Printable View
the dye is called idye and idye poly that were mixed 50/50. I picked a few colors and made my own color, but they do have red. If you do red, do not keep the carpet for more than 15-30 min, cuz it gets way to dark......dont ask how i know
here's a little update.
http://i1006.photobucket.com/albums/...p/IMG_7464.jpg
Another step closer to finish it.
Head is torqued down and I dropped off the oil pan to have a 12AN fitting welded to it. It should be soon ready to install it. I still need front brake hard lines. I got them form the junkyard, but it seems like i misplaced them. IDK what the freak happened to them.
http://i1006.photobucket.com/albums/...p/HPIM1652.jpg
http://i1006.photobucket.com/albums/...p/HPIM1655.jpg
http://i1006.photobucket.com/albums/...p/HPIM1653.jpg
http://i1006.photobucket.com/albums/...p/HPIM1654.jpg
http://i1006.photobucket.com/albums/...p/HPIM1656.jpg
Big THANKS to Spdracr for doing all the powder coating for me.........I still have a bit more left, Alex.....:)
The interior is starting to look neat I guess.
http://i1006.photobucket.com/albums/...p/HPIM1660.jpg
http://i1006.photobucket.com/albums/...p/HPIM1659.jpg
http://i1006.photobucket.com/albums/...p/HPIM1658.jpg
http://i1006.photobucket.com/albums/...p/HPIM1657.jpg
I believe I found out why my drive shaft wouldnt line up. You can see the way the rear carrier bearing, between the middle and rear pieces, keeps both pieces lined up making them act as one solid and not allowing any flex.
http://i1006.photobucket.com/albums/...p/HPIM1617.jpg
And here are a couple of pics of the same section actually flexing. I'd guess it was an error by the driveshop when they assembled it.
http://i1125.photobucket.com/albums/...B99760986E.jpg
http://i1118.photobucket.com/albums/...0107A5ADFD.jpg
Looks good! Cruel Summer material!!
Getting closer every day. I plan on dropping the motor in a week and honestly i cant wait. I still have to the front brake lines and the lines from master cyl to prop valve.
http://i1006.photobucket.com/albums/...ps56aec8f0.jpg
Nothing new inside.
http://i1006.photobucket.com/albums/...psee23fb58.jpg
http://i1006.photobucket.com/albums/...psaeb90bc7.jpg
Worked on the front end today and installed the wheels i got for free.
http://i1006.photobucket.com/albums/...pse384bfd1.jpg
http://i1006.photobucket.com/albums/...ps8631af2e.jpg
http://i1006.photobucket.com/albums/...ps36e3adfd.jpg
Working in the snow, oh my! In for updates, loving the interior!
That interior is looking awesome!
Holy crap those parts look awesome installed on the engine!! Motor mount needs to be done too!!
Looking good nice to see awd swaps coming about. Hope it looks good as the red on when it done.
http://i1006.photobucket.com/albums/...ps1725da7d.jpg
Oh is that another AWD coming soon....oh crap!!!??
Dear lord look at that rust
Haha nice, MKO I couldn't go through this swap again. I was wondering what you had in store for your exhaust setup, I've fabbed one up to be able to get to a shop but haven't found one yet willing to do the work without the cat :( ...
Hey man, i have it all for the exhaust just waiting to have the engine and trans in to start fitting, cutting and welding.
Its full 3'' with a cat, one 30'' glasspack and a muffler. They are all different brand tho.
Quick update: There's a car on jackstands in the garage so i cant put mine in. Im ready to drop the engine in, hopefully sometime next week I'll have it done.
http://i1006.photobucket.com/albums/...ps1d6a3c49.jpg
http://i1006.photobucket.com/albums/...ps5095d3ba.jpg
http://i1006.photobucket.com/albums/...ps0517fbae.jpg
http://i1006.photobucket.com/albums/...psbddedabb.jpg
Big Thanks to Spdracr for doing his magic again.
I really like your interior that came out really nice and clean!
Purple flows good with the red.
Damn that's vicious!
I noticed you didn't put a new hydraulic tensioner on it,how come?You might not want to let it go to long with that that one before you change it.