Im in need of education on something....i keep seeing people answer questions with "look up a 380"...is the 380 a particular year model? is it a galant from a different country? how would you go about searching 380 on ebay? lol
Printable View
Im in need of education on something....i keep seeing people answer questions with "look up a 380"...is the 380 a particular year model? is it a galant from a different country? how would you go about searching 380 on ebay? lol
https://www.thegalantcenter.org/show...&highlight=380
EDIT: Search feature helps.
Sent from my iPod touch using Tapatalk
the 380 has the non Mivec 6G75 out of the GTS, however if it has some differences in the fuel delivery for emissions if memory serves me right.
When it comes down to the frame and brakes... I don't know.
I'd like to think it has the same auto tranny in our 9G ralliarts, it also comes in a 5 Speed manual, meaning it's different from the 4G eclipse (it's a 6 speed).
It's the aussy version.
Cheers,
-M
IIRC, the 380 meets EURO4 standards, I have no idea where is our 9G is on this.
What are you tying to do? There are lot of differences that might be completely irrelevant to you, like a Bosch ECU, or the cams and a bunch of other "small" things, but basically it's the Aussie version of our 9G.
I hate to cite wiki, but wth: http://en.wikipedia.org/wiki/Mitsubishi_380
380?
I own six of them, including two supercharged versions.
I have also completely disassembled one of them that was wrecked, into boxes of nuts and bolts.
It is almost identical to the 9G except for the steering wheel is on the right and the main ECU is a Bosch.
If you need any info ...just ask....:orangeyes:
nice
Quote:
Originally Posted by redblower
How does your new forged engine rebuild go in your car ??
Which of your many cars is it in ??
What did TMR think of it ?
How goes the progress on the AWD 380 ??
since u have the 380 im wondering could u send me some stuff?Quote:
Originally Posted by redblower
Yea that ^Quote:
Originally Posted by FirstWHIP9gen
It is running perfectly, I took it on a non stop 4000k reliability trial a week after i got it all re-tuned.Quote:
Originally Posted by wicked380
Dynoed at 196kw at the wheels, larger 7th injector fitted.
Melb-adelaide-broken hill-mildura-canberra-sydney-melb-geelong.
It's a perfect build, it ran and still does without any violence or bad manners.
I am absolutely delighted with the engine at this stage.
Just got a quote for full ECU replacement and twin turbo,custom headers,full twin exhausts...etc
It's in the GT which is also on LPG (butane).Quote:
Originally Posted by wicked380
The GT has the Quaife Limited slip differential modification that I pioneered, so it seemed like the logical choice....any other of my cars would just torque steer all over the place with the power I expect shortly.
Quote:
Originally Posted by wicked380
They are used to me and my crazy ideas...:icon_biggrin:
They said they were presented with a fully closed engine, they allowed 3 days for the job and it was done in one day.
The only issue they had was that the sprintex supplied smaller pulley didn't fit,(series 3 pulley, and I have series 5)
Am having two custom pulleys fabricated this week....10 and 12 psi.
That will be the extent of my pursuit in the supercharger boost stakes.
If it doesn't satisfy my requirements I will move to a different solution.
The AWD K-frame has been held up by the steering tie rods needed re-work, the K-frame needed a hoop fabrication and the rollover engine mount needed complete re-design.Quote:
Originally Posted by wicked380
Monday...(tomorrow is the next key date)
Quote:
Originally Posted by FirstWHIP9gen
I can send you anything reasonable in size and weight.
The postal service will not allow a rear wing spoiler for example....it is 6 inches too long...even if boxed up diagonally.
Using companies like DHL is a waste of money....so if it can be posted, no problem.
Built a new shed to store some of my toys in.
http://img854.imageshack.us/img854/9969/63194536.jpg
http://img135.imageshack.us/img135/6346/76651998.jpg
http://img684.imageshack.us/img684/483/93834536.jpg
http://img813.imageshack.us/img813/3343/67858113.jpg
http://img189.imageshack.us/img189/8463/13020273.jpg
goodness you love 9G/380's, that's lookin' good dude!
hey blackstar, gonna do something bout the swamp out front? wouldnt want the prides and joys to get dirty when you take them for a spin :P
still thing you should take the high rise spoiler off the GT - and i know you think otherwise :P
is this where club9g ended up? seen a few familiar posters?
wow!
what about tail lights or head lamps ?Quote:
Originally Posted by redblower
tail lights we could send across for you boys. but 1. they would require some mods to fit as or signals are in the side panel where you guys have reflectors, and one of the big ovals is dedicated solely to reverse lights. there is common disatisfaction with the 380 gt/vrx taillight setup being that in the sun the signals are particularly difficult to see.
the base model 380 ones look plain ugly :P
on topic of headlights... bonnet would need to be changed also google an image of the 380 vs a 9gen. they have subtley different shaped headlights. yours are more square...
If you want headlights or taillights and can accept the work you will need to do then no problems..Quote:
Originally Posted by FirstWHIP9gen
They will ship by normal post easily.
Just tell me what you want.
sweet garage !
what about brakes calipers or are they the same as mine? and what kinda suspension setup do u haveQuote:
Originally Posted by redblower
calipers i think are the same as you have. havent got a good pic but the one on the left is the standard 380 front caliper and disc
http://img576.imageshack.us/img576/9291/18122010126.jpg
I think the suspension setup is the same also, however i do remember that was one of the things MMAL harped on about when they said they had 'australianised' it. think the changes were just stiffer shocks/springs.
hard to tell for sure never having seen a galant
is there a US version of the grills? Or like an ebay replica? I havent been able to find one..I have an 08 2.4l
grille... not sure whats available in the states, but i have seen some 9gs on here with a full black mesh look to them across the front though they retain the odd looking beak bit your galants have. all 9gens will be interchangable so no need to say you have 08 4 banger :PQuote:
Originally Posted by Villain