How do you like that manifold? I might run the same one since I'm doing a half radiator Anyway.
Printable View
How do you like that manifold? I might run the same one since I'm doing a half radiator Anyway.
Thanks man its still work in progress. More stuff to be done.
I like it. Clearance from starter is awesome beatd using two spacers with the evo turbo. And I was able to squeeze a 3" downpipe without much hassle.
Sent from my Galaxy S4
Didn't underrated say he ran around 400hp out of it??
Sent from my Galaxy S4
Brandon has an Evo specific manifold on his car. I don't think he's ever ran this one. I remember he ran a cast dsm, a Megan tubular, and his current Evo tubular.
http://img.tapatalk.com/d/13/12/23/u8y3e7uz.jpg
This is pic was posted by Brandon before. I saved it a while back. Can't remember what thread it was in.
Sent from my Galaxy S4
I stand corrected Brandon did have this manifold. I'm contemplating it just making sure it will be efficient enough on my setup for my goals.
http://img.tapatalk.com/d/13/12/25/bazuhe6u.jpg
This should be interesting.
Sent from my Galaxy S4
Looks like fun! Love soldering. As long as you know what's what. Haha
Sent from my iPhone using Tapatalk
I hate soldering. I don't even think I know how to solder properly lol got some pointers Jon??
Sent from my Galaxy S4
Use flux.
Put shrink wrap on first, twist wires together neatly, warm the wires up with the tip of the soldering iron, touch the solder wire to the solder iron, apply neatly, don't inhale the fumes, let joint cool, give the wires a little tough to make sure the joint is good, slide the heat shrink over the joint, apply heat to the wrap ( i use a lighter, some use the iron but I don't know how to) and done. Hold the soldering iron like a pen and only the tip of the iron is the sweet spot.
I'm soldering wires to pins. Not wires to wires.
Sent from my Galaxy S4
Don't solder to pins, crimp pins on. Don't use flux, use flux cored solder.
Sent from my DROID RAZR using Tapatalk
Started with this
http://img.tapatalk.com/d/13/12/31/6esezena.jpg
5 hours later I got this
http://img.tapatalk.com/d/13/12/31/6ehujepe.jpg
Now it's almost 6am and I have a long day ahead of me. Time to get some sleep.
Sent from my Galaxy S4
The harness works. Flashed an evo rom that was given to me by 01galant01 and Marc verified it is a good one for me to use to get me to sort out my issues.
I have an idle issue. I think my iac is bad. I also have a camshaft sensor code.
Ordered a new iac. New cam reluctor. And NGK spark plugs so I can run the proper plugs.
Next on the list is a shorter intercooler to allow me to run my crash bar.
Sent from my Galaxy S4