2003 ES I4
Springs: Eibach Prokit
Shocks/Struts: KYB GR-2
Wheels: Kazera KZ-R 16x7
Tires 205/55/WR16 Kumho ECSTA Supra 712
3rd Gen. Eclipse OEM Strut Tower Bar
Printable View
2003 ES I4
Springs: Eibach Prokit
Shocks/Struts: KYB GR-2
Wheels: Kazera KZ-R 16x7
Tires 205/55/WR16 Kumho ECSTA Supra 712
3rd Gen. Eclipse OEM Strut Tower Bar
2000 V6 ES
Springs Eibach prokit
shock struts KYB AGX Settings 3/front and 2/rear
Wheels: 16 stock (winter)
18x7 (summer)
Tires 16 regular stock size
18 225-40-18 - Kumho
After lowering the car my ride is almost identical whether i am on 18 or 16, the only different is when hitting a bump you do feel it a little more but thats due to less rubber.
updated:
17x7 wheels
225/40/17 tires in front
215/40/17 tires in rear
KYB AGX struts
Eibach ProKit springs
18mm rear sway bar w/ poly bushings
rear camber kit
front adjustable camber kit
poly upper strut mounts
just got an alignment this week...
my shit pwns
1995 Galant
struts: Gab Super Street
springs: Eibach Sportline
wheels: 5Zigen 5ZR (18x7.5)
tires: Falken ZIEX 512 (215/35/18)
ps: all to be sold by spring/summer
MY INITIAL SET UP
1999 Galant ES
Springs - Tien S-Tech Sports Springs (3G Eclipse GS Application)
Supposed to be
1.8 front (actual was about 2")
1.2 Rear (actual was about 1.3")
Struts - KYB GR2 (3G Eclipse GS Application)
Shocks - KYB GR2
Rims - 2003 GTZ 16" rims
Tires - Generic
http://memimage.cardomain.net/member...9/402847_5.jpg
Ride was actually pretty good.
But had to replace the Eclipse struts after about a year and a half. I would recommend just putting the extra money in for the galant parts if you have them.
Didn't Rub
Didn't have to roll Fenders
Topped out veeeeeery rarely.
MY CURRENT SET UP
1999 Galant ES
Springs - Tien S-Tech Sports Springs (3G Eclipse GS Application)
Supposed to be
1.8 front (actual was about 2")
1.2 Rear (actual was about 1.3")
Struts - KYB GR2
Shocks - KYB AGX (set to 2)
Rims - 18" Alero Dyno Stars
Tires - Falken 225/40/18ZR
Strut Bar - Freedom Design
Camber - Home Depot Camber Kit - 4 washers per bolt.
http://memimage.cardomain.net/member...402847_106.jpg
Ride quality decreased with the new rims.
It's noticibly on turns stiffer with Strut bar. (not sure i like it)
Camber was not needed intially, became very noticible later.
Low Profiles tires did not rub.
Had to roll fenders.
Top out veeeery rarely.
Overall
Very agressive drop...i love how it looks.
<div class='quotetop'>QUOTE(Galant95)</div><div class='quotemain'>1995 Galant
struts: Gab Super Street
springs: Eibach Sportline
wheels: 5Zigen 5ZR (18x7.5)
tires: Falken ZIEX 512 (215/35/18)
ps: all to be sold by spring/summer</div>
You got the sportlines on, how low is the drop?
just finished mine:
2003 ES
17 Konig Imagines Opal finish
225/45 Ziex 512 Falkens
1.8" drop on Sprint springs
AGX's front and back. 4 position adjustables
2003 Galant ES i4
Springs - Tein S-Tech
Shocks and struts - KYB GR-2
Camber kit - not needed
Rims - Factory 16" alloy wheels
Tires - Goodyear Assurance Comfortred 205/55/16 all season radials
Definitely firmer and harsher ride with this setup, but body roll is significantly reduced. Handling is greatly improved. The car also looks much better without the huge wheel well gap. It dropped more than the Tein specification. I'd say about 2" in front and 1.7" behind.
1995 2.4 ES 4G64
Sprint Performance Sport Spings
KYB AGX Struts all the way around(all 4 struts were blown anyways)
KYB Strut Mounts
Progressive Camber Kit
Stock Wheels and rims for now till after the wedding
no STB yet either/however there is one by Stillen that i think will fit.
the Sprint springs took me by suprise. Definately worth looking into. especially if you are running on limited cash flow. the drop was a modest one (1.5-1.8)and the ride quality is really good. corners wonderfully. I am sure it will do much better with polyurithane bushings and a rear sway.
