Originally Posted by
ericbla03
one of the hardest things about doing a retrofit is getting the projector alligned properly. Since projectors have such a sharp cutoff it is easily noticable if it is not mounted level. Its pretty tricky. The adjustment screws on the back will only allow you to move the cutoff up, down, and a little bit side to side ... there is no rotational adjustment.
So my suggestion to you (if you have not already done this) is to mount the headlight in the car and shine it against a wall at night. If the cutoff is not straight, you may have a major headache ahead, since the projectors are already permanently mounted in the housing. :(