Originally Posted by
Isaurio
I think you set a flag on the knock sum. Let say you dont want a knock above 3 or 4 put a flag on that number and evoscan will beep or will give you a color pattern. I have to play with it since i dont have a knock sensor. LOL.....Beam. Good news. Put a GTZ fuel map low and high. and as timing put the GTS timing. that will be your base map. and then fine tune it.
I notice and is a fact. That when you go bigger intake, CAI, short ram, 5 speed, etc. You need to change to a lower timing advance map. since the engine is receiving more air and it rotates more freely without the A/T torque converter etc. The timing advance needs to be lower and fuel needs to be just right. Ones you gain power with a lower timing advance them you fine tuned "increase timing and adjust fuel/AFR" it until you get knock. The stock map wont do any good ones you do the upgrades that i mention since they are set to a higher timing advance for the a/t. That is way the eclipse 5 speed have a lower timing map than the a/t cars.