2001 GTZ
Struts and shocks: KYB AGX
Springs: Tein S-Tech
Camber kit: RRE rear spacers
Rims: 16" stock GTZ alloy wheels
Tires: Falken Azenis ST115 205/55/R16
STB: 3G Eclipse
Swaybar: ADDCO 22mm with SS endlinks
AGX is set to 3 all around, started on 4 but then I had to listen to my wife https://www.thegalantcenter.org/styl...lt/biggrin.gif
Whoever said it's love all over again... Now I know what he was talking about. Car takes corners like a champ, no more swingibingi while accelerating or hard braking, changing lanes is a 100% pleasure. And it looks awesome (ca 2" front 1.8" back), I love it!!!
update: Addco swaybar FTW! Honestly, I didn't expect a lot since the stock was 19 already, but I have to say, even that 3mm does make a difference
**UPDATED**
94 galant GS w/ 4g63t
-Kyb AGX all around w/ energy poly upper mounts
-eibach pro kit
-complete energy suspension polyurethane bushing kit installed
-Forza front strut upper bar
-obx rear lower strut brace
-front and rear ignalls camber kit.
-Konig Prophet 18" wheels on 225 40 18" nitto tires
-2g FWD RMDSM swaybars front and rear with poly bushings
-True JDM ralliart all aluminum 4 point front lower brace
anodize red
http://i20.photobucket.com/albums/b240/doh...thegoods004.jpg
http://i20.photobucket.com/albums/b240/doh...thegoods002.jpg
http://i20.photobucket.com/albums/b240/doh...thegoods005.jpg
http://i20.photobucket.com/albums/b240/doh...thegoods006.jpg
Weight loss
-complete a/c system delete
-battery relocate to the trunk
- cruise control system delete( non cruise throttle cable added)
-spare tire & jack delete (added AAA autoclub card to the center console)
Springs:Tein S.Tech
Shocks: F/ stock R/ KYB GR-2
Wheels: Force GR-5 18x7.5 (45mm offset)
Tires: Hankook K106 225/40/18
Near Future: 3G Eclipse Strut Bar.
is there any drilling of the firewall involved with the installation of this part?
Quote:
Originally Posted by lonestar22
No. The brackets that would mount to the Eclipse's firewall will not mount to the Galant's firewall on the account that the Eclipse's engine bay is about 2-3 inches shorter. The brackets on my bar just sit there, it isnt really noticeable. I thought about using a dremel to take them off, but im too lazy to mess with it.
Springs: Ground Control Coilovers
Shocks: KYB GR-2 all around
Tires: Kumho Ecsta 712 zr18
Near future: front upper strut bar and rear lower bar.
The ride was stiff in the begining but has balanced off nicely now. I would recomend them, if you could get them at a good price...
Quote:
Originally Posted by Darkkend
http://blaise.us/emots/offtopic.gif
http://blaise.us/emots/offtopic.gifQuote:
Originally Posted by proteusx301
Allan do your thing...
LOL Necromancy
Posted: Tue Jan 17, 2006 2:46 pmQuote:
Originally Posted by Kalamidad
Posted: Wed Apr 26, 2006 12:51 pmQuote:
Originally Posted by Kalamidad
And please explain to me how those post are off topic? cause I dont know how me asking John if he installed MY SUSPENSION PARTS is off topic in a thread called "Your Suspension Setup"?
Or a question about some ones SUSPENSION SETUP and being answered is offtopic?
Also your http://blaise.us/emots/offtopic.gif is http://blaise.us/emots/offtopic.gif and also http://forums.revora.net/style_emoti...fault/spam.gif
18" Arceo Dynostar
KYB AGX Adjustable Gas Shocks
TEIN S.Tech Lowering Springs
2001 GTZ, new setup:
Struts and shocks: KYB AGX
Springs: Tein S-Tech
Camber kit: RRE rear spacers
Rims: 17x7 Enkei EVO V
Tires: BF Goodrich G-Force Sport 225/45/R17
STB: 3G Eclipse
Swaybar: ADDCO 22mm with SS endlinks and PU bushings
this+solid motormounts=I love to drive more and more...
<div class='quotetop'>QUOTE(peanotation)</div><div class='quotemain'>updated:
17x7 wheels
225/40/17 tires in front
215/40/17 tires in rear
KYB AGX struts
Eibach ProKit springs
18mm rear sway bar w/ poly bushings
rear camber kit
front adjustable camber kit
poly upper strut mounts
just got an alignment this week...
my shit pwns</div>
update: full prothane polyerethane bushing kit installed all throughout car.
updated:Quote:
Originally Posted by qnz
tein basic coilovers - riding 1 finger gap all around
negative camber on rear tires. zero camber on front
18" g-games 77w by rays, 7.5" wide, +42 offset, 19 pds, gunmetal color
225/40/18 falken ziex512
dc sports strut bar
suspension techniques rear sway bar
rolled rear fenders
i scrape on almost everything now. and im not talking about my front bumper. i have to take driveways and dips slower. hard to drive slow when my suspension allows me to fly around turns without needing to even think about putting my foot over the brake.