Addco rear sway bar for the 8G *UPDATE - THE NEW ONE FITS!*
After months and months of having the bar on order, it was finally produced and I got it two weeks ago. This past weekend I finally got a chance to install it and it doesn't fit! The bar bolts up to the crossmember just fine, but then the ends are too long to be able to attatch to the stabalizer links. Addco supposedly had a problem with their prototype and fixed it, but apparently not, unless this is a different problem. The stock bar took forever to get off becuase the nuts for the stabalizer links were rusted on really bad. After all the trouble to get them off, then find that the new bar doesn't fit, really sucks! Also, the holes in the brackets that hold the bar to the crossmember were punched out poorly and had to be opened up more with a dremel to get the bolts to fit through. Here is a pic to show you where the bar is too long.
http://www.dangerdanj.com/rsb_bad_fitment.jpg