Quick people!

Printable View

02-01-2007, 08:12 PM
lKoRTy

Quick people!

"17" BBS RKs, silver finish and carbon fiber center caps. 2 are perfect and 2 have some rash on them. have tires w/ over 75% tread life. great wheels for winter or for a wife's car. these wheels are pretty expensive, new. but i only want 300 OBO and i stress the OBO. 5x114.3 bolt pattern"
"i wanna say 35, i think that's what is stamped on the wheel. i can go re-look in a few. yea it says 35, 17x8"
"tires:Sumitomo HTRZ 225/45/17"
http://gallery.wewt.net/albums/ashlee/BBS1.sized.jpg

will these rub??? anybody knows any info on those?
02-01-2007, 08:22 PM
mapid145

wait... are u trying to sell them.. cus its in the wrong forum.. but if u are.. u got pics on the rash
02-01-2007, 08:29 PM
lKoRTy

why woudl i try to sell them and ask if these will rub?
02-01-2007, 08:33 PM
pvu_rida

Quote:

Originally Posted by lKoRTy

why woudl i try to sell them and ask if these will rub?

because u said this

Quote:

Originally Posted by lKoRTy

"17" BBS RKs, silver finish and carbon fiber center caps. 2 are perfect and 2 have some rash on them. have tires w/ over 75% tread life. great wheels for winter or for a wife's car. these wheels are pretty expensive, new. but i only want 300 OBO and i stress the OBO.

Sounds like ur selling them to me
02-01-2007, 08:34 PM
lKoRTy

no its quotes from a guy whosd selling them locally lol.
so what do u guys think about them? good deal, not? will these fit/not, yada yada, hurrey!
02-01-2007, 08:34 PM
quicksilver22

Quote:

Originally Posted by pvu_rida

Quote:

Originally Posted by lKoRTy

why woudl i try to sell them and ask if these will rub?

because u said this

Quote:

Originally Posted by lKoRTy

"17" BBS RKs, silver finish and carbon fiber center caps. 2 are perfect and 2 have some rash on them. have tires w/ over 75% tread life. great wheels for winter or for a wife's car. these wheels are pretty expensive, new. but i only want 300 OBO and i stress the OBO.

Sounds like ur selling them to me

pwn3d.
02-01-2007, 08:36 PM
mapid145

do u have a drop or is it stock suspension.. if its stock.. i dont think it will rub..but then agian dont quote me on that
02-01-2007, 08:37 PM
lKoRTy

no i got gr2's with teins. com on ive been told in otehr thread 18's with 245 will rub.
lol
btw... offset is 35... will they stick out much?
02-01-2007, 08:57 PM
4g63lover

you should be fine with that series tire. I remember Reelax saying something about how that is the perfect tire for 17's. You should get it BBS wheels are hot. It'll look really good.
02-01-2007, 08:59 PM
lKoRTy

what about it's offset?
its 35.... will the stick out?
02-01-2007, 09:03 PM
glantv699

Hubcaps vs. BBS for $300

I think you know what wins....

and the measurements seem fine, hell if they don't work out, just resell them for 400
02-01-2007, 09:22 PM
lKoRTy

what do u have against my hubcaps lol.
02-01-2007, 09:33 PM
rez887

Quote:

Originally Posted by lKoRTy

what do u have against my hubcaps lol.

take them out and drive with the stock black wheels.
02-01-2007, 09:35 PM
rez887

Read this:
https://thegalantcenter.net/forum/vi...t=stock+offset
02-01-2007, 09:36 PM
lKoRTy

why would i want to drive with steelies lol.
02-01-2007, 09:40 PM
6G72gearhead

You think steelies look bad? vvvvvv
02-01-2007, 09:43 PM
pinoyesv6

hows the damage on the 2 rashed wheels. rubbing or not, i wouldn't even consider it if u had to replace or pay alot to repair the 2 wheels.
02-01-2007, 09:45 PM
lKoRTy

the rash wasnt bad. but the wheels just got sold :( oh well. still waiting.. lol
02-01-2007, 10:03 PM
Reelax

Re: Quick people!

