Yes, one goes between the pcv valve and the IM and the other one o the valve cover breather to the intake, the one on the pcv valve closes while on boost so you don't pressurize the crankcase, http://www.stealth316.com/2-krankvents.htm
Printable View
Yes, one goes between the pcv valve and the IM and the other one o the valve cover breather to the intake, the one on the pcv valve closes while on boost so you don't pressurize the crankcase, http://www.stealth316.com/2-krankvents.htm
Boostin!! big thanks to marc and isaurio argel for all ur help!!! i got u guys!!
http://i1323.photobucket.com/albums/...pseb9238b8.mp4
Almost done ;)
http://i195.photobucket.com/albums/z...ps28d12c0a.jpg
I like it
Came out good with no visual imperfections. Paint mesh black or keep it the way it is now?
http://i27.photobucket.com/albums/c1...CAM00764-1.jpg
flat black...chop or paint the middle bar on the bumper too
http://i111.photobucket.com/albums/n...E/galant25.jpg
Changed both o2 sensors
Might cut and mesh that too.
First need bondo for when i chop chop
Thanks ;)
Not the 8g but I moved my Clarion over to my Maxima from my 8g, looking to get a flipout for the 8g. Brainstorming about what to do with the top screen in the Maxima now, because the top 2/3 of it was the radio display now it is blank. I have seen a few people put a 7 inch tablet up there, might be a good idea.
Before
http://i16.photobucket.com/albums/b2...ps247ace85.jpg
After
http://i16.photobucket.com/albums/b2...psdfc9ff26.jpg
http://i1188.photobucket.com/albums/...229D86A25E.jpg
http://i1188.photobucket.com/albums/...22A10683DF.jpg
http://i1188.photobucket.com/albums/...22A51B7292.jpg
Stickerbomb and rapid dry 2k aerosol clear coat
Hold up, are those indivdual stickers or a wrap? And then clear on top? Nice job either way. Also Njjfudge, I like the Clarion in the maxima..makes it look futuristic kinda lol
^^^ its a wrap made to look like individual stickers.
Sent From My Rooted Galaxy Note 2 using Tapatalk
I bought a 09 Honda Ruckus today
Nioce I am going to start buliding one here soon
Probably do a bored out GET, focus on motor work first to get that thing up to speed, drag bars, fatty in the rear, custom strech, lowered seat frame and disc brakes. should set me right. Also lower the bike and maybe a rigid front end
working on putting on the body kit!!!!
http://i634.photobucket.com/albums/u.../galant003.jpg
[IMG]http://i634.photobucket.com/albums/u.../galant004.jpg[/IMG]
but the side skirts are going to be a bitch because the doors have to come off to put them on....
The rear I can dig, I just cant get used to that front.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Installing my Mugen Lip. I was surprised i barely had to do anything to the lip, all i did was trim the mount in the middle to fit the bumper then i was able to attach it. Here's a pic, no screws yet( don't mind the plastic over the passenger headlight, i was clear coating my passenger fender but just got lazy to take it off after hahah)
http://farm8.staticflickr.com/7415/9...21dd3864_c.jpg