Installed an hid relay harness inside the fuse box ill post a how to later with pics
HTC EVO 4G
Printable View
Installed an hid relay harness inside the fuse box ill post a how to later with pics
HTC EVO 4G
new hids 6&3k
[IMG]http://i1188.photobucket.com/albums/...58893574_n.jpg[/IMG]
tryed some 3d c.f vinyl on the gas cap!
[IMG]http://i1188.photobucket.com/albums/...16090423_n.jpg[/IMG]
gas cap looks good
^ X2 but like i said on FB, get that yellow film
i know lol!Quote:
Originally Posted by Rach3T8G
just wait for it to break in before you decide, because they will get deeper and more rich in color
This. Polly between 20 and 50 hours they will color shift.Quote:
Originally Posted by mrg7243
I havent had my two 10" subs in there for more than 2 yrs. Got tired of the heavy bass and the lack of space.Quote:
Originally Posted by DTP
LOL!Quote:
Originally Posted by oakrdrs187
x2Quote:
Originally Posted by 99 galant
Ah spent some time with my car, the laptop, some wifi.........dont think dirty now haha, and the tactrix. Did some latency adjustments to try to bring the stft down, but got frustrated since the ECU hasnt cycled yet, I need to go do some driving.
Inner and outer tie rods...and hopefully alignment soon to fix tire wear
You wanna talk trunk space issues? Lol!Quote:
Originally Posted by IVORY_G
http://i1199.photobucket.com/albums/...1419658698.jpg
Since you are doing quite a bit of research on HID retrofits and you are beginning to move forward with it, I have to ask, Why not just buy a DDM kit and select D2S as bulb size?Quote:
Originally Posted by wetamup2k3g
Oem bulbs are the only ones to be trusted when it comes to projectors, mainly optics. See, oem bulbs are more than likely to be straight, where as rebased have a greater chance of being not straight. When it comes to the optics of projectors, the littlest error can produce a bad cut off or a dark spot.Quote:
Originally Posted by oakrdrs187
Am I making sense? Lol
Just finished buying the ss lines for the brembo caliper (front) install tomorrow. Hopefully I'm going to have my girlfriend assist me with taking pictures, so I can do a write up.
I know exactly what you mean. No newb here, I was mainly referring to cost. I also went over to hidplanet and did a bit of homework and now they have me thinking twice about aftermarket kits. LoL.Quote:
Originally Posted by carl3g
In reference to the example you gave about arc positioning, on the Tahoe/Yukon forum I go on from time to time, one of the members had a bad experience using eBay projectors with a PnP kit, he said the output sucked and posted pictures of drastically affected cut-offs and dark spots.
Yeah that's ridiculous! LOL! That's how my first S13 (240SX) was when I stuffed two 12" subs in the trunk. Only space to put stuff on the sides and that was it! LOL!Quote:
Originally Posted by oakrdrs187
LOL. talking about losing some HP there. :119:Quote:
Originally Posted by oakrdrs187
I replaced the neutral safety switch, hoping it was the fix my car needed to start. No such luck. :sniff:
Hids in halogen projectors will do that lol. Hell, Halogen bulbs in halogen projectors from ebay suck. My buddy has a tc that's a show car with halogen projectors and its god awful.Quote:
Originally Posted by oakrdrs187
The way I see it, can't lose HP if you never really had any LoL!Quote:
Originally Posted by Isaurio
I save on speeding tickets though, with this weight plus 20's I couldnt drive fast if I wanted to. The big wheels do keep my rpm down too, I know it stresses it but that's why I avoid punching as much as possible.
2500 RPM @ 65 mph is where I'm at.
Carl stole the words out my mouth to answer your question Vic, I want OEM quality if I do this retro, which is why I'm questioning if I even want the FX-R's since they are knockoffs, but they have better output than the OEM FX35's and the reflector bowl stands up to the heat with no problems. So I'm gonna stick with them.
You just witnessed me change my mind back and forth in this post about my retro lol!
http://i1188.photobucket.com/albums/...3/3d038500.jpg
http://i1188.photobucket.com/albums/...3/5b0716dc.jpg
http://i1188.photobucket.com/albums/...3/992659b8.jpg
http://i1188.photobucket.com/albums/...3/fade1fef.jpg
http://i1188.photobucket.com/albums/...3/a3009af9.jpg
http://i1188.photobucket.com/albums/...3/56705619.jpg
http://i1188.photobucket.com/albums/...3/161adb58.jpg
Tomorrow fitting the fender flares , rear bumper,extns, friday all parts including vr4 skirts are. Going On blending fenders ...keeping silver
Shit is looking nice are those jdm mirror covers is so how did you take them off
Fir you Greg, Lexus rx350 projectors.
http://i847.photobucket.com/albums/a...t/3796f380.jpg
http://i847.photobucket.com/albums/a...t/a30a3438.jpg
http://i847.photobucket.com/albums/a...t/16448dde.jpg
Looks good deez. Are you just going to leave the reflector off?
Cleazy, im guessing you painted theses yourself? I would love to get into a paint booth and learn how to spray.
No actually...close freind of family...I would love to learn too
Theres a tutorial here on tgc for the dismantle of vr4 mirrors
Ok didn't know that thanks will look it up
@ Dion car is looking good love the projectors
Btw get the mirrors from uk eBay if u do...cheaper than Japan or hong kong...there too overpriced
I already have a pair had them for months now just never got to painting them I paid $140 I believe or less
[QUOTE=carl3g;718482]Looks good deez. Are you just going to leave the reflector off?
Maintained reflectors
Thanks Carlos and it's only going to get better..Quote:
Originally Posted by 99galantES
That's tits. The whole car is tits. Good to see you're still aliveQuote:
Originally Posted by deeznutz
Sent from my iPod touch using Tapatalk
Thanks Carlos and it's only going to get better..[/QUOTE]
Cant wait to see that beast again
Thanks Dion, I like those projectors too! Damnit now I might wait and do JDM's again, so many options, not enough $$$!!
Well I found out the best way to get projectors is to go dumpster diving like a fat rat in the body shop dumpsters or have friends who own them, they throw away tons of heads with broken tabs and cracked lenses!!! Also you'll be surprised that different manufactures are using the same projectors..
Found the tut Carlos
https://www.thegalantcenter.org/showthread.php?t=27341
Can u snag me a set?Quote:
Originally Posted by deeznutz
HTC EVO 4G
converted back to the stock wheels for the winter and sold the konigs. on to bigger and better things....well not bigger. I think I'am gonna go 18x8 this time
Can you snag me some too?Quote:
Originally Posted by deeznutz
Sent from my iPod touch using Tapatalk
Just blew a shit load on car audio because i got sucked into the sales..ill most likely regret it in the morning..bought some R1concept brake rotors and pads WELL OVER due for some... my eyes are bloodshot red must sleep now....