I hear ya man. Those still look great
Sent from my Z796C using Tapatalk
Printable View
I hear ya man. Those still look great
Sent from my Z796C using Tapatalk
What paint did you use?Quote:
Originally Posted by CHICAGO_ONE
Im liking the color too. I have todo minor repairs to mine and ill be painting them too.
Sent from my LG-LS970 using Tapatalk
Yeah, what paint you guys use to paint your wheels? I'd also like to know what your using to paint the engine bays?
Sent from my Z796C using Tapatalk
Finally finished debadging the trunk and polished my tail lights again, much better!
http://img.tapatalk.com/d/14/04/21/yresevyp.jpg
http://img.tapatalk.com/d/14/04/21/nebuhe3e.jpg
Sent from my iPhone using Tapatalk
Nice work.. have you thought about geting some spacers?Quote:
Originally Posted by DTP
Yeah, once I roll the fenders I'll buy a set. I'm also waiting to find another set of wheels...Quote:
Originally Posted by pernir
Sent from my iPhone using Tapatalk
Rust oleum wheel paint and clear coat. Also layed down self etching primer first.Quote:
Originally Posted by 2002BlackDragon
Sent from my iPhone using Tapatalk
What size are those tires?
They look kind of small, making the wheel look like it needs a spacer. Usually eclipse wheels fill the wheel well pretty good.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Mine are 225/40/18
Sent from my iPhone using Tapatalk
^^^ Haha, I mean on Drews G, even the front wheel looks really sunk in.
Now im wondering if the fender was pulled.
Sent From My Rooted Galaxy Note 2 using Tapatalk
Ahhh I see what your looking at. Damn. Does look sunken. LoL
Sent from my iPhone using Tapatalk
Quote:
Originally Posted by oakrdrs187
Quote:
Originally Posted by oakrdrs187
I'm running the 205/40s that came with them... I wheel and deal a little so I picked these up cheap (pun intended).Quote:
Originally Posted by CHICAGO_ONE
I'm looking to get a set of 215/45/17 for future use
But here's the old set
http://img.tapatalk.com/d/14/04/21/ypa7u4yp.jpg
Sent from my iPhone using Tapatalk
You going to get rid of the gsx wheels? or keep em as spare shoes?Quote:
Originally Posted by DTP
Spare set, possible AutoX wheelsQuote:
Originally Posted by DEADEYES
Sent from my iPhone using Tapatalk
Cool deal.Quote:
Originally Posted by DTP
This page just makes me want another set of wheels or refinish my current set lol..nicely done fellas
I was always missing my driver side tweeter cover and i found two tweeter covers today for cheap from a 2000 jdm i was organly going to buy just the one but i thought it looks a bit off so ill buy em both... and i was right the JDM tweeter covers are some what bigger and dont fit to the usdm brackets (by like 3mm)
http://i1193.photobucket.com/albums/...4-23152802.jpg
Anywhozyz thought it trough that out there
also might get my hands on a jdm side skirt from the same car. should i try to remove the rib-its from the inner sideskirt when i pick it up or?
http://img.tapatalk.com/d/14/04/24/za5agaty.jpggot this put in after 2 days. Didn't realize how much of a pain in the ass it was going to be. Now all that's left is to do some work to the radio bezel.
The Bezel isn't too hard. Use QuikSteel putty.
While your screen is in the car and the bezel is installed...place duct tape or packaging tape on the bezel to mark the edges. Take the bezel out, keeping the tape on and press in the QuickSteel putty from the back. Go slightly over the edges of the tape. Let it cure, mark the edges with a marker, remove the tape.
You should be flush with the rest of the bezel. All you have to do it trim the edges with a dremel and then paint it
OR
Tightly wrap your screen in clear plastic wrap or aluminum foil and press the putty around the edges. Don't leave it there too long to cure as it gets kind of hot.
Then just block sand it and trim/smooth the edges... paint and done.
http://i111.photobucket.com/albums/n...6258D317FB.jpg
http://i111.photobucket.com/albums/n...625DAAB1F5.jpg
http://i111.photobucket.com/albums/n...FB0C3BF2D0.jpg
the HVAC controls need to be mounted further back. That take a decent amount of rigging.
thanks for the tip on the quicksteel putty. i'll try the first way by using tape to mark it. my climate controls are sitting in-between the bezel and the dash that's why its sticking out so far. I tried mounting it to the backside but it looked too far back in the bezel. I've got a few ideas to experiment with to see if I can get mounted to look as good as yours lolQuote:
Originally Posted by CHICAGO_ONE