Quote:

Originally Posted by lKoRTy

"35, 17x8"
" 225/45/17"
http://gallery.wewt.net/albums/ashlee/BBS1.sized.jpg

will these rub??? anybody knows any info on those?

do the math.

don't b so lazy.

i gave you all the information you would ever need to figure this one out if u sat down and did a little math.

i told you 17x7.5 +45mm 225/45r17 is perfect (also 18x7.5 +45 225/40r18 is perfect - and by perfect i mean 1 finger gap between sidewall and fender on suspension travel). so given that those measurements are "perfect" to get how much more these will stick out by adding 1/4" to each side of the wheel (the wheel is 8" wide so that is 1/2" wider than 7.5", so you add 1/2 of that to each side which means 1/4") and you add 10mm of negative offset (+35mm sticks out 10mm more than +45mm with the same wheel width). so add 1/4" and 10mm to see how much more these will stick out. obviously you can't add inches and mm so you have to convert 1 of them... let's convert the mm to inches since in america we are more familiar with measurements made in the standard scale (althought the metric scale makes way more sense). so i'll give you some info that u could have found in 2.1 seconds by typing in "google" in the address bar of your browser and hitting control+enter, to find the "standard to metric conversion"... 1"=25.2mm. so 25.2mm/1=10mm/x" where x is the unknown. 25.2mmx"=10mm(1") x=0.3968"=0.4" so now add 0.4" and 0.25" = 0.65" or roughly 2/3" so that's how much further than "perfect" they will stick out.

with 18x7.5 +45mm 225/40r18 lowered on H&R cut 1 coil i had less than a finger (1/2") clearance from tire to fender, but i never rubbed. a quarter is 1" wide so 2/3 of that is how much further out these will stick than what i had on my car b4.

17x8 +35mm 225/45r17 will fit your car. will they rub w/o fender rolling? probably... especially if you correct your rear camber, to avoid premature wear on the inside edge of your rear tire tread, as that pushes the tops of the wheels out even more. b prepared to roll/fold/cut out your rear fenders, or look for another set of wheels and tires.
02-01-2007, 10:17 PM
lKoRTy

you make it sound that its much easier just to get rims and tires separately lol.
02-01-2007, 10:27 PM
RedGalant2k1

Quote:

Originally Posted by lKoRTy

you make it sound that its much easier just to get rims and tires separately lol.

Find what makes you happy that fits your vehicle properly.

At stock ride height a 17x8" with a +35mm offset fits without rubbing. Its just like a EVO 8 wheel that several members have already. However if you have lowered, or plan to lower the vehicle it WILL rub, you WILL need to roll the fenders, possible a good bit, but members like ChicagoGTZ (or those who have EVO wheels would be your best sounding board.
02-01-2007, 11:03 PM
Reelax

Quote:

Originally Posted by lKoRTy

you make it sound that its much easier just to get rims and tires separately lol.

huh? i never said to get wheels and tires seperately. i said you have to get the right size of both for it to fit well. fine don't listen to me, listen to somebody that has done it (since i only have 19"x8.5"):

Quote:

Originally Posted by ChikagoGTZ

+35 offset will likely rub, I have 17x8 with a 35mm offset and it rubs in the back alot...but it does look good.

