What mods can make my 8g faster i have cai,exhaust,and ngk wires and plugs what can i get to make it faster
Printable View
What mods can make my 8g faster i have cai,exhaust,and ngk wires and plugs what can i get to make it faster
turbo, supercharger, 5 speed, the search button...
Nos!!!!!!!!!!!
blue shytz yo
Strip it ( spare tire, back seats, door panels, etc) take out the left headlight so more air cab be sucked in by the intake!
A VR-4 Spoiler, a JDM converison, rockets, neon lights, a VTEC decal, and Vin Diesel.
LMBO!
big coffee can muffler laundry rack, stickerssss
Roof scoop, ebay muffler, ebay computer chip, Evo XIII spoiler and paint the steelies red.
dont forget each rim has to be a different color, front rims are different than the rears
drive downhill only
you guys are asshole for leaving out the first mod you have to do before you even THINK of doing anything else.
TYPE RRRRRRRRRRRRRRRRRRRR stickers yo!
put a desk fan in front of the intake.
take off the rear and passanger seats to loose even more weight
Buy a bench spoiler and do a piggy back on a 747 carrier like this one
http://www.jimwcoleman.com/photoblog...n%20%20905.jpg
Not only you be faster than any conventional vehicles in the world you'd be flying in the process!!!!1!
turbine engine jet!!!!
Look buddy thats as far or fast your car is ganna get unless your going to turbocharge the stock motor.
So ecu chips dont work
you dont work
not for mitsubishi
Use the search feature, navigate the forum, you can take a 00-05 eclipse manual trans and swap it to your G search for that on the forum, swap a EVO head or Sonata head to make it DOHC, or swap a evo motor with stock turbo, all this mods are going to cost you but to understand them you need read more,so SEARCH, DO YOUR HOMEWORK and and you'll know.
clean the maf sensor.
oh and has anyone ever heard of "port-match"??? where you bore out the manifolds ports to the size of the gasket's openings with a grinder. ive heard of it done but never seen it or heard of a galant owner doing it.
i made one of those with a car fan blower. i didnt have switch on the inside so when i needed the turbo power, i touch the heavy gauge wires inside and i get fireworks all the time. that was with my mirage.
Dont even bother looking at these...they do absolutely nothing for you car. Chips do not work for Mitsubishis but make the computer and your RPMS go heywire.
You sound like you really want HP like right now within min, Im sorry its just not going to work with anycar unless you get a car that already comes with good HP or a turbo. Do research...save your money and look into a DOCH head swap/w Evo turbo...or stock 4g64 motor with turbo....or complete Evo swap. You can also look into picking up your trottle response by swaping intake manifold with 03 outlander manifold...you have to search. Come back when you know what you want.
so no one has ever heard of "port-matching"?
so umm.. anyone done an ecu reflash for the 8g?
if not i'll have to talk to the guy who cracked the 9g
:lol: you guys are horrible.
Driving downhill, piggyback rockets??? :lol:
to the original poster: seriously, use the search button. some mods are Intake/Exhaust/Headers, Outlander Intake Manifold, Ecuflash. Others are Manual tranny swap, 14b/16G turbocharger, Evo/Hyundai Head.
search and you will
[QUOTE=IVORY_G;570733]A VR-4 Spoiler, a JDM converison, rockets, neon lights, a VTEC decal, and Vin Diesel.
LMAO!!!!
Good god man... grinder?????? I ported and polished the head on my 7g with a dremel at LOW speed. Aluminum doesnt like to be cut fast at all. With a die grinder youll go through the head in like 4 seconds.... The intake manifold is port matched as well. doing a 5 speed swap, head work, balance shaft removal and a bigger throttle body shaved 2 whole seconds off of my 1/8 mile time and that was without any exhaust work done.