That's because it's made by RPW.
Printable View
I have a feeling that nobody will know what I am talking about but its worth a shot I guess. The connectors in the engine bay, like injectors, cam, crank sensor, does anybody know what brand they are? I know that the evo ecu plugs are tyco and I can get that information on evom, but nobody on there even mentions the plugs. Basically I am going to redo the harness and make it completely hidden, but I'm not going to solder or use splices. I'm going to depin, repin, crimp and run all new wires from the sensors themselves to the firewall connections. I was hoping that maybe somebody knows the brand or knows where I can find the info for it?
Wish I knew. I just looked at mine, couldn't figure anything out.
Edit: a quick search shows KUM/Sumitomo connectors that look like ours, but nothing definitive.
This is some of the hardest info to find honestly. Back in the day spd_frk and I searched for a while. I believe they were Tyco. We found the pins for ecu side as well as several of the engine side connectors when we were making harnesses. I think I still have it in a binder somewhere I'll check and see for you J.
So all my parts come next week, which sadly means I will be missing the last autocross of the season... :( Other then that, still working on some things. But I will leave you with this picture, because it snowed, and its probably going to stay in the garage all winter long. That's me btw, and my dad lol
http://i739.photobucket.com/albums/x...psd2790e58.jpg
How do you feel owning a sick ride? lol your car looks beast
The rare photo of owner and car! Your g looks so mean
chase bay seems to use new plugs so they must be available. our oem harness uses almost all the same connectors on the engine side of the harness as an evo/2g so between these three sites i think you can get everything you need.
ecu plugs and pins
http://evoecu.logic.net/wiki/Plugs,_...and_Connectors
engine related plugs and pins
http://connectors.sheridanengineering.com/index-2.htm
also engine related plugs and pins
http://www.szabaga.com/store/diyconn.html
or you could buy a chase bay harness
http://www.evolutionm.net/forums/evo...ltech-com.html
Just like all of us on the forum, a proud galant owner man! But its a blast to drive, cause nobody expects this thing to be that fast.
Where is your pic or car and driver? wink wink! lol. I think it could be a little meaner IMO.. winter time... haha
You know whats nice? I found everything, EXCEPT the IAC and the front 02 connector. Thanks to your links, I have found the IAC, but I still need to find the front 02. I'll just take out the pins and see if those pins are used anywhere else. Thanks for the links man!
And NO don't use chase bays, IMO they have no idea what they are doing as far as a MIL-SPEC harness. They probably don't even know how to properly lace a harness. Oh well. This winter I will make a tut on wire tucking and mils-spec info.
Also, hopefully this winter I will be able to take care of the little stuff. IE interior and what not.
isnt this the front oxygen sensor connector
http://connectors.sheridanengineering.com/NMWP4F-B.htm
this site also has a lot of good stuff
http://www.bmotorsports.com/shop/
it is but it doesn't help me if I can't order it.
I have all the info I need for the pins, I just have to go out an see if I can track down some info on the besides the names that all these websites give out. I need to find the manufacturer and their code to order them for like 5 cents a piece, compared to 75 cents each, if you know what I mean haha
im confused why can't you order it?
I can... I fail at reading this entire week apparently.
haha its all good man i'll try and look for the connectors from the make but they usually have a minimum order per piece could be 5,10,50,100,500 ect. i would just pull the connectors from a junkyard galant/eclipse pocket them and buy new pins for everything
As of right now I don't need any connectors, and I broke a couple from the 3 or 4 harnesses that I have trying to get the pins out haha. I have to see how the connectors work, and now I know for sure on all the ones that I have to removed. The only PIN/ contact that I CANNOT locate is the stupid starter one. Its a weird looking female spade, I might have to save it some how.
are you talking about the one for the solenoid?
http://www.repairconnector.com/packa...ousing-5-pack/
the "pin" is in the discription
You're good. That's it.
Sent from my DROID RAZR using Tapatalk
glad i could help its something i want to do also so i had some of the research done
I'm watching this closely. I'd love to make a full harness to eliminate this mess in the engine bay. I don't mind pinning new plugs and running wires between connectors.
U better make this tutorial with part numbers to plugs!
Sent from my Galaxy S4