[IMG]http://i1250.photobucket.com/albums/...psdbvyehiv.jpg[/IMG]
This is the picky part of me when I want something done right and" ALMOST"factory look.
got these from kylecanthurdle today. Thanks you sir.
Printable View
[IMG]http://i1250.photobucket.com/albums/...psdbvyehiv.jpg[/IMG]
This is the picky part of me when I want something done right and" ALMOST"factory look.
got these from kylecanthurdle today. Thanks you sir.
Fist pic didn't work. What are these for anyway??Quote:
Originally Posted by coconut
Pigtails for city lights.
Correct city light pigtails.
My G didn't came with the OEM floor mat when my sister gave it to me, so I've never experienced a perfect fit floor mat, you know those aftermarket ones, you'll have to adjust it like every other day...
So, after waiting for responses from www.mitsubishipartswarehouse.com for weeks, I've finally received my OEM floor mats!! too bad the snowy season is probably coming soon, so the plastic aftermarket will still sit on top of the OEM for now.
Don't know if I've mention it before, but the strut bar from 3g eclipse was really an easy mod, I've bought the bar itself for like $30 from ebay, but that guy didn't included the mounts... so to make it quick, I got some new ones from my closest Mit. dealer, which is in Sandy Utah (Do you guys know there's not any Mit. dealers in the state of Idaho?), borrowed some tools from Autozone and installed it right there.
Weeks later I got my DDM HID 6000k hi/low kit, and installed it, really a night and day different. Speaking of which, have any of you ever seen the light color turning slightly green gradually? I think it started from turning blue-ish at first, then maybe 2 or 3 weeks later it get more green-ish, but only one side. So I've called DDM and they're sending me a replacement, from China again...
All this post with no pics??Quote:
Originally Posted by yhkwok
you're right spdracr, there's a say in Hong Kong forum culture - no picture no truth,
sorry about that :P
here is my pic of the HIDs, will get the strut bar and floor mat pictures taken soon :)
http://i646.photobucket.com/albums/u...107_204441.jpg
http://i646.photobucket.com/albums/u...107_204434.jpg
Received MAF sensor today from ebay. Just finished the install and car is no longer on the fritz.
Been busy working too much to give the car some love or attention. But I picked up two sets of wheels for next year this past week. After I clean them a bit and send them off for minor repairs though. A sneak peek at things to come I suppose? First set are some Sparco Assetto Gara's 17x7.5 et43. Not sure if I like them yet but it was a good deal in case the brake swap doesn't fit my Riken wheels (They seemed to but I will confirm it when my brackets come in). And the second set is now my personal favorite, and up my alley in the classic old school wheels category. Genuine 3 piece Work Rezax, 16x7.5 et43 in the front and 16x8 et50 in the rear, manufactured in 1993.
http://i79.photobucket.com/albums/j1...pspbybpvcu.jpg
http://i79.photobucket.com/albums/j1...pslxghndct.jpg
http://i79.photobucket.com/albums/j1...psestilvfy.jpg
http://i79.photobucket.com/albums/j1...psulflj8bt.jpg
http://i79.photobucket.com/albums/j1...psho0qui4b.jpg
^ Both of those look great. I like the oldskoolness of the WORK wheels, but LOVE the sparcos. What brake setup do they need to clear?
Thanks man! I'm warming up to the Sparcos haha, and I am running the 1992 3000GT VR-4 brakes all around. Fits in the bolt location but need to run a small spacer for my Rikens. Fabbed a bracket for larger rotors going to see if that's any better.Quote:
Originally Posted by gtx
Purchased this badboy...
http://images.tapatalk-cdn.com/15/11...64646903fd.jpg
Sent from my SM-G386T using Tapatalk
Pulled my engine from the donor car
http://images.tapatalk-cdn.com/15/11...c144c37926.jpg
Sent from my SM-G925T using Tapatalk
I found this and will go in after I clean up it a bit
https://farm1.staticflickr.com/669/2...d5a00b37_c.jpg
Trimmed the lower opening on my bumper a little bit and added the same mesh I used in my grille
http://i26.photobucket.com/albums/c1...214_161849.jpg
Need something like that for my 7g, looks good.
Sent from my SM-N920P using Tapatalk
https://vimeo.com/149589112https://vimeo.com/149589154http://images.tapatalk-cdn.com/15/12...487e5c665e.jpg
Studs broke and the damn wheel came off. Don't buy forged aluminum lug nuts lol. Blessed to only be going like 15 mph she's back as good as new and it didn't cost too much of anything. Just some new studs and a fender.
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...3836e0e30f.jpg
Sent from my SM-G925T using Tapatalk
http://i33.photobucket.com/albums/d6...psmkrjyfpo.jpg
5 speed swap finished today!
Video of the sound..Quote:
Originally Posted by amaru7
- - - Updated - - -
Your gonna love the difference man.Quote:
Originally Posted by kylecanthurdle
if only the flywheel wasnt warped. i did the swap on my first galant a while back, loved it. obviously i had to do it again!Quote:
Originally Posted by coconut
Time for a 2g lightweight flywheel then!Quote:
Originally Posted by kylecanthurdle
Sent from my SM-G925T using Tapatalk
if i recall, i need to get a flywheel PLUS a starter. this is prety much a budget build so i dont wanna spend more money on a flywheel than i did on the entire swap lol. just picked up one from greddy plus some spare brembos for the race car.Quote:
Originally Posted by amaru7
I think you need a new starter or shim the current one. How'd you get a trans for the swap that cheap? Why do you think the flywheel is warped?Quote:
Originally Posted by kylecanthurdle
Sent from my SM-G925T using Tapatalk
Never mind. Just found your threadQuote:
Originally Posted by kylecanthurdle
Sent from my SM-G925T using Tapatalk
Color matched gas lid
http://images.tapatalk-cdn.com/15/12...b0e37aa948.jpg
Sent from my iPhone using Tapatalk
very nice, i need to get me something to lower mine as well. what strut/shock did you go with?
Awsome!! Looking good.
S-techs and GR -2'sQuote:
Originally Posted by kylecanthurdle
Sent from my SM-G925T using Tapatalk
Headers came 3 days early!!!!!!! Now if i can just find my tools lol
Pulling a bunch of stuff off my G, anyone want/need anything? The car needs to be driveble so no main components. Fog light housings are pretty much brand new, I just installed them. Keyless entry key fob is also fore sale.
^^^do you have the those lil splash guards that are at the bottom of all 4 wheel wells?
These?Quote:
Originally Posted by xd_01
http://i1167.photobucket.com/albums/...pspaww5qrl.jpg
If so, yes, all 4, PM if interested.
Housings for a jdm bumper?Quote:
Originally Posted by Techn0Nut1996
Nope sorry, exterior was almost completely US 8gb standardQuote:
Originally Posted by kylecanthurdle
Projector heads?
(my brother in law, I'm against them remember... Lol!)