MKO's AWD/Turbo/DOHC/5 Speed Project

Quote:

---

Originally Posted by w/oarctic7g

How exactly did you convert the alternator?

---

The OBD2 alternator has 4 wires - red, white, green and blue and the OBD1 alternator has two wires - red and white. I capped off the green and blue and the red goes to red and white to white.

Quote:

---

Originally Posted by oakrdrs187

What do you end up doing about the drive-line being short?

---

Installed the spare 4g63 engine I have.

http://i1006.photobucket.com/albums/...p/HPIM1559.jpg

Eclipsh suggested that I cut the drive shaft in the middle, so there it goes

http://i1006.photobucket.com/albums/...p/HPIM1558.jpg

I used some exhaust pipes and t-bolt clamps to get the shaft to its correct length. I'll be taking it to the drive shaft shop this coming week

http://i1006.photobucket.com/albums/...p/HPIM1560.jpg

http://i1006.photobucket.com/albums/...p/HPIM1566.jpg

Full drive shaft installed.

http://i1006.photobucket.com/albums/...p/HPIM1561.jpg

http://i1006.photobucket.com/albums/...p/HPIM1562.jpg


This is the piece that can be fit in the Galant's tunnel. I had to fab up a housing for it to make it beefier.

from this

http://i1006.photobucket.com/albums/...p/HPIM1550.jpg

to this

http://i1006.photobucket.com/albums/...p/HPIM1565.jpg

http://i1006.photobucket.com/albums/...p/HPIM1564.jpg

http://i1006.photobucket.com/albums/...p/HPIM1563.jpg

Filling the gaps

http://i1006.photobucket.com/albums/...p/HPIM1567.jpg


Carrier bearing tacked in its place.

http://i1006.photobucket.com/albums/...p/HPIM1568.jpg

Nice progress. Did you allow for some in/out play at the transfer case? The drive shaft shop wanted the yoke something like 3/4" away from completely seating down in the t-case.

From what ive read, i understand that the carriers do that for the drive shaft. Especially the rear one and it has that cone shape to move in and out.

You're correct BTW. Thanks for mentioning it.

Since I like where the carrier sits and Its already tacked in place, Im gonna have to tell the shop to shorten the front piece of the drive shaft 3/4''

Glad I could help :)

Nice work MKO !!!!
Is it possible for you to measure your driveshaft from T-CASE to Diff ?

I just got my finishing pieces to drop my motor in and will be tackling this next.

Also did you eliminate a carrier bearing? from the pics it looks like there is only one located towards the rear of the car?

Look at the last two pages - its all about the carriers and the driveshaft

Been sick for a couple of days and havent been at the garage.

I did the roll stoppers with liquid urethane and its not the Windo weld urethane or any home depot roofing urethane, but the very same that the motor mount inserts are made of.

I had the partial insert in the rear one and full race welded front one which actually was kind of harsh.

http://i1006.photobucket.com/albums/...p/HPIM1571.jpg

http://i1006.photobucket.com/albums/...p/HPIM1570.jpg

http://i1006.photobucket.com/albums/...p/HPIM1569.jpg

If anyone cares, this is what I used:

http://www.energysuspensionparts.com...&PARTNER=gbase

Everything is coming off tomorrow and I'll be coating the undercarriage.

Just a quick few pictures of all brackets, bolts, nuts and washers being coated.

http://i1006.photobucket.com/albums/...4/HPIM1575.jpg

http://i1006.photobucket.com/albums/...4/HPIM1573.jpg

http://i1006.photobucket.com/albums/...4/HPIM1574.jpg

http://i1006.photobucket.com/albums/...4/HPIM1572.jpg

For all 7g and 8g owners - there's a factory upgrade for the rear trailing arms from 2g Diamante. The pipe of the control arm is probably twice as big as any other 7g or 8g trailing arm.

I'll have pictures soon.

Hell yea! Glad you're out there finding things that'll work on our cars, first the Intrepid end links and now this!

Quote:

---

Originally Posted by mko

For all 7g and 8g owners - there's a factory upgrade for the rear trailing arms from 2g Diamante. The pipe of the control arm is probably twice as big as any other 7g or 8g trailing arm.

I'll have pictures soon.

---

you mean the thing that most of us snap at some point?

I am going to print this entire thread and eclipsh's and all the tutorials

Make me a 7G textbook

I respect y'all cars and y'all as creators

Keep it up

Quote:

---

Originally Posted by mko

For all 7g and 8g owners - there's a factory upgrade for the rear trailing arms from 2g Diamante. The pipe of the control arm is probably twice as big as any other 7g or 8g trailing arm.

I'll have pictures soon.

---

More info on this plz:orangeshy::orangeshy:

The 2G Diamante suspension is pretty much the basics for the 8G suspension...actually the frame is more like the basics for the 8G, just reduce in size, as the 2G was release in 1997 while the 8G in 1999. Just beefier parts because the Diamante is consider a full size sedan.

The two little rust spots on each side of the rear fender well (pics are a couple of pages back) turned out to be 1/3 of the rocker panel rust spots. It pretty much took me the whole day to clean that up. I had a nice little pile of rust debris from both sides.

Now I need sheet metal and start welding it back together.

Got me an Evo 8 rear hub, so thats been taken care of. I just removed both rear brake lines, so tomorrow I'll have to run and bend the new lines. After that the rear end is to be put together, so I can drop the front subframe and work on that. Unfortunately, there are no polyurethane bushings for the front subframe (only solid aluminum and they are pricey), so I might just use that stock ones.

Good work bro. Keep it up.

Nice work.. Quick question for ya.. I found a 97 sonata in the JY and removed the mdp Sensor/bracket. I remember you pointing out that this sensor could be used when running a 1g Eclipse intake manifold. was wondering where you attached this sensor too and if it works without any cell?

wherever you want bro. You can extend the harness ans have it on the firewall, or tuck in under the intake manifold....you know what i mean...

Yep Iam attaching it to the manifold via bracket, but don't know what boost/vacum source Iam going to tap. Was wondering if I could tap it into the same source fort the boost guage.