:lol: hey, do what'cha gotta do :wink:Quote:
Originally Posted by mtcavity1
as long as it works... :D
Printable View
:lol: hey, do what'cha gotta do :wink:Quote:
Originally Posted by mtcavity1
as long as it works... :D
UPDATE: received the EGT gauge a few days ago.
http://i165.photobucket.com/albums/u...cs/00002-1.jpg
http://i165.photobucket.com/albums/u...cs/00001-1.jpg
the adapters (for the injectors) and the tapped oil pan are currently being shipped to my house. should be there (both) by thursday. after that, i'll be getting the IC piping (Brandon: sorry i'm taking so long to give you the payment, exams this week. i should be able to send it to you by friday)
no need to apologize man i'll hold it for you dont worry
what else do you need to finish you setup?
Glad to see my EGT made it to a good home.
thank you for holding it for me! :DQuote:
Originally Posted by underated
i think the only things i need is the IC piping (w/maft), gaskets, a custom downpipe, fuel pressure regulator (still pondering on whether to stay stock, or aeromotive, or EVO fuel rail & fpr), oil lines, vacuum lines (i guess to route the BOV, FPR, wastegate, etc.. to the vacuum manifold).
Gaskets: block ->manifold
manifold -> turbo
turbo -> o2 housing
o2 housing -> downpipe
downpipe -> midpipe
not sure if i still need an oil cooler, i think i do though i have to figure out how to route the tapped oil pan to the oil cooler.
that's all i can think of for now.
don't know what this is, but i heard that i might need a "dump tube" as well (i don't know what this is :?
UPDATE: btw, the adapters just came in today....
http://i165.photobucket.com/albums/u...cs/00003-1.jpg
http://i165.photobucket.com/albums/u...cs/00001-2.jpg
http://i165.photobucket.com/albums/u...cs/00002-2.jpg
depending on my schedule, i might get the injectors installed next week, we'll see. but yeah, those are the last few parts that i can think for now. the parts from the first page are already bought (at least the ones that came with the kit) if i'm forgetting anything, please do remind me, lol. thanks all
more to come soon.... :wink:
yes, and i do thank you for the gauge!! :smt023Quote:
Originally Posted by Stewi
it will be put to good use
you dont need a tump tube since your using an internal wastegate with the stock o2 housing
the oil cooler is seperate from the oil pan
you would use the oil filter housing for inlet and outlet ports to hook the oil cooler to
the fitting on the oil pan is just to drain the turbo the oil goes from the feed line through the turbo out the drain line into the pan
i opted to get the transmission cooler over the oil cooler because if you use good enough oil and change it regularly it wont break down or overheat but the trans mission on the other hand you want as much protection for it as possible the cooler inside the radiator just isn't going to cut it long term but thats just how i thought about things
k, not really an update til i show the pics, but i just purchased underrated's IC piping on friday (gonna pst those pics when it comes in the mail). In the meantime, i was browsing around the turbo section for more info..the usual. I saw the link that seth98est put up for someone looking for a turbo list for their setup.
http://4g64.150m.com/turbo3.html
So i read it for a while and noticed that you can install the S-AFC as one of the "pre-mods" for the turbo, like how i have the fuel pump in now....before the actual turbo's on. (sorry, TOTAL noob moment :oops: :lol: ). anyways...i think that might be another install i do, right before the injectors go in, just gotta figure out how to install the S-AFC with the injectors, we shall see...