Quote:

Originally Posted by ChikagoGTZ

2000 GTZ
Springs - Tein S-tech lowered about 2.2 in front 1.5 in back.
Shocks - KYB AGX all set on 4

if you meant i make it sound like it is easier to get the right sizes new rather than used, then u are right. i bought my wheels and tires new so i could get the exact right sizes for my application without hoping that somebody was selling exactly what i wanted used.
02-01-2007, 11:20 PM
lKoRTy

nono, im not saying i not lissening to you, im just saying instead of waiting for the riht set of wheels with tires it will be easier to ger them separate lol.
02-01-2007, 11:35 PM
Reelax

Quote:

Originally Posted by lKoRTy

nono, im not saying i not lissening to you, im just saying instead of waiting for the riht set of wheels with tires it will be easier to ger them separate lol.

yup. that's why i bought mine new... actually the wheels i got were a brand new design so would have been waiting a LONG time to get them used.
02-02-2007, 08:30 PM
lKoRTy

ok well the wheels are up for sale again.
So here's the question. He will let me test-fit them. If i will see that they will stick out to the point where no matter if i roll the fenders or not they will hit it, then obviously i should get it. But if i see that rolling fenders will help - is it worth getting?
Alsom if fender rolling hard/damages the car, so on ?
02-02-2007, 09:37 PM
Serstylz2

jus search "rolling fenders" that has been talked about a whole bunch
02-02-2007, 09:44 PM
lKoRTy

well i can, but is it worth it? i mean is it really worth rolling them?
02-02-2007, 10:15 PM
pinoyesv6

Quote:

Originally Posted by lKoRTy

well i can, but is it worth it? i mean is it really worth rolling them?

if you really like the wheels

and the only way to make them fit is to roll the fenders,

would u want to rub aroudn wherever u go?
02-02-2007, 10:34 PM
lKoRTy

wouldnt i rub only when car goes down on bumps and such?
02-02-2007, 10:35 PM
Serstylz2

ROLL THE DAMN FENDERS AND GET THE DAMN RIMS
and shutup

:lol: :roll:
02-02-2007, 10:35 PM
pinoyesv6

if you don't roll, you probably will. if you do roll, you lessen the chances that you do rub.
02-02-2007, 10:37 PM
rez887

In one of the tutorial I saw someone used some professional tools to roll the fenders, where I can buy that tool?
02-02-2007, 10:38 PM
lKoRTy

but again, the rubbing will only occur when the car will travel down on bumps and such, correct?
02-02-2007, 10:39 PM
lKoRTy

Quote:

Originally Posted by rez887

In one of the tutorial I saw someone used some professional tools to roll the fenders, where I can buy that tool?

just use pliers :lol:
02-02-2007, 10:42 PM
rez887

Where I can get this, and whats the neme of it?

http://www.robsaudiworld.com/ROBSFENDERROLLER.jpg
02-02-2007, 10:55 PM
pinoyesv6

Quote:

Originally Posted by rez887

Where I can get this, and whats the neme of it?

http://www.robsaudiworld.com/ROBSFENDERROLLER.jpg

its a fender roller. its like $250
click click

or if you want, you can rent one. try locally and if that doesn't work
click click

but yea, if you're just gonna do your car, might as well pay someone to do it. it doesn't cost that much, and if they screw up, you have a finger to point at.
02-02-2007, 11:24 PM
krazienluv10

get an aluminum bat and roll it over between the fender and wheel... thats what my hommie did... u rolled the car foward in drive very slowly and folded it little by little... took about 15 mins for all 4 tires... Dont rush the fold all at once, just ease it in lil by lil
02-02-2007, 11:27 PM
krazienluv10

Quote:

Originally Posted by lKoRTy

but again, the rubbing will only occur when the car will travel down on bumps and such, correct?

the road is not perfectly smooth soo while ur driving it might be rubbing on the freeway... roll the fenders... :wink:
02-11-2007, 09:21 PM
rez887

Quote:

Originally Posted by pinoyesv6

Quote:

Originally Posted by rez887

Where I can get this, and whats the neme of it?

http://www.robsaudiworld.com/ROBSFENDERROLLER.jpg

its a fender roller. its like $250
click click

or if you want, you can rent one. try locally and if that doesn't work
click click

but yea, if you're just gonna do your car, might as well pay someone to do it. it doesn't cost that much, and if they screw up, you have a finger to point at.

Thanks so much Pinoy, I met him this weekend in Dallas and got the tool from him and saved on shipping!