Most of you know me on the other forums as 97dsmturbogalant, but thought id'e change it since the 97 is long gone. I own a 1994 galant s. Iv'e done allot to this car so far but the work is not done yet. Current mods include, Evo 8 wing, 14b turbo, Converted the car to power everything, 3" turbo back exaust with a rossi metal spun cat, Glow intrument cluster guages, Dual illuminite mids all around, ect. I could go on about the mods and parts but wanted to get on with the dohc swap. I stripped a 1994 galant gs from the j/y for $80. Got everything from the rear disks, Rear sway bar, The WHOLE harness from the car, The head with the intake manofold, sensors, relays, etc., Fog lights, intrument cluster, and so on. Planning on swapping in the head in a couple of weeks and the harnesses. Still have to get a head gasket, Timing belt, And misc. odds and ends. Allready swapped in the rear disks and rear sway bar. Planning on only running about 300 hp out of this setup. Turbo hasnt been plummed to the intake yet but do have all the parts to finish it, car just has 250,000 on it and It tappes at the top end allready and want to do a hone job and stick the new forged pistons in that have been collecting dust for the last year. Pic's will come once I get them uploaded to Photobucket. Maybe by that time the car will be painted flat black (for now).
http://i481.photobucket.com/albums/r...Galant-s-1.jpg
http://i481.photobucket.com/albums/r...Galant-s-2.jpg
http://i481.photobucket.com/albums/r...Galant-s-3.jpg
http://i481.photobucket.com/albums/r...Galant-s-4.jpg
http://i481.photobucket.com/albums/r...Galant-s-5.jpg
http://i481.photobucket.com/albums/r...Galant-s-6.jpg
http://i481.photobucket.com/albums/r...Galant-s-7.jpg
http://i481.photobucket.com/albums/r...t/P3020243.jpg
http://i481.photobucket.com/albums/r...t/P3020244.jpg
http://i481.photobucket.com/albums/r...t/P3020245.jpg
http://i481.photobucket.com/albums/r...t/P3020246.jpg
http://i481.photobucket.com/albums/r...t/P3020247.jpg
http://i481.photobucket.com/albums/r...t/P3020251.jpg
http://i481.photobucket.com/albums/r...t/P3020252.jpg
http://i481.photobucket.com/albums/r...6/P4250317.jpg
http://i481.photobucket.com/albums/r...6/P4250318.jpg
http://i481.photobucket.com/albums/r...6/P5160341.jpg
http://i481.photobucket.com/albums/r...6/P5160342.jpg
http://i481.photobucket.com/albums/r...6/P5160343.jpg
http://i481.photobucket.com/albums/r...6/P5160344.jpg
http://i481.photobucket.com/albums/r...6/P5160345.jpg
http://i481.photobucket.com/albums/r...6/P5160346.jpg
http://i481.photobucket.com/albums/r...6/P5160347.jpg
http://i481.photobucket.com/albums/r...6/P5160348.jpg
http://i481.photobucket.com/albums/r...6/P5160349.jpg
http://i481.photobucket.com/albums/r...6/P5160350.jpg
http://i481.photobucket.com/albums/r...6/P5160351.jpg
http://i481.photobucket.com/albums/r...6/P5160352.jpg
http://i481.photobucket.com/albums/r...6/P5160354.jpg
Ok, so here's the pic's of the gs dohc swap parts.
http://i481.photobucket.com/albums/r...6/PA290004.jpg
Combustion chambers look exceptionally good.
http://i481.photobucket.com/albums/r...6/PA290005.jpg
Only one of the combustion chambers look like it was burning a bit of oil. Getting block from same car tomarrow and doing a hone job and installing the new pistons I've had for months.
http://i481.photobucket.com/albums/r...6/PA290006.jpg
http://i481.photobucket.com/albums/r...6/PA290022.jpg
http://i481.photobucket.com/albums/r...6/PA290007.jpg
http://i481.photobucket.com/albums/r...6/PA290009.jpg
http://i481.photobucket.com/albums/r...6/PA290010.jpg
http://i481.photobucket.com/albums/r...6/PA290011.jpg
http://i481.photobucket.com/albums/r...6/PA290012.jpg
Found out the valve cover has a hairline crack in it at the front, sucks.
http://i481.photobucket.com/albums/r...6/PA290013.jpg
http://i481.photobucket.com/albums/r...6/PA290014.jpg
http://i481.photobucket.com/albums/r...6/PA290015.jpg
http://i481.photobucket.com/albums/r...6/PA290016.jpg
Under dash harness and engine management harness.
http://i481.photobucket.com/albums/r...6/PA290017.jpg
Cant figure out what this is, it says trw on it and looks like it,s been installed on the harness.
http://i481.photobucket.com/albums/r...6/PA290018.jpg
Another view.
http://i481.photobucket.com/albums/r...0020Edited.jpg
Under dash harness 2. You can see the trw box that has been installed in the circled part and the trw box. Anybody know what that might be????
http://i481.photobucket.com/albums/r...6/PA290021.jpg
Crank sensor.
http://i481.photobucket.com/albums/r...6/PA290023.jpg
The old 97's head up for sale. Only 80,000 on it.
Pic's of the installed gs items comming tomarro when it stops snowing. I still need to get the block tomarro and getting the trans also from the gs, my trans syncro's are bad in 1st and 2nd and its not shifting as good as it used to. Still need to get the gs head gasket and timing belt for the swap. The gs in the Jy still has a timing belt and it looks to be good, but im going to get a new one just in case. I thought I heard something about a greddy kevlar lined timing belt??? Do they offer them for the gs motors or is the 4g63t belt the same?? I hope everything comverts without any problems, I dont have any galant members out here close except boostzealot and scsi and they've dissapeared off the face of the earth and dont know much about the 4g64's. wish me luck.