I grinded the centers a little, Glued right near the cneter....pulled the needles out a little and i was good to go
Printable View
I grinded the centers a little, Glued right near the cneter....pulled the needles out a little and i was good to go
ok heres what i did.. i dunno how long it'll stick for but we'll have to see... i took the new gauges and put scotch tape on the back arounnd the hole for hte needle.. i then took some scotch tape and did the same on the old gauges except on the front side instead of the back.. then i took crazy glue and put it all over the tape and put the two together. I did this so i wouldnt ruin the old gauges just in case i want to take the indiglos out someday. but if you dont want to do this all you gotta do is put some krazy glue more towards the middle cus the old gauges are sort of curved so the middle has to be glued down to the old one so that the needle can move freely
wow looks great thanks for the help https://www.thegalantcenter.org/styl...lt/biggrin.gif ... hey by the way i noticed as i was driving at night that the lights for the ac/heater knob, fan speed knob and the other were not lighted up... did this have anything to do with the green and black wires that i cut???
u cut them??
all you needed to do was tap into the power not cut it
ya u werent supposed to cut them bro............try re-tapping them back into the wires
okay thanks i just fixed it right now