i had mine wired like this
http://i143.photobucket.com/albums/r...1/DSC00621.jpg
using JDM harnesses, so i dunno whats correct
(park lights only on)
outers light up brighter and inner circles when brake
Printable View
i had mine wired like this
http://i143.photobucket.com/albums/r...1/DSC00621.jpg
using JDM harnesses, so i dunno whats correct
(park lights only on)
outers light up brighter and inner circles when brake
I personally like the outsides are the brake lights and the circles are the parking lights. Different strokes for different folks! If some body wanted the long clears on the bottom as brakes then let em lol
pretty much......looking thru my photobucket, i had too many G's
Thats how mine are wired
http://i828.photobucket.com/albums/z...8/IMAG0024.jpg
thats how i have mine wired also.Quote:
Originally Posted by wetamup2k3g
denver and corey have them wired correctly;;;i've had both 2nd and 3rd gens with the jdm male/female pig tail wired to usdm
2nd gens both inner and outer light up regardless if your braking or parking lights
http://i136.photobucket.com/albums/q...oliojrm/im.jpg
3rd gens both inner and outer light up only when braking the outer are on only when parking lights are on
http://i136.photobucket.com/albums/q...m/DSCN0976.jpg
4x4 yoooo lol
Someone should PM qcustoms...he's probably one of the few who knows what they should look like.
Well when I had my 2nd gen tails only the outside was the parking n both sides were the brake lights
I just matched the colors of the wires (JDM taillights harness-->car harness) like the tutorial says, (they were the exactly same colors), and they came out like corey and Qnz have them, but yeah qcustoms should confirm it
If the socket has three wires going to it, it is designed to have dual filament bulb. If just two wires it is designed only with a single filament bulb. In this case the JDM taillights use one 7443 (dual) and three 7440 (single) bulbs.Quote:
Originally Posted by OMEGA PHX
guys, but how to have the big rectangle lit up!! on my 3rd gens o have only a small outer part lit up when parking light is on. please tell me what u did!
European 3rd Gens dont have the whole rectangle light up, only a small section on the outer part of it lights up, if u want the whole thing to light up, u have to get JDM 3rd GensQuote:
Originally Posted by dimushor
mine came with 2 7443 and 2 7440....Quote:
Originally Posted by RedGalant2k1
I took her to get a nice shower this morning
http://i726.photobucket.com/albums/w...o/f5289322.jpg
http://i726.photobucket.com/albums/w...o/635b56dc.jpg
http://img.photobucket.com/albums/v5...a/IMAG0078.jpg
Took this at work what u think of the mirrors
HTC EVO 4G
Ok well it's been awhile since I've logged on mainly because the accident or execution of my g while I was at a red light. But anyhow here's a couple of pics of now is grind time....she's Gettin ready to get painted, just not sure what color, might keep it silver.
http://i1188.photobucket.com/albums/...3/bb649920.jpg
Just got 3G Jdm tails
http://i1188.photobucket.com/albums/...3/ff09ba19.jpg
Another set of Jdm heads and a VR-4 grill
http://i1188.photobucket.com/albums/...3/a399f75c.jpg
Jdm rear w/ext.,evo VIII wing, vor.gen.,vr4 skirts,vr4 flares
http://i1188.photobucket.com/albums/...3/eb1a9051.jpg
And here's a look at my front end setup...to be painted. New style VR-4 bumper, fbgls the tow hook cover and license plate location , vogue lip, d-technic fog light covers.
Lol here we go again
I got so much work to do it's crazy, wire the power Foldin mirrors, cut RAF sup for heads, retrofit heads wit projectors,100mm ccfls, drill the holes for the wing...if I use it. May have it up for sale...mount the skirts. Back bumper and flares from SoCal , flares I have no idea how he expected them to fit. I've tried contacting him no answer, oh well. I'll figure it out.word to the wise, go for urethane even if it costs more.
Damn glad u back at it homie!! Waiting on my spacers, then rims going on.
Sent from my iPhone using Tapatalk fam!
3rd Gens
Also in europe we cant use (well stock anyway) the inner red circle for parking or brale light. It only lights up when the rear fogs are switched on. They are basically high intensity red lights used for poor visibility conditions and can only be switched on if the heads are on. That leaves only the outer reds for parking / brake lights. Then the long clear rectangle is indicators (lights up orange) and the round clear is the reverse lights.
mine are taken of from a UK car. but as u said, i have only a small outer section lit up. now i plan to wire a double filament harness for the small circle to act as a parking light and as a brake lightQuote:
Originally Posted by QnzMostWanted
Lol so nobody was right or there are some different wiring harnesses with some 3rd gens... w/e wire them as you like, be uniqueQuote:
Originally Posted by The Vee
Yeah there's no wrong way, just my way is the right way.
LOL j/k!!
Yeah if I'd kept my 3rd gens on I'd definately wire them differently. Like one of the previous posters, i was not keen on just the very outer red lighting up for parking light. I believe if you can take them apart, there is a shield inside you can remove and then a greater area lights up. Not looked myself as I still have the altezza style ones on.
LOL Good answer!Quote:
Originally Posted by wetamup2k3g
I want said switch!!!!! lolQuote:
Originally Posted by The Vee
http://images.craigslist.org/5O05Q25...b6773f1c60.jpg
http://images.craigslist.org/5V15Y45...307ab310bf.jpg
http://images.craigslist.org/5W05X65...52fe3a1f18.jpg
Just picked up this 92 miata with a 98 motor, tranny and diff swap in it. 500 bucks. Runs like a champ :) 180k on the body, 80K on the motor. Let the chumpcar build begin :) :) :) :)
Greddy.. heres a dope Mazda you can use to motivate you for that one you got =]
http://speedhunters.com/archive/2010....aspx#comments
but on another note . . .
http://i1220.photobucket.com/albums/...s/5fa03585.jpg
edit. damn shitty iPhone FTL lol
To Greg what size spacers are u going with? Inch an a half?
37.25 mm?
:O
That would be insane.....
Not feeling the wing and canards on that Miata...Quote:
Originally Posted by E_Emerson88
Is that your Mom's Lambo parked next to the G? LMBO! **inside joke**
Fog light switch? - see what I can do. You'll need to do the wiring though.Quote:
Originally Posted by Corey2kG
Quote:
Originally Posted by cleazy123
Yeah that would have tremendous poke LOL! The smallest I could get was 19 mm for the spacer I went with, I just checked tracking, they should be here Monday, I may have to wait til Tuesday to get them on because I have some things taking place Monday, I just hope I don't miss the FedEx man.Quote:
Originally Posted by Blue8g
19mm ought to be pretty nice. 18x8 with an effective offset of 32...me likes.
I'm gonna pic whore the shit out of the wheel thread, be warned bro!Quote:
Originally Posted by Blue8g
hahaha, I'm cool with that, can't wait to see the result!
Tru tru, I got those black 19"s and they don't clear my brembos...tryin to rock those though but they didn't poke before but wit 1&1/2 spacers they'll definatelg poke huh? Gonna be putting those fender flares on though.
What offset, width are the 19's? You shouldn't need that much extra clearance.
when did you get a Dolphin Bumper Darren? we should have a meet soonQuote:
Originally Posted by Bonez
I've had it probably about a month now. Let's do it!Quote:
Originally Posted by E_Emerson88