", but it was for insurance reasons. His monthly bill was gonna double with me on it [emoji44] . So got my own insurance and the G [emoji16].Quote:
Originally Posted by coconut
PrettyQuote:
Originally Posted by Trotty
Sent from my SM-G386T using Tapatalk
As shined up as your car is I figured you'd have brembos too (assuming legnums can do the swap) but those are some spiffy lookin rotors :pQuote:
Originally Posted by Trotty
Sent from my iPhone using Tapatalk
I have brembos lined up. Yes they swap onto my leggy as I have the fl model. I do to know if I can put up with the squeal from them. Already these rotors feel a lot better on initial bite. And far more progressive and better pedal feel.
Those are some nice looking rotors you got there.
Couple minor things. Took care of the fogs
http://i26.photobucket.com/albums/c1...701_052242.jpg
I liked what Zequel did with his door sills, so I did mine too. I thought about doing them in a color, but I think the chrome is a cleaner look... for now.
http://i26.photobucket.com/albums/c1...701_052227.jpg
http://i26.photobucket.com/albums/c1...701_052203.jpg
Looks good! I kind of want to do mine as well.Quote:
Originally Posted by Spartan251
Super easy. I used 3m molding tape, and have no clearance issues with my door.Quote:
Originally Posted by Techn0Nut1996
[IMG]http://i1250.photobucket.com/albums/...pspi0irmmf.jpg[/IMG][IMG]http://i1250.photobucket.com/albums/...psxe3gokl8.jpg[/IMG]
In line for the paint booth.
Hope she gets done on time for M O D..