Who's car was this??Quote:
Originally Posted by boosting90
Sent from my LG-H830 using Tapatalk
Printable View
Who's car was this??Quote:
Originally Posted by boosting90
Sent from my LG-H830 using Tapatalk
Same and only owner. He bought car brand new
Sent from my SM-N920T using Tapatalk
Ahhh
Sent from my LG-H830 using Tapatalk
Closer to finish the downpipe. Is in one piece now. Test fit. And clean and ceramic coating.
http://uploads.tapatalk-cdn.com/2016...5602f88fdd.jpghttp://uploads.tapatalk-cdn.com/2016...15aa136858.jpghttp://uploads.tapatalk-cdn.com/2016...3a6466ae2a.jpg
Sent from my SM-N920T using Tapatalk
I say this with no welding experience, but those are some clean welds
Thx bro. Im still learning.Quote:
Originally Posted by 8thLS6
Sent from my SM-N920T using Tapatalk
Coated!
http://uploads.tapatalk-cdn.com/2016...15417831e7.jpg
Sent from my SM-N920T using Tapatalk
http://uploads.tapatalk-cdn.com/2016...eb77fc7901.jpg
http://uploads.tapatalk-cdn.com/2016...287e8bbdf1.jpg
Sent from my SM-N920T using Tapatalk
Its a wrapped!
http://uploads.tapatalk-cdn.com/2016...6700af6ee6.jpghttp://uploads.tapatalk-cdn.com/2016...ab07fc562f.jpg
Sent from my SM-N920T using Tapatalk
Downpipe done. (Hanger is till it makes it to muffler shop). Return line done.(heat wrapped inside with a heat blanket). Re did return line, and took xd_01 advice and straighten and incline line so no kincks and no tight corners so oil dont sit. http://uploads.tapatalk-cdn.com/2016...99c47e9652.jpghttp://uploads.tapatalk-cdn.com/2016...d1dfa915a5.jpghttp://uploads.tapatalk-cdn.com/2016...83fca0f123.jpghttp://uploads.tapatalk-cdn.com/2016...6a22715076.jpg
Sent from my SM-N920T using Tapatalk
Looking good man!!!!
Thank u bro.Quote:
Originally Posted by coconut
Sent from my SM-N920T using Tapatalk
New axles, front suspension on. Front wiring on. Put some eyes on the galant. Getting there! http://uploads.tapatalk-cdn.com/2016...cbe361612f.jpg
Sent from my SM-N920T using Tapatalk
Wish i had the time and money to due such a project Keep up the progress in the build otherwise looking good
Thank you. I appreciate thatQuote:
Originally Posted by bryanjordan
Sent from my SM-N920T using Tapatalk
I have my oil drain in the same spot and its a tight fit with the exhaust for sure. I have an extra evo oil pan that I need to clean up and repair but my setup works right now so dont fix what aint broke.
Car is coming along man. cant wait to see the final product
I hear ya. Thts why i left it alone and make sure as xd 01 said not to make it tight radius. I know it will do its job.Quote:
Originally Posted by 4g63lover
Thanks alot bro. I cant either. Need this car gone. Lol
Sent from my SM-N920T using Tapatalk
Theres really only so many ways you can route that return line so you just have to avoid tight bends as much as possible but it looks fine. If there is a problem it will begin to leak a lil oil and smoke from the exhaust housing. Either the oil level is to high or its possible you have a tight bend but it looks pretty smooth so youll be fine.
I think so. I make sure my turn were wider than a 90° bend. And inclines down so it wont get stuck. Thanks for ur input.Quote:
Originally Posted by xd_01
Sent from my SM-N920T using Tapatalk
Speed sensor wired. Wideband wired. Oil press wired. Removed ecu. Removed all the bad wiring out of this sucker. People before me sucked ass installing electronics. Smh
http://uploads.tapatalk-cdn.com/2016...1402198cf8.jpg
Sent from my SM-N920T using Tapatalk
where in central florida are you?
West side clearmont area.
Sent from my SM-N920T using Tapatalk
IAT sensor in,charge pipe in, gauges wired and installed.
http://uploads.tapatalk-cdn.com/2016...0c695840cf.jpghttp://uploads.tapatalk-cdn.com/2016...5432f0bece.jpg
Sent from my SM-N920T using Tapatalk
Niiiice bro
Sent from my SAMSUNG-SM-N920A using Tapatalk
ThanksQuote:
Originally Posted by GP007
Sent from my SM-N920T using Tapatalk
We making noise! We got power. Compression 145-150psi
http://uploads.tapatalk-cdn.com/2016...d011e98a86.jpghttp://uploads.tapatalk-cdn.com/2016...a5ee726ce2.jpg
http://uploads.tapatalk-cdn.com/2016...cfd1b8f5df.jpg
Sent from my SM-N920T using Tapatalk
Getting closer!!
Indeed. :)Quote:
Originally Posted by xd_01
Sent from my SM-N920T using Tapatalk
Night in the office! http://uploads.tapatalk-cdn.com/2016...d0e5e5a631.jpg
Sent from my SM-N920T using Tapatalk
Well need to get a hold of tuner cuz we ready!!!! http://uploads.tapatalk-cdn.com/2016...48af6f3324.jpg
First start up
https://vimeo.com/174292683
Sent from my SM-N920T using Tapatalk
Nice!
Got some time for a basemap and tuning. But develop an oil leak so had to stop. Will try soon again.
http://uploads.tapatalk-cdn.com/2016...44fca73238.jpg
http://uploads.tapatalk-cdn.com/2016...ffefeae622.jpg
http://uploads.tapatalk-cdn.com/2016...0361ff0b86.jpg
Sent from my SM-N920T using Tapatalk
Where's the oil leak coming from
Sent from my LG-H830 using Tapatalk
From the left balance shaft. I overlooked the sleeve tht cover to proper seal make a seal.
Sent from my SM-N920T using Tapatalk
Thought u fixed that already
Sent from my LG-H830 using Tapatalk
I did was just updating here. Lol
Sent from my SM-N920T using Tapatalk
Oh alright
Sent from my LG-H830 using Tapatalk
Yea no leaks just running rich as fuck. Lol
Sent from my SM-N920T using Tapatalk
Awesome!!!
And there it went! These build is closed! On to the next.
Click the play
https://vimeo.com/180318791
#HomeMade
Sent from my SM-N920T using Tapatalk