Printable View
Dirty and is begging for my springs to be put on still. Phone is still not capturing the true color of my fogs (a more pure yellow) but whatever
http://i795.photobucket.com/albums/y...16173442-1.jpghttp://i795.photobucket.com/albums/y...16173223-1.jpg
Not bad. That a tint film, or actual spray over the fogs?
looks good man, just gotta calm down that grill! its trying to fly away! lmao
I need a sunny day but I just put these on today.
http://i828.photobucket.com/albums/z...216_192837.jpg
lmao YESSSS what u think i should use double side tape or something? its on with zip ties thru the mesh part i put on but the ties r tight so it wouldnt bounce aroundQuote:
Originally Posted by Galantman03
corey i thought ur rims were bronze?
wheels are looking real good very nice pick up.Quote:
Originally Posted by Corey2kG
They are. But it's dark n need sun lol.Quote:
Originally Posted by Fresh_617
Thanks.Quote:
Originally Posted by Redhaze
Is your G lowered?
Nah. Stock height.
http://i828.photobucket.com/albums/z...216_192837.jpg
http://i1114.photobucket.com/albums/...1/757cb4d5.jpg
Hmm you might be right, mine is sitting kinda high. My rear looks lower than yours, do you have a sub in the back Corey?
looks like your tires are more round also that might make you gap seem smaller
Man IDK what to use, you need it to be easily removable(well maybe not, but i remove my front bumper like 6 times a month lol) maybe VHB tape, or industrial velco?Quote:
Originally Posted by Fresh_617
ahhh velco that makes sense where would i go about getting some of that like home depot? i havent taken off my bumper since i put it on tho im scared to mess up the paint but i suppose i would need to remove it at some point i just didnt want it to fly off if im on the highway or somethinQuote:
Originally Posted by Galantman03
There is less snow now, but I thought it was a good one
http://i720.photobucket.com/albums/w...09077110_n.jpg
http://www.shop3m.com/70006658457.ht...ogleProdSearchQuote:
Originally Posted by Fresh_617
Yeah I do but I have the ESv6 springs in the back still n the GTZ springs in front. My rear is higher without the box. As far as the front seems like a medical mystery lolQuote:
Originally Posted by wetamup2k3g
Duplicolor metal cast paint..yellow. the left fog lit up is a more accurate picture than the right. But the color is still off on the paint color in the picture with the lights off. Looks a lil on the mustard side in that picture. Its more like the fogs below except not as glossy because they were worn slightky prior to paint, and not as clear because they're not glassQuote:
Originally Posted by Skyforger
http://www.carid.com/images/winjet/f...30-0150-12.jpg
ZOMG thats so much better! Looks sooo good!Quote:
Originally Posted by Corey2kG
Nice, car is looking good!Quote:
Originally Posted by johnygezony
LOL medical mystery indeed. She looking good tho Corey! Johnygezony, I don't think I ever saw your car before bro, looking good! 8thLS6, fogs look good, nice deep yellow, you can see it in the passenger fog. Fresh, the car is looking good man!
http://i174.photobucket.com/albums/w...0/6eedb23e.jpg
This one was taken mins before I bought my new wheels which are on the post above.
Whatcha doing with the Evo wheels?
Sweet, I can easily get a hold of that paint. What prep work is involved?Quote:
Originally Posted by 8thLS6
Also: you using yellow halogens, too? Or standard ones?
I sold them to some guy on EvoM, you interested in them I have a friend selling a set too the only problem is that they where spray canned black.Quote:
Originally Posted by Skyforger
Eh...I'll pass.Quote:
Originally Posted by Laidback8g
Evo 8 Enkei's and Rota Boost? The same exact 2 pairs of wheels on my car and in the garage next to it lol
Lmao that's hot yea I'm gonna strip them down and paint them bronze pics will be up next week or so lol
Thinking about it.. Has the car had any suspension work or been damaged in the front end of any sorts? Maybe the PO replaced the GTZ springs with the ES v6 springs?Quote:
Originally Posted by wetamup2k3g
As far as prep..I just used some stoner Invisible Glass glass cleaner and paper towels with pressure while scrubbing the lense. That's it lol, besides masking everything off with aluminum foil and some painters tape. I didn't even take them apart from the housing to paint, cause frankly I didn't know how. Just slide the foil under/ behind the lights, and fold the edges over/around the housing. Spray light coats, cause heavy coats definitely affect clarity..also its gonna look hazy until it dries fully, then it becomes clear (kinda weird). What you can do in between coats is use a hair dryer to speed it up cause it drys fast. Last but not least, I do have yellow halogens. Good luck if you give it a tryQuote:
Originally Posted by Skyforger
Thanks! Past couple of pages are displaying some good looking GsQuote:
Originally Posted by wetamup2k3g
Awesome. Thanks for the tips, giving this a go when it's warmer outside.Quote:
Originally Posted by 8thLS6
Got $90 in tips tonight. Gonna make a box for the 15 I got for free and buying some yellow box fog lights tomorrow after work <3
No, according to the PO and from what I've seen looking under the car, she's had no accidents and the suspension looks all original, they babied the car before I got it. It was a family car for a family that got too large for it.Quote:
Originally Posted by Bloody Arro
When I got the car and changed from eibachs and teins springs, the rear height looks ungodly higher than most Galants on here. For the longest time couldn't figure out why it was doing so. When I got progress springs it lowered it out a little, then I got brand new gr-2's which evened out the height. Later found out it was a combination with how much freight you put inside the trunk and the condition of the rear shocks. Now I don't have that kind of issue since getting those coilovers. Yay!
http://sphotos.xx.fbcdn.net/hphotos-...67402774_n.jpg
^ Hey Pete, what are you gonna do with your previous setup?
Do you have a sub or anything?Quote:
Originally Posted by G-spot
I hope someday that my car is as clean as yours, Pete!
Sent from my LG-P925 using Tapatalk
I do have a sub box, a bag of tools (sockets and ratchets, wrenches, a couple screwdrivers, a pry bar, a 32-oz hammer), a bucket of vital fluids (oil, antifreeze, PS fluid (ATF), windshield washer fluid, tire shine) and a 2-ton (read: small) hydraulic jack in my trunk. Oh, and a spare "Mitsubishi V6 24 Valve" stamped valve cover back there too. So maybe that weight has my back weighed down and is pulling my front up slightly.
Quote:
Originally Posted by Fresh_617
Quote:
Originally Posted by Corey2kG
It seems that we are growing here in Massachusetts........ we should have a mini-meet....what do you guys think?
I'm down for a meet but I'd have to ride with Corey since my car is down lol
http://img.photobucket.com/albums/v5...a/IMAG0199.jpg
Sent from my PC36100 using Tapatalk