no one was ever doubting Eric's, i dont even think he makes em for ppl anymore
Printable View
no one was ever doubting Eric's, i dont even think he makes em for ppl anymore
damn those look clean!! im def gonna get these. i say someone makes a tutorial on how to install :p
hey i kno its askin 4 too much? but im bout to buy these.. nd i have no idea how to assemble custom wire harness???? i have regular usdm headlights.. soo its bolt on i get that part+ i need to buy some h4 bulbs ? what else do i need to buy. oh yah r there any blue/white turn bulbs out there cuz with that headlight orange looks ugly ><
If you want HID's then you have to wire them up differently. You will have to buy an H1 HID kit and plug them straight to your stock harness.
If you don't want HID's, then you do not need buy anything else for these headlights. The headlights already come with the bulbs, which are H1 bulbs in both the low beam and the high beam.
Not sure if this has been asked yet, but if I get these heads, will the HID's I have in my stock USDM heads right now, fit right into these projectors without modification??
Thanks!
okayyy soo its pretty much jus plug any play if i use my stock bulbs?? oor new wiring needs to be done >< man need step by step tutorial how to instal these lol...
your are not going to use your old H4 bulbs, the new heads come with 2 h1 bulbs on each side, and they are already wired , plug and play to the h4 plug in the car, all you would need to do is just wire up the halos to a switch and maybe wire up the LED's if you want to another switch,,thats it
hmmm I wish there was an amber corner :(
also we probably need to get pics of the visibility of the corner lights at night
I'll take the Depo, or Erics. They look nice in the dark with the lights on, but close up and during the day the 3 side LEDs kill the setup.
they do look good, but id have to open the heads and cover those LEDS with some bondo & paint match it to car.
Ok Thats it.. I was going to purchase one VR4 from Hong Kong.. Fk... that... I am getting these!
I need to know if there is a how to wire them to my h4 plugs... I am a noob when it comes to electrical.....
From what I've read in this thread they come equipped with an H4 adapter so you still use your OEM harness
look at page 7 towards the bottom
I still dont get it....
do the heads comes with instructions on how to install?
THE NEW GUY HAS THEM JAVI!! http://www.cardomain.com/ride/3236726
now let ask him all the questions that we all wont to know lol
imo blue leds got to go thats just to muck light inside of a light
(I'm not explaining this to galant4life as he gets it - I'm explaining this to others that seem to have a hard time comprehending) Take the halo and LED wires and connect them straight to the corresponding (positive, negative, etc) wires on the turn signals or the foglights wires. Both of those lights (fog and turn signals) are operated by a switch. Turn either of those lights on, and the halo and LED lights turn on. Very simple installation and you won't need any extra switches to install.
Connect the wires using self-tapping wire connects, readily available at Radio Shack or online. This way you don't have to cut any wires to make the connection from LED wire to turn signal or fog light wire. My suggestion would be to tap into the turn signal wires.
http://www.switchfisher.com/navigati...all_xm_008.JPG
1 wire is the ground that you would split to the ground of the high and the ground of the low.
then you need to determine which is the high and low positive from the h4. and run the one to the high and then the other to the low. It's just like going from H4s to H1s and H7s for JDMS
I like these headlights better then Vr4 ones. They did a good job on them.
^but these are USDM fitment, which means you have to stick with a USDM grill and you'll have gaps if you get a JDM bumper
If I ever decided to mod the white Galant, I will not go the jdm route again. Maybe JDM skirts.
^buy daves vrg lip
lmao ^