This thread is pushing me more and more towards tinkering with my engine and going turbo... sounds fun! Turbo + 20" rims??!!?!... lol
LOL 20" and turbo......... :lol:Quote:
Originally Posted by Divinity
lol, i'm glad my thread is inspiring you to go turbo. :D :wink:Quote:
Originally Posted by Divinity
Drew i dropped the piping, gm maf/translator and sandwich adapter off tonight it will be shipped in the morning... its comming in a hp printer box lol i'm about to pm you with the tracking number
the maf translator is zero'd out (you can use it to tune) i just had it setup as a meter like the stock unit
the piping has a flange for your 1g BOV it places it down by the driver side fog light looks like this
http://img138.imageshack.us/img138/1...0507uq3.th.jpg
i cant wait to see your car turbo'd
awesome!!! just got the PM too :D i can't wait too, it's gonna be sweeeet!!!Quote:
Originally Posted by underated
Are you planning to be FI by the end of the year Drew?
yup. it's gonna be my christmas/bday present to myselfQuote:
Originally Posted by SkylineG1
that's as long as i can get all the parts before the end of November, then i'll wait until after finals to do the install
UPDATE: gee, i didn't order a printer :smt017
http://i165.photobucket.com/albums/u...ping/00001.jpg
i wonder what's inside.....
http://i165.photobucket.com/albums/u...ping/00002.jpg
awesome....my intercooler piping is in!!!
http://i165.photobucket.com/albums/u...ping/00005.jpg
and so is my adapter...
http://i165.photobucket.com/albums/u...ping/00003.jpg
http://i165.photobucket.com/albums/u...ping/00004.jpg
http://i165.photobucket.com/albums/u...ping/00006.jpg
http://i165.photobucket.com/albums/u...ping/00007.jpg
i guess this is where the BOV can go...
http://i165.photobucket.com/albums/u...ping/00008.jpg
http://i165.photobucket.com/albums/u...ping/00009.jpg
http://i165.photobucket.com/albums/u...ping/00010.jpg
and the maft...
http://i165.photobucket.com/albums/u...ping/00011.jpg
http://i165.photobucket.com/albums/u...ping/00012.jpg
http://i165.photobucket.com/albums/u...ping/00014.jpg
http://i165.photobucket.com/albums/u...ping/00015.jpg
http://i165.photobucket.com/albums/u...ping/00017.jpg
http://i165.photobucket.com/albums/u...ping/00013.jpg
and the oil pan i got from a member in club3g...
http://i165.photobucket.com/albums/u...ping/00018.jpg
http://i165.photobucket.com/albums/u...ping/00019.jpg
not too fond of the tap, but it's in there, so really no complaints here...
http://i165.photobucket.com/albums/u...ping/00020.jpg
http://i165.photobucket.com/albums/u...ping/00021.jpg
http://i165.photobucket.com/albums/u...ping/00022.jpg
http://i165.photobucket.com/albums/u...ping/00023.jpg
big thanks to underated for the IC piping, maft and adapter :D
i have the S-AFC, injectors, and adapters on me currently, so i'm looking at a few forums and websites on how to install the S-AFC with the new injectors in... that might be sometime right before or after thanksgiving break...
more to come later :wink:
Eeeek. Wouln't use that pan, I'd be worried about the hose slipping off that "fitting". Id just pull your pan, tap it or weld a real barb fitting to it.
that's what i'm thinkin about doing... i'm a lil iffy about that tap and wanted to get opinions on it. i'm gonna see if i can find another stock oil pan and save it while i tap my current one.Quote:
Originally Posted by seth98esT
Nice!
Except for the oil pan. I could tap your pan if you want (wow that sounds kind-a gay).
Here is my pan after a slutty "tapping". :lol:
(there was a ring gasket and nut for the inner threads not in the pic)
http://i188.photobucket.com/albums/z...y/HPIM1235.jpg
http://i188.photobucket.com/albums/z...y/HPIM1234.jpg
mtcavity1's pan looks like a great job i would be worried about the other pan ripping a hole in your return line after awhile the edges look a little ruff
wow mtcavity, that looks way better. yeah, that'd be great if you could tap my oil pan (:smt011 :lol:)Quote:
Originally Posted by mtcavity1
i'll see if i can get the ring gaskets and the nut for the inner threads to do my current pan. Do you know when you might be available?, i wanna see if i can get the S-AFC and the injectors in the car..