did they do any valve angle job or just replaced them? and how much did the wokr cost you ?
Printable View
did they do any valve angle job or just replaced them? and how much did the wokr cost you ?
5 angle valve job and after some parts that i was missing where ordered it coast 330 bux to have it machined and assembled i have over 1g in the head alone lol
I jizzed in my pants.
Very nice man, I like it a lot. keep up with the good work.
Ill be focusing on exterior this summer - 2 tone paint job, new rims, hopefully some JDM goodies. i guess you need to do that too. I see your interior is nice
yea i got to finish the front seats still and i want new carpet
Are you getting one custom molded? I dont think there are any aftermarket carpets for 7g. BTW I dyed mine black
i can find a replacement one, or ill just do my own lol.
Rice
im going to kill you
:smt050
I love the flat black..
Is it more silent now? Im looking to add some middle resonators and change my end muffler cuz its very loud w/o silencer.
its quieter just put it up there to get everything lined up so i can take it to work and weld it tonight. its a little raspy on the down swing but it was leaking some at that flange and out of the extension pipe i put in
has a much better sound then the one that was on there though much much better.
http://i188.photobucket.com/albums/z...d/DSCN6981.jpg
http://i188.photobucket.com/albums/z...d/DSCN6982.jpg
http://i188.photobucket.com/albums/z...d/DSCN6983.jpg
finished and my god it sounds so much better and so much quieter. I love my welds too.
I feel so nostalgic when I see my headlights ending up on your car hahahaha.
why do you still not have a sway bar?!
lol i no i needs one.
damn dude. That 8g spoiler came out nicely. Did it fight you? Or did my method work out pretty good?
your method worked out really good thanks. It leaks a little bit but i have a solution for that lol. i got some gasket material from work that im going to put on each bolt that should make it stop leaking. Thanks for the help on that one turned out really good.
Yea ive never sealed it. Im going to use a ton of caulking if i decide to keep this wing.. Im still undecided if i want to keep the spoiler and the kit... Im getting tired of the look. I found some tenzo rims that i realllllllllyyyyy want and i think the kit will have to go to set them off... Anyways good luck man.
Thanks TJ and i picked out my turbo yesterday so im going to buy it next week.
please do share.Quote:
Originally Posted by Galant306m
i'm starting off with my big 16G and will take it from there when i feel like breaking stuff
Finished the drivers side seat last night and put it in today. Got to go the passenger side tonight after work lol and put it in, in the morning.
http://i188.photobucket.com/albums/z...m/DSCN6986.jpg
http://i188.photobucket.com/albums/z...m/DSCN6987.jpg
http://i188.photobucket.com/albums/z...m/DSCN6988.jpg
Damn, looks comfy
nice covers! did you made them?
Nah i bought a katskinz kit off of ebay for like 140 bux back in December and im just getting time to finish them up now its a pain in the ass to do but i think i can get the other side done tonight shouldn't take me to long.
engine is ready to come out! will have her pulled by tomorrow, and on a engine stand ready for the tare down. Pics will be uploaded later.
sick!!!!!!! lol
http://i188.photobucket.com/albums/z...d/DSCN7080.jpg
http://i188.photobucket.com/albums/z...d/DSCN7081.jpg
http://i188.photobucket.com/albums/z...d/DSCN7083.jpg
http://i188.photobucket.com/albums/z...d/DSCN7087.jpg
http://i188.photobucket.com/albums/z...d/DSCN7088.jpg
http://i188.photobucket.com/albums/z...d/DSCN7090.jpg
http://i188.photobucket.com/albums/z...d/DSCN7091.jpg
http://i188.photobucket.com/albums/z...d/DSCN7092.jpg
http://i188.photobucket.com/albums/z...d/DSCN7093.jpg
http://i188.photobucket.com/albums/z...d/DSCN7094.jpg
http://i188.photobucket.com/albums/z...d/DSCN7095.jpg
http://i188.photobucket.com/albums/z...d/DSCN7096.jpg
you didn't take the exhaust off of the car?
nope
hit me up this weekend for some help bro
i got a wedding to go to this saturday but i will be pulling it apart on sunday if you want to help you are more then welcome.
ive been doing alot of reading and i mean alot of reading about this swap, going to pull the 64 apart on sunday and have it sent out to be cleaned and bored. Dont know how much of a bore yet be i will figure that out later.
This build is going to be a blast but its very stress full. keep posted this will become alot of fun trust me.
(turbo is bigger then a 20g) thats my teaser
I think someone told me if you get it bored .30 over it will be a "2.5". Idk how much machine work is in your area but i got my 63 bored .20, decked, hot tanked, new freeze plugs and micro polished the crank an i paid 220 bucks. Looks like youve got alot of work done man. take note as far as wiring and send the shits to me yo! BTW thanks for that link man. hopefully within the next month i shall have me some new goodies!
You know ill be there.Quote:
Originally Posted by Galant306m
engine apart new fmic 30x12x3 ah thats better. lol
http://i188.photobucket.com/albums/z...m/DSCN7098.jpg
http://i188.photobucket.com/albums/z...m/DSCN7099.jpg
http://i188.photobucket.com/albums/z...m/DSCN7100.jpg
http://i188.photobucket.com/albums/z...m/DSCN7103.jpg
http://i188.photobucket.com/albums/z...m/DSCN7104.jpg
http://i188.photobucket.com/albums/z...m/DSCN7109.jpg
http://i188.photobucket.com/albums/z...m/DSCN7110.jpg
http://i188.photobucket.com/albums/z...6-29141433.jpg
http://i188.photobucket.com/albums/z...6-28181356.jpg
picked up my 5spd mounted my intercooler.